1. Introduction
The PowMr Mini Solar Charge Controller is a compact and robust device designed for small power systems, street lighting, and various solar applications. It features an industrial-grade main control chip, supporting 5V or 12V systems with a 5A or 10A charging current and a maximum PV input voltage of 22V. This controller offers multiple protection mechanisms and a three-stage charging algorithm to optimize battery performance, ensuring stable and safe operation with low heat generation.
Video: Product unboxing and overview of the PowMr Mini Solar Charge Controller.
2. Safety Instructions
- Ensure your battery has sufficient voltage for the controller to recognize the battery type before the initial installation.
- The battery cable should be as short as possible to minimize loss and ensure efficient power transfer.
- This regulator is exclusively designed for lead-acid batteries, including OPEN, AGM, and GEL types. It is NOT suitable for nickel-metal hydride, lithium-ion, or other battery chemistries.
- The charge regulator is only suitable for regulating solar modules. Never connect any other charging source to the charge regulator.
- Always connect the battery first, then the solar panel, and finally the load. The reverse order applies when uninstalling. An improper connection sequence can damage the controller.
3. Product Features
- Built-in industrial micro-controller for stable operation.
- LED display with auto memory function.
- Features 4-stage PWM (Pulse Width Modulation) charge management.
- Comprehensive built-in protections: short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.
- Dual MOSFET reverse current protection ensures low heat production.
- IP67 Waterproof design for outdoor applications.
- Automatic recognition for 6V/12V battery systems.
- Battery overcharge protection.
- Battery over-discharge protection.
- Prevents reverse discharging to the solar panel during nights.
- Supports 24-hour load operation.

Image: Key features of the PowMr Mini Solar Charge Controller.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | PowMr |
| Model Number | Pow Mini Controller |
| Application | Charger Controller, Voltage Controller, Lighting Controller, Solar System Controller, Solar Working Station |
| Maximum Current | 5A/10A (depending on model) |
| Certification | CE |
| Battery Voltage | 6V/12V Auto |
| Charge/Discharge Current | 5A or 10A (depending on model) |
| Max Solar Input Voltage | 22V |
| Voltage of Open Light | Solar Panel 8V (delay 10s) |
| Voltage of Close Light | Solar Panel 8V (delay 60s) |
| Waterproof Rating | IP67 |
| Float Voltage (12V system) | 13.8V |
| Charge Reconnect (12V system) | 13V |
| Discharge Stop (12V system) | 11.2V |
| Discharge Reconnect (12V system) | 12.6V |
| Self-consume | <10mA |
| Operating Temperature | -35 ~ +60 °C |
| Dimensions (L x W x H) | 60x25x18mm |
| Weight | 50g |
5. System Connection & Setup
Follow these steps carefully to connect your solar charge controller:
- Connect the Battery: First, connect the battery to the charge regulator, ensuring correct polarity (plus to plus, minus to minus). The controller will automatically detect and adapt to the battery type (6V or 12V).
- Connect the Solar Panel: Next, connect the photovoltaic (solar) module to the regulator, again observing correct polarity.
- Connect the Load: Finally, connect your DC loads (consumers) to the charge regulator, maintaining correct polarity.
Important: The reverse order applies when uninstalling (disconnect load, then solar panel, then battery). An improper connection sequence can damage the controller!

Image: Detailed wiring diagram for the solar charge controller.

Image: Identification of connection points on the solar charge controller.
6. Operating Modes
The controller supports several load operating modes, which are pre-set at the factory. For specific details or to inquire about custom settings, please contact your distributor.
| Mode | Description |
|---|---|
| Charge only | Only uses the charge function of the controller. The load output remains permanently closed. |
| Light-open + delay | Load turns on after sunset and remains on for a duration of 1 to 13 hours. |
| D2D (Dusk to Dawn) | Load turns on after sunset and remains on until dawn (includes a delay). |
| System | Load always outputs power, unless the battery voltage is critically low. |
| Debug | Load turns on after sunset and remains on until dawn (no delay). |
7. Troubleshooting
Refer to the table below for common issues and their solutions:
| Situation | Probable Cause | Solution |
|---|---|---|
| Charge LED not on when sunny | Solar panel opened circuit | Reconnect solar panel |
| Load LED off | Mode setting is incorrect | Set the operating mode again |
| Load LED off | Battery voltage is low | Recharge the battery |
| Load LED slow flashing | Overload on the system | Reduce the load wattage |
| Load LED slow flashing | Short circuit protection activated | Allow for auto reconnection |
| Power off | Battery too low or reverse connection | Check battery level and connection polarity |
8. User Tips
- For optimal performance, ensure your battery is adequately charged before connecting the solar controller for the first time.
- To minimize energy loss, use the shortest possible battery cables.
- This controller is specifically designed for lead-acid batteries (OPEN, AGM, GEL). Using it with other battery types like NiMH or Li-ion may cause damage or malfunction.
- Avoid connecting any other charging sources (e.g., AC chargers, generators) directly to the charge regulator simultaneously with the solar panel.
- The controller is versatile and suitable for various applications including solar power systems, charge control, voltage regulation, and lighting management.
9. Package Contents
- 1x PowMr Mini Solar Charge Controller (5A or 10A model, as purchased)
- 1x User Manual
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your vendor directly. Keep your proof of purchase for any warranty claims.