SMART SENSOR ST8904

Contents

SMART SENSOR ST8904 4-in-1 Gas Monitor User Manual

Model: ST8904 | Brand: SMART SENSOR

1. Introduction

The SMART SENSOR ST8904 is a professional, portable 4-in-1 gas detector designed for continuous monitoring of Carbon Monoxide (CO), Hydrogen Sulfide (H₂S), Oxygen (O₂), and Combustible Gas (LEL) concentrations in the surrounding environment. This device provides accurate measurements and features sound, vibration, and flash alarms to alert users when gas concentrations reach dangerous levels. Its compact size and robust design make it suitable for various industrial applications.

2. Product Overview

2.1 Key Features

  • Detects 4 types of gas: CO, H₂S, O₂, and LEL.
  • Continuous monitoring with professional and accurate measurement.
  • Sound, vibration, and flash triple alarms.
  • Large HD LCD display with backlight for easy reading.
  • Battery charging function.
  • Low/high concentration alarm setting.
  • Option to connect to a sampling pump for closed environments.

2.2 Components

Familiarize yourself with the main components of your ST8904 Gas Monitor:

Diagram of ST8904 Gas Monitor with labeled components
Figure 1: ST8904 Gas Monitor Components
  • Alarm Light: Visual indicator for alarms.
  • LCD Display Panel: Shows gas concentrations, battery status, and other information.
  • Alarm Sound: Emits audible alerts.
  • Confirm Key: Used to confirm selections or settings.
  • Power ON/OFF Key: Controls device power.
  • Up Key: Navigates menus or increases values.
  • Down Key: Navigates menus or decreases values.
  • Gas Pump Contact: Ports for connecting an external sampling pump.
  • Gas Sensor Windows: Areas where gas sensors are located.

2.3 Applications

The ST8904 Gas Monitor is suitable for a wide range of industrial environments where gas detection is critical:

Diagram showing various industrial applications for the gas detector
Figure 2: Industrial Applications
  • Gas pipeline inspection
  • Oil exploitation sites
  • Tunnel construction
  • Metallurgical industry
  • Ship transportation
  • Mining operations
  • Chemical plants
  • Coal industry
  • Paper mills
  • Fire safety
  • Municipal services
  • Textile industry

3. Specifications

ParameterDetail
Brand NameSMART SENSOR
Model NumberST8904 Gas tester
Gas TypeMultifunctional (CO, H₂S, O₂, LEL)
Sensor TypeElectrochemical Principle
Display TypeSegment type LCD with backlight
Measurement Range (CO)0~999 ppm
Resolution (CO)1 ppm
Measurement Range (H₂S)0~500 ppm
Resolution (H₂S)1 ppm
Measurement Range (O₂)0~30 %VOL
Resolution (O₂)0.1 %VOL
Measurement Range (LEL)0~100 %LEL
Resolution (LEL)1 %LEL
Alarm AlertSound, Vibration, Flash triple alarms
Power Supply3.7V Rechargeable BL-9C Lithium-ion Battery (Built-in)
Charging PortMicro USB DC 5V
Battery Working Runtime6 hours (no alarm)
Operation Current230mA
Operation Humidity15%~95%RH
Operation Temperature-10℃~50℃
Storage Temperature0~40℃
Item Size140 * 75 * 35mm / 5.51 * 2.95 * 1.37in
Item Weight270g / 9.52oz

4. Setup

4.1 Package Contents

Before use, verify that all items are present in the package:

Contents of the ST8904 Gas Monitor package
Figure 3: Package Contents
  • 1 x ST8904 4-in-1 Gas Detector
  • 1 x USB Cable
  • 2 x Screws
  • 1 x Gas Calibration Hood
  • 1 x Storage Bag
  • 1 x User Manual (English)

4.2 Charging the Device

The ST8904 Gas Monitor comes with a built-in rechargeable BL-9C Lithium-ion battery. Before initial use, ensure the device is fully charged.

Image showing the power supply details of the gas monitor
Figure 4: Power Supply Details
  1. Connect the provided USB cable to the Micro USB DC 5V charging port on the device.
  2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
  3. The battery indicator on the LCD display will show charging status. Charge until the battery icon indicates a full charge.

4.3 Initial Power On

  1. Press and hold the Power ON/OFF Key until the LCD display illuminates.
  2. The device will perform a self-test and warm-up sequence. Wait for the device to stabilize and display gas readings.

5. Operating Instructions

5.1 Basic Operation

  1. Power On: Press and hold the Power ON/OFF Key.
  2. Power Off: Press and hold the Power ON/OFF Key until the device powers down.
  3. Monitoring: Once powered on and stabilized, the device continuously displays the real-time concentrations of CO, H₂S, O₂, and LEL on the LCD panel.

5.2 Alarm Function

The ST8904 features triple alarms (sound, vibration, and flash) that activate when gas concentrations exceed pre-set levels.

Gas monitor illustrating alarm function with sound, vibration, and flash
Figure 5: Alarm Indication
  1. Alarm Trigger: If any of the monitored gas concentrations (CO, H₂S, O₂, LEL) reach or exceed their configured alarm thresholds, the device will activate all three alarm types simultaneously.
  2. Alarm Acknowledgment: Refer to the full user manual for specific instructions on how to acknowledge or silence alarms, and how to clear alarm conditions.
  3. Alarm Value Setting: The upper and lower limit alarm values can be customized. Additionally, Time-Weighted Average (TWA) and Short Term Exposure Limit (STEL) alarm values can be set. Consult the detailed manual for programming these settings using the Up, Down, and Confirm keys.

5.3 Connecting a Sampling Pump

For monitoring in confined spaces or areas difficult to access, an external sampling pump (not included) can be connected to the Gas Pump Contact ports on the device. This allows for remote sampling of air.

  1. Ensure the device is powered off before connecting the pump.
  2. Connect the sampling pump's inlet to the desired sampling area and its outlet to the Gas Pump Contact ports on the ST8904.
  3. Power on the ST8904 and the sampling pump according to their respective instructions.

6. Maintenance

6.1 Cleaning

  • Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure the gas sensor windows are kept clean and free from obstructions.

6.2 Calibration

Regular calibration is crucial for maintaining the accuracy of your gas detector. Use the provided Gas Calibration Hood for this process.

  1. Refer to the detailed user manual for specific calibration procedures, including required calibration gases and steps.
  2. Perform calibration in a clean, fresh air environment or as recommended by the manufacturer.

6.3 Battery Care

  • Recharge the device when the battery indicator shows low power.
  • Avoid fully discharging the battery frequently to prolong its lifespan.
  • If storing the device for an extended period, charge it to approximately 50% and recharge every few months.

6.4 Storage

Store the ST8904 Gas Monitor in a dry environment within the recommended storage temperature range of 0~40℃ (32~104℉) when not in use.

7. Troubleshooting

  • Device does not power on: Ensure the battery is fully charged. If the issue persists, contact support.
  • No gas readings: Check if the sensor windows are clean and unobstructed. Ensure the device has completed its warm-up cycle.
  • False alarms: Ensure the device is operating in a clean environment for baseline readings. Check alarm threshold settings.
  • Inaccurate readings: The device may require calibration. Refer to the calibration section or contact support.
  • Display issues: If the LCD is not functioning correctly, try restarting the device. If the problem continues, contact support.

8. User Tips

  • Always perform a quick functional check before each use to ensure the device is operating correctly.
  • Keep the device away from strong electromagnetic fields, which can interfere with sensor readings.
  • For critical applications, consider having a backup device or regularly cross-referencing readings with other calibrated equipment.

9. Warranty and Support

For warranty information, technical support, or service inquiries regarding your SMART SENSOR ST8904 Gas Monitor, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.