G30S Air Mouse Voice Remote Control User Manual

1. Introduction

The G30S Air Mouse is a versatile wireless remote control featuring a built-in 6-axis gyroscope, gravity acceleration sensor, and high-fidelity voice input. It combines the functionalities of a traditional remote control, a computer mouse, and a gaming motion controller, making it ideal for various Android platforms and other compatible devices.

The plug-and-play micro receiver ensures compatibility with personal computers, projectors, TV boxes, Home Theater Personal Computers (HTPC), All-in-one PCs, Smart TVs, and even OTG-enabled PADs and Phones.

Front view of the G30S Air Mouse Voice Remote Control.

2. Package Contents

• 1 x G30 Air Mouse
• 1 x Nano Receiver
• 1 x User Manual

The G30S Air Mouse and its Nano Receiver.

3. Setup

3.1 Battery Installation

1. Open the battery compartment cover on the back of the G30S Air Mouse.
2. Insert two AAA batteries (not included), ensuring correct polarity (+/-).
3. Close the battery compartment cover securely.

Back of the G30S remote showing the battery compartment and Nano Receiver slot.

3.2 Connecting the Nano Receiver

1. Locate the Nano Receiver inside the battery compartment.
2. Remove the Nano Receiver from its storage slot.
3. Plug the Nano Receiver into an available USB port on your device (PC, TV Box, Projector, etc.).
4. The device should automatically recognize the receiver, and the G30S Air Mouse will be ready for use.

The Nano Receiver being connected to a device.

3.3 Android TV Box Specific Setup

If using the G30S Air Mouse with an Android TV Box, it is recommended to install "Google Assistant" for optimal voice control functionality.

4. Operating Instructions

4.1 Air Mouse Functionality

The G30S functions as a wireless air mouse. By holding the remote and rotating your wrist, the cursor on the screen will move accordingly. This allows for intuitive navigation and control of your device from a distance.

Demonstration of the G30S Air Mouse in use with an Android TV interface.

4.2 Voice Input

The G30S features a built-in high-fidelity voice microphone for voice input. This allows you to use voice commands, such as Google Voice Search, on compatible devices. Ensure "Google Assistant" is installed on your Android TV Box for full functionality.

G30S remote highlighting voice control and app integration.

4.3 IR Learning Function (33 Keys)

The G30S supports IR learning for 33 of its buttons, allowing it to mimic functions from other infrared remote controls. The "TV" button is excluded from IR learning.

Dual Mode One-Button Switching:

• 2.4G Mode: The green indicator light is used for operation indication.
• IR Mode: The red indicator light is used for operation indication.
• Press the [TV] button to switch between 2.4G mode and infrared mode.

IR Learning Steps:

1. Press and hold the [TV] button for 3 seconds. The red indicator light will flash slowly to enter the IR learning state.
2. Point the launch tube of your original infrared remote control towards the G30S Air Mouse (distance of about 2-3 cm). Press the Power button on your infrared remote control.
3. After the G30S receives the infrared code, the red indicator light will flash fast for 3 seconds. Press any button on the G30S (except the [TV] button) to save the learned function.
4. When the functional storage is completed, the red indicator light will turn to slow flash again. You can repeat the above steps to continue learning other buttons.

Detailed diagram for 33-key IR learning functionality.

5. Maintenance

5.1 Battery Replacement

When the remote control's performance degrades or it stops responding, replace the AAA batteries with new ones. Always use fresh batteries and dispose of old batteries responsibly.

5.2 Cleaning

To clean the remote, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the device.

6. Troubleshooting

• Remote not responding: Check if the Nano Receiver is securely plugged into the USB port. Ensure the batteries are correctly installed and have sufficient charge.
• Air mouse cursor erratic or unresponsive: Re-calibrate the gyroscope by placing the remote on a flat surface for a few seconds.
• Voice input not working: Verify that "Google Assistant" or a similar voice assistant application is installed and properly configured on your Android TV Box. Ensure the microphone is not obstructed.
• IR learning failure: Make sure the original IR remote is within 2-3 cm of the G30S during the learning process. Ensure the original remote's battery is not low. Repeat the learning steps carefully.
• Compatibility with Smart TV: Some Smart TVs may block third-party USB dongles. Confirm that your Smart TV supports external USB dongles and remote controls other than its original one.

7. Specifications

G30S dimensions and technical specifications table.

8. User Tips

• For optimal performance, ensure a clear line of sight between the remote and the device for IR functions.
• When the remote is in standby mode, pressing a button like '5' will first wake up the device, and then you will need to press '5' again to send the command.
• The ergonomic design of the air mouse is intended to replace traditional computer mice and infrared remotes, offering comfortable control from a distance.

9. Warranty and Support

For warranty information and technical support, please refer to the seller or manufacturer's official documentation. If you encounter any issues not covered in this manual, please contact the seller for assistance.

10. Product Video