Introduction
This manual provides comprehensive instructions for the XIMA HD 1080P Car DVR Camera. Please read this manual carefully before installation and use to ensure proper operation and to take full advantage of its features. This device is designed to record high-definition video, offering features like night vision, G-sensor for emergency recording, loop-cycle recording, and ADAS for enhanced driving safety.
1. Safety Information
- Ensure the device is installed securely and does not obstruct the driver's view.
- Do not attempt to disassemble or modify the device.
- Use only specified power cables and accessories.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- No built-in lithium battery, avoiding overheating or explosion risks.
2. Product Overview
The XIMA Car DVR Camera is a high-definition video recorder designed for vehicle use. It features a compact, hidden-type design for unobtrusive installation.

Key features include:
- Ultra HD 1920x1080 Resolution: Captures clear and detailed footage.
- Night Vision: Enhanced recording in low-light conditions.
- G-Sensor: Automatically detects sudden shakes or collisions and locks the footage to prevent overwriting.
- ADAS (Advanced Driver-Assistance Systems): Provides alerts for potential road hazards.
- Loop-Cycle Recording: Continuously records, overwriting the oldest footage when the memory card is full.
- Wi-Fi Function: Allows real-time preview, video download, and settings adjustment via a mobile app.
- USB Connectivity: For power and data transfer.
- Support for up to 128GB SD Card: Ample storage for recordings.
3. Setup and Installation
3.1 Before Installation
Before permanent installation, it is recommended to test the device. Due to potential impacts during transit, testing ensures the product functions correctly upon arrival.
3.2 Rear Interface Description (Power Plug)
The device connects to your car's power system via a dedicated power plug. Proper wiring is crucial for functionality and to prevent damage. A detailed wiring diagram is typically provided in the physical manual, showing connections for constant power (Yellow), ignition switch (Red), ground (Black), illumination (Orange), reversing camera control (Pink), steering wheel controls (Brown, Orange/black striped), and auto antenna power (Blue), along with speaker wires (White, Gray, Green, Purple, and their striped counterparts).
Note: When both the Yellow (B+) and Red (ACC) lines receive +12V power simultaneously, the unit will power on normally. The Yellow (B+) line maintains power for memory functions. Each speaker cable must not be grounded or shared with other lines to avoid sound distortion or device damage.
3.3 CANBUS Connection
CANBUS connection is used for integration with the car's system, especially for high-end models. Ensure correct connection to avoid issues with the car radio shutting down.
For high-end models, you may need to disconnect existing CANBUS connections and then connect the device's CANBUS. For low-end models, you connect directly.
Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.


3.4 Reversing Camera Installation
To install the reversing camera, a detailed wiring diagram is typically provided in the physical manual. The general steps involve:
- Locate the reverse control line (pink wire) on the unit's power line and connect it to a +12V positive pole. This will cause the screen to turn blue when reversing.
- Find the CAM video input interface at the back of the unit.
- Connect the reversing camera:
- The camera typically has two sockets. Connect the red socket to the power cable.
- Insert the yellow plug into the video cable.
- Screw the red wire of the power cable and the wire of the video cable together to the positive pole of the reverse lamp.
- The black wire of the power cable is not used.
- Connect the other end of the video cable to the CAM video input interface on the back of the unit.
- The red line coming out of the video line connects to the reverse control line of the power line.
Important: If the reversing camera is not installed, do not connect the REVERSE/BACK cable. Leave it unconnected to prevent incorrect display or automatic entry into reverse mode, which can cause device malfunction.
4. Operating Instructions
4.1 Learning Steering Wheel Controls
To configure steering wheel controls, a diagram is usually provided in the physical manual. The process involves:
- Press and hold a button on your car's original steering wheel.
- On the device's interface, find the corresponding button icon.
- Click the icon to change its color, indicating successful learning.
4.2 App Connectivity (TimaCam, Apple CarPlay, Android Auto)
The device supports mobile app connectivity for various functions.
TimaCam App (for Wi-Fi models)
The TimaCam app allows real-time preview, video download, and access to settings and firmware updates. It supports both iOS and Android systems.
- Download TimaCam: Search "TimaCam" on AppStore (iOS) or Google Play (Android).
- Connect via Wi-Fi:
- Press [Recorder] on the app.
- Choose a Wi-Fi hotspot and press [CONNECT].
- The live video screen of the tachograph can then be viewed.

Apple CarPlay (Some models support)
This feature allows seamless integration with your iPhone for navigation, music, and more.
- Wired Connection: Connect your iPhone via USB data cable. The CarPlay interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your iPhone, then connect to the device's Bluetooth. CarPlay will launch automatically. (Note: Signal is transmitted via Wi-Fi; Bluetooth can be turned off after connection. CarPlay disconnects if Wi-Fi is off).
Android Auto (Some models support)
This feature integrates your Android phone for navigation, apps, and more. Google Play services must be available locally.
- Requirements: Android 6.0 or higher, valid data cable, and "Android Auto" app installed from Google Play.
- Wired Connection: Connect your Android phone via USB data cable. Android Auto interface will launch automatically.
- Wireless Connection: Enable Bluetooth and Wi-Fi on your Android phone, then connect to the device's Bluetooth. Android Auto will launch automatically. (Note: Signal is transmitted via Wi-Fi; Bluetooth can be turned off after connection. Android Auto disconnects if Wi-Fi is off).
4.3 Advanced Driver-Assistance Systems (ADAS)
The ADAS feature provides alerts to help prevent accidents, such as lane departure warnings.

4.4 G-Sensor and Emergency Recording
The built-in G-sensor detects sudden movements or impacts. In case of a collision, it automatically records and locks the footage into a separate event folder, preventing it from being overwritten by loop recording. This ensures critical evidence is preserved.

4.5 Video Playback
View recorded videos directly on the car's media player or download them to your mobile device via the TimaCam app.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Firmware Updates: Check the TimaCam app regularly for available firmware updates to ensure optimal performance and access to new features.
- Memory Card: Periodically format the SD card (e.g., once a month) to maintain optimal recording performance and prevent data corruption. Use a Class 10 or higher speed SD card.
- Environmental Conditions: Avoid exposing the device to extreme heat, cold, or humidity.
6. Troubleshooting
6.1 Cannot Boot Normally
- Wiring Check: Ensure the "Yellow" (constant +12V), "Red" (ignition switch), and "Black" (ground) wires are correctly connected. Incorrect or incomplete connections will prevent the unit from booting.
- Original Car Wiring: If using original car wiring, ensure it matches the unit's color coding. Mismatched wiring can cause damage.
- Direct Plug-in: Do not plug the original car plug directly into the new unit without verifying compatibility, as this can cause damage.
- Fuse Check: If the 3 wires are correctly connected but the unit doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the key, and press the power button to test.
- Repeated Fuse Burning: If the fuse burns repeatedly, it indicates a short circuit in the unit's protection circuit. Seek professional repair.
- Final Test: If all checks fail, connect the yellow and red wires directly to a 12V battery's positive terminal and the black wire to the negative terminal. If it boots, the issue is with the car's wiring. If not, the unit is faulty.
6.2 Automatic Shut-down
- Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it may cause automatic shutdown. Correct the wiring.
- Unstable Voltage: Test the power supply with a stable 12V-5A source. If the unit still shuts down, the power supply is faulty. If it doesn't, the unit itself has a problem.
6.3 Noise Issues
- Speaker Power: If the original speaker power is too low, increasing the volume will cause noise. Avoid excessively high volume.
- Grounded Speaker Cable: If a speaker cable is grounded, connect it directly to the unit's speaker cable.
6.4 Remote Control Cannot Be Used
- Test Method: Use a mobile phone camera to view the remote control's infrared light while pressing buttons. If no light is visible, replace the battery. If light is visible, the remote control is functional.
6.5 Settings Not Saved (No Memory)
- The yellow and red lines are connected together (should be separate: yellow to positive, red to key control).
- Yellow and red wires are reversed (swap their positions).
6.6 Bluetooth Not Working
Turn on the unit, search for its Bluetooth name on your mobile phone, and click "Connect." After connecting, you should be able to make calls and play music via Bluetooth.
6.7 Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit is burned. Contact support for service.
6.8 Sound Cannot Be Adjusted
- Reset the unit or unplug and replug the power cord.
- If the volume knob is broken, it needs to be replaced.
6.9 Reversing Camera Does Not Display
- Wiring: Check for incorrect or missing wiring. Refer to section 3.4 for correct connection.
- Camera Fault: If the camera's indicator light (if present) does not illuminate when properly wired, the camera may be faulty and needs replacement.
6.10 USB Devices Cannot Be Played
Format the USB flash disk to FAT32. Re-download content and try again. If the issue persists, replace the USB flash drive.
6.11 FM Does Not Receive Radio Station
- Antenna Connection: Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is broken.
- Station Search: Use the "AS" button for automatic search or manually search using the "before" or "after" buttons.
- Antenna Fault: If the above steps don't resolve the issue, unplug the antenna plug and try inserting a screwdriver or metal strip in its place to test for reception.
6.12 No Sound After Installation or After a While
- Initial Check: Verify that speaker cables are not short-circuited or improperly connected. Reconnect if necessary.
- Speaker Configuration: Ensure the number of speaker cables matches your car's original wiring (e.g., 2 speakers need 4 cables). If not, re-route the car's original line.
- Advanced Test: Disconnect all speaker cables from the unit. Connect an external speaker to the gray and purple (or any other pair) tail lines. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is faulty.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIMA |
| Item Type | Car DVR |
| Assembly Mode | Hidden Type |
| Camera Resolution | 1920x1080 |
| Pixels | 1800Mega |
| View Angle | 170° |
| Frames Per Second | 60 |
| Imaging Sensor | 1/3" Sony CCD |
| Video Code | H.264 |
| Video Format | MOV, MPEG-4, MP4 |
| Max External Memory | 128G |
| Memory Card Required Reading Speed | Class 10 |
| Special Features | G-Sensor, Motion Detection, Radar Detector, Anti Surge Voltage Impact, Waterproof, Anti Fog, Real Time Surveillance, Wi-Fi Function |
| GPS logger | Internal |
| Power Source | Corded Electric |
| APP Compatibility | IOS, Android |
| OSD Language | Albanian, Arabic, Armenian, Azeri, Belarusian, Bulgarian, Catalan, Chinese (Simplified), Chinese (Traditional), Croatian, Czech, Danish, Dutch, English, Estonian, Filipino, Finnish, French, Galicia, Georgian, German, Greek, Haitian Creole, Hebrew, Hindi, Hungarian, Icelandic, Indonesia, Irish, Italian, Japanese, Korean, Latin, Latvian, Lithuanian, Macedonian, Malay, Maltese, Norwegian, Persian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swahili, Swedish, Thai, Turkish, Ukrainian, Urdu India, Vietnamese, Welsh, Yiddish |
| Weight | 0.2KG |
8. User Tips
- USB Device Compatibility: If experiencing issues with USB devices, ensure the USB flash drive is formatted to FAT32.
- Power Connection: For optimal performance, ensure the device receives consistent power. If connecting via USB, verify the power output of the USB socket is sufficient.
- SD Card: Always use a high-quality Class 10 or higher speed micro SD card for reliable recording.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact XIMA Official Store customer service.
An electronic user manual (PDF) is available for download: View User Manual (PDF)
For further assistance, you can contact customer service. QR codes for various support channels (e.g., WhatsApp, TikTok, etc.) are typically provided in the physical manual.
Tips: If the device is updated, the functions are subject to change without prior notice.