AULA F87

Contents

AULA F87 Mechanical Keyboard User Manual

Model: F87 Pro (3-Mode Connection Version)

1. Introduction

Thank you for choosing the AULA F87 Mechanical Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard. The AULA F87 Pro is an 87-key layout mechanical keyboard featuring a GASKET structure, hot-swappable switches, and versatile 3-mode connectivity (Wired, 2.4G Wireless, and Bluetooth). It is designed for a delicate and soft hand feeling, responsive keys, and customizable RGB lighting.

AULA F87 Pro Mechanical Keyboard with features highlighted
AULA F87 Pro Mechanical Keyboard showcasing its key features: 3 Modes, Gasket-Mount, Full Hot-Swap, Pre-Lubricated Switch, 4000mAh battery, Full RGB Backlight, Five-Layer Padding, and N-Key Rollover.

2. Setup

2.1. Connection Modes

The AULA F87 Pro supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth. Use the mode switch located on the keyboard to select your desired connection type.

Diagram showing the 3 connection modes: 2.4Ghz Wireless, Bluetooth, and Type-C Wired, with the mode switch and ports labeled.
Overview of the keyboard's 3 connection modes and the physical switch for selection.

2.1.1. Wired Mode

  1. Switch the mode switch to the [USB/OFF] position.
  2. Plug the Type-C cable into the port on the keyboard.
  3. Connect the other end of the USB cable to your computer's USB port.

2.1.2. 2.4G Wireless Connection

  1. Switch the mode switch to the [2.4G] position.
  2. Remove the USB Receiver from the upper right corner slot of the keyboard.
  3. Short press FN + ~ to enter 2.4G Mode.
  4. Plug the USB receiver into your computer's USB port.
  5. Manual Pairing (if needed): Long press the key combination FN + - for about 3 seconds. The - key will flash cyan rapidly, indicating the keyboard is in code pairing state. Plug the USB receiver into your computer's USB port to complete pairing.

2.1.3. Bluetooth Connection

  1. Switch the mode switch to the [Bluetooth] position.
  2. Long press the key combination FN + 1 (for Device 1) for about 3 seconds. The 1 key will flash cyan rapidly, indicating the keyboard is in code pairing state.
  3. On your device (computer, phone, or tablet), search for Bluetooth devices.
  4. Select either [AULA-F87 3.0] or [AULA-F87 5.0] from the list. The blue light will turn on for 2 seconds after a successful connection.
  5. To connect to other devices, repeat step 2 using FN + 2 or FN + 3.

2.2. Charging Instructions

To charge the keyboard, connect it to your computer via the provided USB Type-C cable. The RGB ambient light bar will show a streamer effect during charging. The green light will stay on when fully charged.

  • Important: Do not use fast chargers or charging heads with high voltage/current to charge the keyboard. Use only the computer's USB port or a standard 5V/600mA charger.
  • If the keyboard is not used for a long time, please turn off the power switch.

You can check the keyboard's power level in 2.4G/Bluetooth mode (when not plugged in via USB) by pressing FN + B. The green light indicates a full charge, and as power is consumed, the green light gradually decreases. A low battery indicator will turn red.

3. Operating Instructions

3.1. Backlight Effect Adjustment

The keyboard features 16 switchable RGB lighting effects. Use the following key combinations to adjust them:

  • FN + INS: Switch between 16 light effects.
  • FN + DEL: Adjust light color.
  • FN + ↑: Increase light brightness.
  • FN + ↓: Reduce light brightness.
  • FN + ← / →: Adjust light speed.
Diagram showing FN key combinations for RGB backlight adjustment
FN key combinations for adjusting RGB backlight modes, colors, brightness, and speed.

3.2. RGB Light Strip and Sidelight Adjustment

  • RGB Light Strip: Use FN + Shift to switch light effect modes and colors.
  • RGB Sidelight: Use FN + ? to adjust the color of the side light.
Image of the keyboard's RGB side lighting
The keyboard features customizable RGB side lighting.

3.3. OS Switching

The keyboard supports different operating system modes to optimize key functions:

  • FN + W: Switch to WINDOWS system mode (W key red light flashes for 3s).
  • FN + Q: Switch to Android system mode (Q key red light flashes for 3s).
  • FN + E: Switch to MAC system mode (E key red light flashes for 3s).
  • FN + R: Switch to IOS system mode (R key red light flashes for 3s).

In Windows system, FN + WIN will lock/unlock the WIN key (indicator light on when locked). Under MAC/IOS system mode, the position of WIN and ALT keys will be exchanged, and F1-F12 become multimedia function buttons.

3.4. Key Combo Descriptions (F1-F12 Functions)

The F1-F12 keys have different functions depending on the operating system mode. Below is a general guide:

KeyWindows Mode (FN+W)Android Mode (FN+Q)MAC Mode (FN+E)IOS Mode (FN+R)
FN+1Bluetooth device 1 matching
FN+2Bluetooth device 2 matching
FN+3Bluetooth device 3 matching
FN+F1DesktopBrightness -Brightness -Brightness -
FN+F2MailBrightness +Brightness +Screen Brightness +
FN+F3Convert WindowConvert WindowConvert Window
FN+F4Open ExplorerBack to DesktopBack to DesktopBack to Desktop
FN+F5Brightness -Brightness -Brightness -
FN+F6Brightness +Brightness +Brightness +Light Brightness +
FN+F7Previous SongPrevious SongPrevious SongPrevious Song
FN+F8Play/PausePlay/PausePlay/PausePlay/Pause
FN+F9Next SongNext SongNext SongNext Song
FN+F10MuteMuteMuteMute
FN+F11Volume -Volume -Volume -Volume -
FN+F12Volume +Volume +Volume +Volume +

3.5. Intelligent Standby Mode

In Bluetooth/2.4G mode, the keyboard automatically enters a power-saving mode (lights off) after one minute of inactivity. To wake up the keyboard, simply press any key.

3.6. Indicator Light Description

Press and hold the FN key to view the current link mode (2.4G, Bluetooth, wired), current Bluetooth channel (1/2/3), and current system mode (Android, Win, Mac, iOS). The corresponding keys will light up. Release FN to restore the normal lighting effect.

  • 2.4G mode indicator: ~ key
  • Wired mode indicator: 4 key
  • Bluetooth channel indicators: 1, 2, 3 keys
  • Operating system mode indicators: Q, W, E, R keys

3.7. Programmable Software

The AULA F87 Pro offers programmable software for customization. This custom software is compatible only with WINDOWS operating systems and is not supported on MAC OS systems.

Screenshot of the AULA F87 Pro programmable software interface on a Windows computer.
The programmable software allows customization of lighting effects and key assignments on Windows systems.
Screenshot of the driver macro programming interface showing RGB light effect and macro settings.
Driver Macro Programming interface for RGB light effects and multiple modes.

4. Maintenance

4.1. General Care

  • Keep the keyboard clean by regularly wiping it with a soft, dry cloth.
  • Avoid exposing the keyboard to excessive moisture or extreme temperatures.
  • Do not use harsh chemicals or abrasive cleaners.

4.2. Hot-Swappable Switches

The AULA F87 Pro features a full hot-swappable PCB, supporting 3-pin or 5-pin mechanical switches. This allows users to easily replace switches for customization or repair without soldering.

Close-up of a keyboard switch being removed with a switch puller, demonstrating the hot-swappable feature.
The hot-swappable PCB allows for easy replacement of switches.
Image showing a switch being removed from the keyboard with a tool, illustrating the full key shaft seat hot-swappable feature.
Free replacement of shaft body, supporting 5-pin/3-pin switches.

5. Troubleshooting

5.1. Connection Issues

  • 2.4G Wireless: Ensure the USB receiver is properly plugged into your computer and the keyboard is in 2.4G mode. If connection fails, try manual pairing (FN + - for 3 seconds).
  • Bluetooth: Ensure the keyboard is in Bluetooth mode and the correct device channel (1, 2, or 3) is selected. Check your device's Bluetooth settings to ensure it's discoverable and paired with the keyboard.
  • Wired: Ensure the Type-C cable is securely connected to both the keyboard and your computer.

5.2. Charging Problems

  • Ensure you are using a standard USB port for charging (e.g., from a computer) and not a fast charger.
  • Check the charging cable for any damage.
  • If the battery indicator remains red, ensure the keyboard is properly connected for charging.

5.3. Keyboard Unresponsive / Unexpected Behavior

  • Restore Factory Settings: Long press FN + ESC for three seconds to restore the keyboard to its default state. Note that connected Bluetooth devices will not be cleared.
  • Ensure the keyboard is not in intelligent standby mode (press any key to wake).
  • Verify the correct operating system mode is selected (Windows, Android, Mac, iOS).

6. Specifications

FeatureDetail
ModelF87 / F87 Pro
Number of Keys87 Keys
Layout80% Minimalist Layout
Connection MethodWired (Type-C), 2.4G Wireless, Bluetooth (Tri-Mode)
Keycap MaterialPBT plastic (Two-color injection molding process)
SwitchesHot-swappable (supports 3-pin or 5-pin mechanical switches)
Operation StyleMechanical
Backlight TypeMULTICOLOR (Full RGB Backlight, RGB Side Light)
Battery Capacity4000mAh Rechargeable Lithium Battery
Charging InterfaceType-C
Charging Voltage/CurrentDC 5V / 600mA
Rated VoltageDC 3.7V (fully charged 4.2V)
Rated Current180mA @3.7V (default lighting), 15mA (all lights off)
Battery LifeApprox. 22 hours (default light effect), Approx. 26 hours (all lights off)
Polling Rate125Hz
Anti-GhostingAll keys anti-ghosting for all connection modes
Total Travel4.0mm
Dimensions365.90 × 139.00 × 41.10 ± 1mm
WeightApprox. 916g (without cable receiver), Approx. 935g (with cable receiver)
ApplicationDesktop, Laptop, Number
CertificationCE
Icons representing key product features: Gasket structure, Hot swap, 1.2mm PCB single key slot, 87 key layout, Silencer cotton, Shaft seat cotton + silicone, ixpe shaft underpad, 3ms delay, Own brand shaft body, Two-color PBT key cap, RGB backlight, 4000mAh battery.
Key features of the AULA F87 Pro Mechanical Keyboard.
Diagram illustrating different switch types (Blue, Space Gold, Grey Wood V4, flexible shaft V3) with their specifications like conduction pressure, stroke, and bottom pressure.
Multiple options for Axis Selection, each with distinct tactile and sound characteristics.
Exploded view diagram of the keyboard layers showing 5-layer filling for noise reduction, including dual color PBT keycap, upper cover, axial body, silicone gasket, PC positioning board, PORON cotton, IXPE shaft bottom pad, PET sound pad, single key slotted PCBA board, bottom cotton of shaft seat, silicone underlay, and bottom shell.
Detailed diagram of the 5-layer filling noise reduction structure.

7. User Tips

  • Sound and Feel: Many users praise the pleasant and quiet sound profile, often described as 'creamy'. The Gasket structure contributes to a comfortable typing experience.
  • Switch Customization: The hot-swappable design allows for easy experimentation with different switch types. If you're not satisfied with the default switches, consider trying others to find your preferred feel and sound.
  • Charging Caution: Always use a standard USB port (e.g., from your computer) for charging. Avoid using fast chargers to prevent potential damage to the keyboard's battery.
  • Packaging: While the keyboard itself is highly rated, some users have noted that the packaging could be improved. Inspect your keyboard upon arrival.

8. Warranty & Support

For detailed warranty information and technical support, please refer to the official AULA website or contact your retailer. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.