1. Introduction
This manual provides comprehensive instructions for the Cada Power Functions Set, designed to enhance your building block creations with dynamic movement and control. This set includes various motors, a lithium battery box, and a remote controller, offering advanced functionality for compatible building block models such as the Cada C64004w, C64004, and 64004 series.
Please read this manual carefully before use to ensure proper assembly, operation, and maintenance of your power functions set.
2. Safety Information
- WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Age Recommendation: This product is recommended for ages 6-12 years, 14+ years, and 18+ years. Adult supervision is recommended for younger users.
- Choking Hazard: Contains small parts. Not suitable for children under 3 years old.
- Do Not Eat: Components are not edible. Keep away from mouth.
- Keep electronic components away from water and excessive heat.
- Do not attempt to modify or disassemble the battery box or motors.
3. Product Components
The Cada Power Functions Set typically includes the following components:
- Remote Controller (x1): Used to wirelessly control the motors.
- USB Cable (x1): For charging the Lithium Battery Box.
- L Motor (x2): Powerful motors suitable for driving functions.
- Servo Motor (x1): Precision motor ideal for steering or controlled movements.
- Lithium Battery Box (x1): Provides power to the motors and is rechargeable.
4. Setup Instructions
Follow these steps to set up your Cada Power Functions Set:
- Charge the Lithium Battery Box:
- Connect the provided USB cable to the Lithium Battery Box.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer USB port.
- Allow the battery box to charge fully before first use. An indicator light on the battery box will typically show charging status (e.g., red for charging, green for fully charged).
- Integrate into your Building Block Model:
- Carefully integrate the L Motors and Servo Motor into your building block model according to your design or the model's specific instructions (e.g., Cada C64004w).
- Ensure motors are securely attached and their axles are free to rotate without obstruction.
- Connect Motors to Battery Box:
- Connect the cables from the L Motors and Servo Motor to the appropriate ports on the Lithium Battery Box. The battery box usually has multiple ports to accommodate different motors.
- Ensure connections are firm.
- Power On:
- Turn on the Lithium Battery Box using its power switch.
- Turn on the Remote Controller. It should automatically pair with the battery box. If not, refer to the troubleshooting section.
5. Operating Instructions
Once set up, use the remote controller to operate your model:
- L Motors: The L Motors are typically used for propulsion. Use the corresponding levers or buttons on the remote control to move your model forward, backward, or control speed.
- Servo Motor: The Servo Motor provides precise rotational control, often used for steering mechanisms. Use the designated controls on the remote to turn the steering left or right.
- Experiment with the remote control's various buttons and levers to understand their functions and how they interact with the connected motors.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surfaces of the motors, battery box, and remote control. Do not use water or cleaning solutions directly on electronic components.
- Storage: Store the set in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care:
- Recharge the Lithium Battery Box when its performance diminishes.
- Do not overcharge or completely drain the battery for extended periods.
- If storing for a long time, charge the battery to about 50% capacity.
- Inspection: Periodically check all cables and connectors for signs of wear or damage. Replace any damaged parts immediately.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motors not responding. |
|
|
| Weak motor performance. |
|
|
| Remote controller not working. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | pinlepai |
| Model Number | bricks technical motor |
| Compatible For | cada c64004w, cada c64004, cada 64004 |
| Material | Plastic (ABS) |
| Block Size | Small building block (Compatible with Lego) |
| Certification | CE |
| Certificate Number | U01801230220101-1E |
| Is Electric | No Battery (refers to the set not including separate disposable batteries, but a rechargeable Lithium Battery Box is included) |
| Gender | Unisex |
| Recommend Age | 6-12Y, 14+y, 18+ |
| Origin | Mainland China |
Package Dimensions:
- Length: 25 cm
- Width: 20 cm
- Height: 15 cm
- Weight: 0.4 kg
9. Warranty and Support
Specific warranty details for this product are not provided in the available information. For any warranty claims or technical support, please contact the seller directly through the platform where the purchase was made.
Returns: This product may be eligible for free returns within 90 days of purchase. Please refer to the seller's return policy for full details.