Himist AL-21EYE

Contents

YSH 21 Eyes RGB Party DJ Disco Beam Patterns Stage Laser Light Projector Instruction Manual

Model: AL-21EYE

1. Introduction

The Himist AL-21EYE Party Light is a versatile stage laser light projector designed to create dynamic and engaging lighting effects for various occasions. This device combines red, green, and blue laser sources with RGBWUV LED strobe effects, offering a wide range of patterns and colors. It features multiple control modes including Sound Active, AUTO, DMX512, and Infrared Remote Control, making it suitable for mobile DJs, clubs, bars, KTVs, and private parties.

2. Safety Information

WARNING: This product contains Class 3A lasers. Avoid direct eye exposure to the laser beam. Misuse may result in eye injury.

  • Always operate the device in a well-ventilated area.
  • Ensure the power supply matches the device's requirements (AC 110-240V@50/60Hz).
  • Keep the device away from water, moisture, and excessive heat.
  • Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Ensure the device is securely mounted or placed on a stable surface to prevent accidental falls.
  • Operating temperature range: 10-40°C (Indoor use only).

3. Package Contents

Please check the box to ensure all items are present and in good condition:

  • 1 x YSH 21 Eyes Laser Lighting Unit
  • 1 x Power Line (appropriate plug type for your region)
  • 1 x Instruction Manual
  • 1 x Infrared Remote Control
Package contents including laser light, power cable, remote, and manual

Image: Contents of the product package.

4. Product Overview

4.1 Front Panel

Front view of the YSH 21 Eyes laser light projector

Image: Front view of the device, showing RGBW LEDs, 'Party lights' text, and laser apertures.

The front panel features multiple RGBW LED lights, the main laser apertures, and indicators for various functions.

4.2 Rear Panel

Rear view of the YSH 21 Eyes laser light projector with control panel and DMX ports

Image: Rear view of the device, highlighting the control panel, DMX IN/OUT, and power input.

The rear panel includes the control panel with a 4-digit LED display, MENU, UP, DOWN, and ENTER buttons, a microphone for sound activation, DMX IN/OUT ports (3-pin XLR), and the AC power input.

4.3 Dimensions

Dimensions of the YSH 21 Eyes laser light projector: 20cm length, 10cm width, 7.5cm height

Image: Device dimensions are approximately 20cm (length) x 10cm (width) x 7.5cm (height).

5. Setup

  1. Unpacking: Carefully remove the laser light from its packaging.
  2. Placement: Position the projector on a stable, flat surface or mount it securely using the integrated handle. Ensure there is adequate ventilation around the unit.
  3. Power Connection: Connect the provided power line to the AC input on the rear of the device. Plug the other end into a suitable power outlet (AC 110-240V, 50/60Hz).
  4. Plug Type: Ensure you have the correct plug type for your region (e.g., US Plug, EU Plug).
    Image showing different plug types: EU, US, UK, AU

    Image: Various international plug types for power connection.

  5. Initial Power On: Once connected, the device will power on.

6. Operating Modes

The YSH 21 Eyes Laser Light Projector offers several operating modes, which can be selected via the rear control panel or the infrared remote control.

6.1 Sound Active Mode

In Sound Active mode, the light effects will change and synchronize with the rhythm of music or ambient sound detected by the built-in microphone. This mode is ideal for parties and events where music is present.

6.2 AUTO Mode

In AUTO mode, the projector cycles through its pre-programmed patterns and effects automatically. This provides a continuous light show without external input.

6.3 DMX Mode

For professional control, connect the device to a DMX controller using 3-pin XLR cables via the DMX IN/OUT ports. This allows for precise control over individual light parameters, patterns, and colors.

6.4 Remote Control

The included infrared remote control provides convenient wireless access to switch between modes, adjust settings, and control various light functions.

6.5 Manual Control

Use the MENU, UP, DOWN, and ENTER buttons on the rear control panel to navigate through settings and select operating modes directly on the device.

Video: Demonstration of the laser light's various effects, including sound control, automatic memory function, and wide irradiation range. (Note: Effects are shown under smoke for visibility).

7. Maintenance

  • Cleaning: Regularly clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Lens Cleaning: Gently clean the laser apertures and LED lenses with a soft, lint-free cloth to maintain optimal light output.
  • Storage: When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Ventilation: Ensure the ventilation openings are free from dust and debris to prevent overheating.

8. Troubleshooting

  • No Power: Check the power cable connection and ensure the power outlet is functioning.
  • No Light Output: Verify the operating mode. If in DMX mode, ensure the DMX controller is sending appropriate signals.
  • No Sound Reaction: Ensure the device is in Sound Active mode and that the microphone is not obstructed. Increase the music volume if necessary.
  • Remote Control Not Working: Check the battery in the remote control. Ensure there is no obstruction between the remote and the device's IR receiver.

9. Specifications

FeatureSpecification
Brand NameHimist
Model NumberAL-21EYE
Item TypeStage Lighting Effect
OccasionProfessional Stage & DJ
Shell MaterialAluminium Alloy
LED Background LightRGBW
Mains InputAC 110-240V@50/60Hz
Voltage90-240V
Total Power15W
Power (W)15 W
Projection DistanceUp to 50M
Play ModeSound Active, AUTO
Control ModeDMX, Remote, Manual Control
Laser SourceRed-650nm@200mW / Green-532nm@50mW/ Blue-450nm@150nm
Laser ClassificationClass 3A
Condition Temperature10-40°C
DMX Connections3 pins XLR Male/Female
Work EnvironmentIndoor 0-40°C
Installation MethodSelf-contained
CertificationCE

10. User Tips

  • For the best visual effects, operate the laser light in a dark environment, ideally with the use of a fog machine to make the beams visible.
  • Experiment with different placement heights and angles to achieve varied and expansive light patterns.
  • Utilize the sound-activated mode for dynamic effects that sync with your music, enhancing the party atmosphere.

11. Warranty & Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 Himist. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.