Introduction
Welcome to the user manual for your new FEKER IK105 Plus or IK105 Pro Mechanical Keyboard. This keyboard is designed for an exceptional typing experience, featuring a Gasket Mount structure, hot-swappable switches, and versatile triple-mode connectivity. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your keyboard.


Package Contents
Please check the box for the following items:
- 1 x FEKER IK105 Mechanical Keyboard
- 1 x Type-C Cable
- 1 x 2.4G Receiver
- 2 x Extra Switches (White Jade Switches V2 / MuLan Switches, depending on model)
- 5 x FEKER Mint Switches (Extra Gift)
- 1 x Keycap & Switch Puller
- 1 x Dustproof Cover
- 1 x User Manual (this document)
Setup Instructions
1. Connecting Your Keyboard
The FEKER IK105 keyboard supports three connection modes: Bluetooth 5.0, 2.4G Wireless, and Wired (Type-C USB).

- 2.4G Wireless Mode:
- Locate the 2.4G receiver (usually stored in a compartment on the keyboard).
- Plug the 2.4G receiver into an available USB port on your computer.
- Switch the keyboard to 2.4G mode (refer to the keyboard's physical switch or function key combination). The keyboard should connect automatically.
- Bluetooth 5.0 Mode:
- Switch the keyboard to Bluetooth mode.
- On your device (computer, laptop, tablet, or phone), enable Bluetooth and search for new devices.
- Select "FEKER IK105" (or similar name) from the list of available devices to pair.
- Follow any on-screen prompts to complete the pairing process.
- Wired (Type-C USB) Mode:
- Connect one end of the provided Type-C USB cable to the keyboard's Type-C port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will automatically switch to wired mode and begin charging.
2. Hot-Swappable Switches
The FEKER IK105 features hot-swappable terminals, allowing you to change switches without soldering. It is compatible with Cherry MX, Kailh, Gateron, and other 3-pin or 5-pin mechanical switches.
- To remove a switch, use the included switch puller to gently grip the switch and pull it straight up.
- To install a new switch, align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
- Gently press the switch down until it clicks into place. Do not force it.

Operating Instructions
1. RGB Backlight Control
The keyboard features 16.8 million RGB backlight options. Use the designated function keys (often Fn + arrow keys or other specific keys) to cycle through various lighting effects, adjust brightness, and change colors. Refer to the keyboard's specific key combinations for detailed control.
2. Digital Screen and Knob (IK105 Pro Only)
The IK105 Pro model includes a digital screen and a knob for enhanced control. The screen typically displays information such as connection mode, battery level, and active profile. The knob can be used to adjust volume, backlight brightness, or cycle through lighting modes, depending on the current function.

3. Keycap Profiles
The IK105 Plus typically comes with MDA PBT Keycaps, while the IK105 Pro features JSA PBT Keycaps. Both are dye-sublimated for durability and clear legends.
Maintenance
1. Cleaning
- Use the included dustproof cover when the keyboard is not in use to prevent dust accumulation.
- To clean keycaps, gently remove them using the keycap puller. Wipe them with a soft, damp cloth.
- Use a soft brush or compressed air to clean dust and debris from between the switches.
- Wipe the keyboard case with a dry or slightly damp cloth. Avoid harsh chemicals.
2. Switch and Stabilizer Care
Your FEKER keyboard comes with pre-lubed switches (White Jade V2 or MuLan) and stabilizers for optimal performance and sound. While manual lubrication ensures better consistency, over time, you may consider re-lubing if you notice changes in feel or sound. Always use appropriate lubricants designed for mechanical keyboard switches and stabilizers.

Troubleshooting
1. Connectivity Issues
- 2.4G Wireless: Ensure the 2.4G receiver is securely plugged into a USB port and the keyboard is switched to 2.4G mode. Try a different USB port.
- Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in pairing mode. Remove previous pairings and try re-pairing. Ensure the keyboard is sufficiently charged.
- Wired: Check the Type-C cable connection at both ends. Try a different Type-C cable or USB port.
2. Backlight Not Working / Incorrectly Displaying
- Ensure the backlight is not turned off or set to minimum brightness. Use the function keys to adjust.
- If specific keys are not lighting up, check if the switches are properly seated or if the switch itself is faulty (if hot-swapped).
3. Keys Not Responding
- For hot-swappable switches, ensure the switch is fully seated and its pins are not bent. Try reseating or replacing the switch.
- Ensure the keyboard is in the correct connection mode (wired, 2.4G, or Bluetooth).
- Check for low battery if in wireless mode.
4. Charging
The keyboard has two Type-C ports: a Fast Charge Port and a Slow Charge Port. Note that the keyboard cannot be used while charging via the Fast Charge Port, but it can be used while charging via the Slow Charge Port.

Specifications
General Specifications
| Feature | Detail |
|---|---|
| Brand | Feker |
| Layout | 100% Layout |
| Keys Amount | 103/104 Keys |
| Structure | Gasket Mount |
| Position Plate | Slotted PC |
| Hotswappable | 3/5pin Mechanical Switches |
| Keycup Printing | Dye-sublimation |
| Keycup Material | PBT plastic |
| Case Material | PBT case |
| Filler | Pom Foam + PET Foam + Silicon Pad |
| Connection | Triple Mode (USB Wired + Bluetooth 5.0 + 2.4G) |
| Backlight | 16.8 Million RGB Backlit (MULTICOLOR) |
| Anti-Ghost Key | NKRO (N-Key Rollover) |
| Cable | Detachable Type-C USB Cable |
| Compatibility | Windows 7/8/9/10/11, Mac, Linux, Android, iOS |
| Style | Standard, Ergonomics |
| Wrist Support | No |
| Application | Desktop, Laptop, Number, Tablet |
| Weight | Approx. 1050g |
| Dimensions | 42cm x 14cm (approx.) |
Model-Specific Differences

| Feature | IK105 Plus | IK105 Pro |
|---|---|---|
| Connection | 3 Modes | 3 Modes |
| Structure | Gasket Mount | Gasket Mount |
| Color | Black/White | MuLan Theme |
| Digital Screen | No | Yes |
| Knob | No | Yes |
| Battery | 4000mAh | 8000mAh |
| Keycaps | MDA PBT Keycaps | JSA PBT Keycaps |
| Switches | White Jade V2 Switches | MuLan Switches |
| POM Foam | Yes | Yes |
| PET Foam | Yes | Yes |
| Silicon Pad | Yes | Yes |
User Tips
- For optimal typing feel, ensure all switches are fully seated after any hot-swapping.
- Experiment with different RGB lighting modes to find your preferred aesthetic.
- If experiencing input lag in wireless modes, try moving closer to the receiver or device, or switch to wired mode.
- Regularly clean your keyboard with the provided dust cover and a soft brush to maintain its appearance and functionality.
Warranty and Support
For warranty information and technical support, please refer to the official Feker website or contact your retailer. Keep your purchase receipt as proof of purchase.