M5Stack ATOMIC CANBus Base (CA-IS3050G)

Contents

M5Stack ATOMIC CANBus Base (CA-IS3050G)

User Instruction Manual

1. Introduction

The M5Stack ATOMIC CANBus Base (CA-IS3050G) is a compact CAN bus communication unit designed for seamless integration with M5Stack's ATOM series controllers. It utilizes the CA-IS3050G transceiver solution, featuring a built-in DC-DC isolated power supply chip that effectively isolates interference and prevents damage to sensitive circuits. This base is ideal for applications requiring robust and reliable CAN bus communication, such as vehicle transportation, industrial field control, and security systems.

The communication bus supports up to 110 nodes, offering excellent scalability for various projects. It boasts a signal transmission rate of up to 1Mbps, ensuring high-speed and efficient data transfer.

M5Stack ATOMIC CANBus Base with terminal and bottom view

Figure 1: ATOMIC CANBus Base (CA-IS3050G) with included terminal and bottom view.

2. Features

  • Compatible with Atom-Matrix, Atom-Lite, ATOMS3, and AtomS3-Lite controllers.
  • Supports CAN bus multi-point communication.
  • Built-in isolated DC-DC power supply for enhanced safety and noise immunity.
  • Signal transmission rate up to 1Mbps.
  • Common-mode voltage range from -12V to +12V.
  • Integrated signal protection functions (e.g., over-voltage protection, failure protection, over-temperature protection).

3. What's Included

  • 1 x ATOMIC CANBus Base (CA-IS3050G)
  • 1 x HT3.96-4P Terminal
Product packaging for M5Stack ATOMIC CANBus Base

Figure 2: Product packaging.

4. Specifications

Specifications table for M5Stack ATOMIC CANBus Base

Figure 3: Detailed product specifications.

Table 1: ATOMIC CANBus Base Specifications
Specification Parameter
External Port HT3.96-4P
CAN Transceiver Model CA-IS3050G
Maximum Rate 1Mbps
Supported Nodes 110
Low Loop Delay 150ns
Common-mode Voltage -12V ~ 12V
Operating Temperature 0 ~ 40°C
Casing Material Plastic (PC)
Product Size 24 x 48 x 18mm
Package Size 136 x 92 x 20mm
Product Weight 11.1g
Gross Weight 15.6g
Dimensional drawing of the ATOMIC CANBus Base

Figure 4: Dimensional drawing (Unit: mm).

5. Pin Map

The following table and image detail the pin assignments for the ATOMIC CANBus Base.

Pin map diagram for M5Stack ATOMIC CANBus Base

Figure 5: Pin map diagram.

Table 2: ATOMIC CANBus Base Pin Assignments
PIN LEFT RIGHT PIN
1 3V3
2 3 UART_TX
4 5 UART_RX
5V 6 7
GND 8 9

GPIO mapping for different ATOM series controllers:

Table 3: ATOMIC CAN Base GPIO Mapping
ATOMIC CAN Base CAN_TX CAN_RX 5V GND
ATOM LITE GPIO22 GPIO19 5V GND
ATOMS3 GPIO5 GPIO6 5V GND
ATOM LITE GPIO5 GPIO6 5V GND
ATOM Matrix GPIO22 GPIO19 5V GND

6. Schematics

The internal circuit diagram of the ATOMIC CANBus Base is provided below for advanced users and troubleshooting.

Schematic diagram of the M5Stack ATOMIC CANBus Base

Figure 6: Schematic diagram.

7. Applications

The ATOMIC CANBus Base is suitable for a variety of applications, including but not limited to:

  • CAN bus communication systems
  • Vehicle equipment control
  • Industrial field control
  • Internet of Things (IoT) projects requiring robust communication

8. Setup Instructions

To set up your ATOMIC CANBus Base, follow these steps:

  1. Connect to ATOM Controller: Align the ATOMIC CANBus Base with your chosen ATOM series controller (e.g., Atom Matrix, Atom Lite, ATOMS3) and gently press them together until securely connected.
  2. Wire the CAN Bus: Use the provided HT3.96-4P terminal to connect to your CAN bus network. Ensure correct polarity for CAN_H and CAN_L lines. Refer to the Pin Map (Table 2) for specific connections.
  3. Power Supply: The ATOMIC CANBus Base draws power from the ATOM controller. Ensure your ATOM controller is adequately powered.
  4. Software Configuration: Depending on your ATOM controller and development environment (Arduino, UiFlow), you will need to configure the CAN communication. Refer to the 'Software & Resources' section for relevant documentation.

Video 1: ATOMIC CAN Bus Communication Example, demonstrating multiple units communicating.

9. Operating Instructions

Once the hardware is set up and the software is configured, the ATOMIC CANBus Base facilitates communication over the CAN bus. The operation typically involves:

  1. Initialization: In your code, initialize the CAN transceiver with the desired baud rate (up to 1Mbps).
  2. Sending Data: Use the appropriate CAN library functions to construct and send CAN messages.
  3. Receiving Data: Implement a mechanism to read incoming CAN messages. This often involves an interrupt service routine (ISR) or polling.
  4. Error Handling: Monitor for CAN bus errors and implement error handling routines as necessary for robust communication.

For detailed programming examples and API usage, refer to the software documentation linked in the 'Software & Resources' section.

10. Maintenance

The ATOMIC CANBus Base is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Keep Clean: Ensure the module is free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
  • Avoid Physical Damage: Handle the module with care to prevent damage to the PCB or connectors.
  • Proper Storage: Store the module in a dry, cool environment when not in use.
  • Firmware Updates: Periodically check the M5Stack official website for any firmware updates for your ATOM controller or CAN bus libraries, which may improve performance or add features.

11. Troubleshooting

If you encounter issues with your ATOMIC CANBus Base, consider the following:

  • No Communication:
    • Verify all physical connections, especially CAN_H, CAN_L, 5V, and GND.
    • Check the baud rate configuration in your software; it must match the baud rate of the CAN bus network.
    • Ensure proper termination resistors are present on the CAN bus (typically 120 ohms at each end of the bus).
    • Confirm that the ATOM controller is powered correctly.
  • Intermittent Communication:
    • Check for loose connections or damaged wiring.
    • Inspect for electromagnetic interference (EMI) sources near the CAN bus lines.
    • Ensure the common-mode voltage is within the specified -12V to +12V range.
  • Module Not Recognized:
    • Ensure the ATOMIC CANBus Base is correctly seated on the ATOM controller.
    • Verify that the ATOM controller's firmware and libraries are up to date.

For further assistance, consult the M5Stack official documentation or community forums.

12. User Tips

  • When working with multiple CAN devices, clearly label your master and slave units to avoid confusion during setup and debugging.
  • Always double-check your wiring before powering on to prevent potential damage to the module or other components.
  • Utilize the provided PDF manual for in-depth technical details and advanced configurations.

13. Software & Resources

For detailed programming guides, datasheets, and software tools, please refer to the following resources:

  • User Manual (PDF): Download PDF
  • Datasheet (CA-IS3050G): Refer to the official M5Stack documentation for the CA-IS3050G datasheet.
  • Arduino:
    • Atom CAN Base Arduino Quick Start
  • UiFlow1:
    • Atom CAN UiFlow1 Docs
  • UiFlow2:
    • Atomic CAN Base UiFlow2 Docs
  • EasyLoader:

14. Warranty and Support

M5Stack products are designed for quality and reliability. For information regarding product warranty, technical support, and customer service, please visit the official M5Stack website or contact their authorized distributors. Keep your purchase receipt for warranty claims.

© 2024 M5Stack. All rights reserved.

This manual is subject to change without notice. Please refer to the official M5Stack website for the latest version.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.