1. Product Overview
The Dexnor Protective Case is designed to provide robust, full-body protection for your iPad 9.7 Inch (2017/2018 models). It features a dual-layer hybrid construction, an integrated screen protector, a convenient pen holder, and a multi-angle kickstand for versatile use.
Key Features:
- Dual-layer Hybrid Protection: Combines a shock-absorbing TPU frame with a hard, drop-resistant Polycarbonate back.
- Integrated Screen Protector: Prevents scratches without compromising touch sensitivity.
- Pen Holder: Conveniently stores your stylus pen.
- Multi-Angle Kickstand: Provides stable viewing angles and can double as a handle.
- Reinforced Corners: Equipped with BumperShock Cushion for military-grade drop protection (MIL STD 810G-516.6).
- Hollow Back Design: Facilitates heat dissipation without adding significant weight.
2. Compatibility
This case is exclusively designed for the following iPad 9.7 Inch models:
- iPad 9.7 Inch (2017/2018)
- Compatible Model Numbers: A1893, A1954 (Wi-Fi + Cellular & GPS), A1822, A1823 (Wi-Fi only, w/o GPS)
ATTENTION: This case is NOT compatible with iPad Air (2019) or iPad 9th Generation 10.2 Inch (2021).
How to Check Your Tablet Model:
- Go to Settings on your iPad.
- Navigate to About Tablet (or About Device/General > About).
3. Setup Instructions
3.1 Assembling Steps:
- Tear off the protective film from the integrated screen protector on the front cover.
- Carefully install the front cover onto your iPad, ensuring all edges align.
- Install the back cover onto the tablet, snapping it securely into place around the front cover.
3.2 Disassembling Steps:
- Gently pry the bottom-right corner of the back cover to begin detaching it.
- Carefully remove the entire back cover.
- Remove the front cover from your iPad.
4. Operating Instructions
4.1 Using the Kickstand:
- Locate the foldable kickstand on the back of the case.
- Pull out the kickstand until it clicks into an open position.
- Fix the kickstand in place by adjusting it to your desired viewing angle (horizontal or vertical).
4.2 Using the Stylus Holder:
The case includes a dedicated slot for your stylus pen. Simply insert your stylus into the holder for secure storage and easy access when needed.
4.3 General Use:
- Ensure the case is properly installed to maximize protection against drops and impacts.
- The integrated screen protector is designed to be scratch-resistant; avoid using sharp objects directly on its surface.
- The non-slip texture on the back cover enhances grip and prevents accidental slips.
5. Maintenance
To ensure the longevity and effectiveness of your Dexnor protective case, follow these simple maintenance guidelines:
- Cleaning: Wipe the case regularly with a soft, damp cloth to remove dust and smudges. For stubborn dirt, a mild soap solution can be used, followed by a clean, damp cloth.
- Avoid Harsh Chemicals: Do not use strong cleaning agents, solvents, or abrasive materials, as these can damage the case's finish and materials.
- Inspect Regularly: Periodically check the case for any signs of wear or damage, especially around the edges and corners, to ensure continued protection.
- Screen Protector Care: While scratch-resistant, avoid direct contact with sharp objects to maintain clarity and sensitivity.
6. Troubleshooting
- Case doesn't fit: Double-check your iPad model against the compatibility section (Section 2). Ensure you have an iPad 9.7 Inch (2017/2018).
- Difficulty installing/removing: Refer to the detailed assembly and disassembly steps in Section 3. Ensure you are applying even pressure and starting from the correct corners.
- Screen protector issues: If touch sensitivity is reduced, ensure the screen protector is clean and free of air bubbles. Re-installation might be necessary if alignment is off.
- Kickstand not stable: Ensure the kickstand is fully extended and locked into its designated position. Avoid placing the tablet on uneven surfaces.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | DEXNOR |
| Compatible Brand | For Apple iPad |
| For iPad Model | iPad 9.7 inch 2017, iPad Pro 9.7" (2016) |
| Model Number | Case for iPad 9.7 Inch 6th/5th Generation |
| Material | Plastic (PC and TPU) |
| Type | Protective Shell/Skin |
| Application Laptop Size | 9.7" |
| Feature | Shockproof, Anti-Dust, Hard, Built-in Screen Protector, Pen Holder, Kickstand |
| Style | Fashion |
| Length | 9.7 inch |
| Battery Included | No |
| High-concerned chemical | None |
| Package Length | 32 cm |
| Package Width | 12 cm |
| Package Height | 5 cm |
| Package Weight | 0.39 kg |
8. User Tips
- Optimal Heat Dissipation: The hollow back design helps dissipate heat from your iPad, especially during extended use. Ensure the back is not obstructed for best performance.
- Versatile Viewing: Utilize the multi-angle kickstand for both horizontal and vertical viewing, making it ideal for watching videos, typing, or video calls.
- Stylus Security: Always store your stylus in the integrated holder to prevent loss and keep it readily available for notes or drawing.
- Enhanced Grip: The non-slip texture on the case provides a secure grip, reducing the chance of accidental drops.
- Gaming Comfort: The case's design, including joystick-like contours, is optimized for comfortable thumb positioning during gaming sessions.
9. Warranty and Support
For specific warranty information and customer support, please refer to the seller's policies or contact the DEXNOR Official Store directly.
Additional item guides and documents, including a detailed user manual in PDF format, can be found at: User manual (PDF)