1. Introduction
The FALCAM F38 V2 Shoulder Strap Quick Release Kit provides a seamless and secure solution for attaching and detaching your DSLR camera or gimbal from a shoulder strap. Designed for efficiency and stability, this kit features a robust aluminum alloy construction and is compatible with Arca standard square quick release plates, ensuring broad interoperability with your existing photography equipment.
2. Package Contents
Please check the contents of your package. The specific components may vary slightly depending on whether you purchased the F38 V2 3141 (Base only) or F38 V2 3142 (Full Kit).
For Model 3142 (Full Kit):
- F38 Shoulder Strap Quick Release Base V2 x1
- F38 Square Quick Release Shoulder Strap Plate x1
- Stainless Steel Lock Washer x1
- Nylon Lock Washer x1
For Model 3141 (Base Only):
- F38 Shoulder Strap Quick Release Base V2 x1


3. Setup Instructions
3.1 Attaching the Quick Release Base to a Shoulder Strap
- Identify the attachment points on your shoulder strap. The F38 V2 base features optimized ear holes for secure attachment.
- Thread your shoulder strap through the ear holes of the F38 V2 Quick Release Base. Ensure the base is oriented correctly for easy access.

3.2 Attaching the Quick Release Plate to Your Camera/Gimbal
- Locate the 1/4" screw on the F38 Square Quick Release Shoulder Strap Plate.
- Align the plate with the 1/4" tripod mount on your camera or gimbal.
- Securely tighten the screw. For Model 3142, the plate includes an anti-loosening screw washer for enhanced security.
- The classic square plate design allows for four-way free installation, meaning you can adjust the mounting direction without needing to identify a specific position.


4. Operating Instructions
4.1 Quick Release and Attachment
- To attach your camera/gimbal: Slide the quick release plate (attached to your camera/gimbal) into the F38 V2 Quick Release Base until it clicks into place. The redesigned locking locating pin ensures smooth self-locking.
- To detach your camera/gimbal: Press the release button or lever on the F38 V2 Quick Release Base and slide the plate out.


4.2 Anti-Touch Lock Feature
The F38 V2 base is equipped with an anti-touch lock mechanism to prevent accidental release of your camera. Always ensure this lock is engaged after attaching your camera for maximum security.

4.3 Video Demonstration
Video 1: Demonstration of the FALCAM F38 V2 Quick Release System in various configurations, including gimbal and shoulder strap use.
5. Maintenance
- Cleaning: Wipe the quick release base and plate with a soft, dry cloth to remove dust and debris. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
- Lubrication: Periodically check the sliding mechanism for smooth operation. If needed, apply a small amount of dry lubricant (e.g., silicone spray) to the moving parts, avoiding excessive application.
- Inspection: Regularly inspect the unit for any signs of wear, damage, or loose screws. Ensure the anti-loosening screw washer (if applicable) is intact.
- Storage: Store the kit in a clean, dry environment away from extreme temperatures and humidity when not in use.
6. Troubleshooting
6.1 Plate feels loose in the base
- Check Plate Attachment: Ensure the quick release plate is securely tightened to your camera/gimbal. A loose plate can cause instability.
- Verify Engagement: Make sure the quick release plate is fully inserted into the base and the self-locking mechanism has engaged with an audible click.
- Anti-Touch Lock: Confirm the anti-touch lock is fully engaged.
- Compatibility Note: Due to improvements in quick-release compatibility, there might be a slight amount of slack when using an Arca standard square quick-release plate on the V2 base. This is considered normal.
6.2 Difficulty inserting or removing the plate
- Clean Mechanism: Dust or debris might be obstructing the mechanism. Clean the sliding parts of both the base and the plate.
- Lubrication: Apply a small amount of dry lubricant to the sliding surfaces if they feel stiff.
- Release Button: Ensure the release button/lever is fully depressed when attempting to remove the plate.
7. Specifications
| Feature | Description |
|---|---|
| Brand | FALCAM |
| Model Numbers | F38 V2 3141 / 3142 |
| Material | Aluminum Alloy 6061 |
| Color | Black |
| Load-bearing Capacity | Up to 20kg |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package | Yes |
Dimensions & Weight:
| Model | Dimension | Net Weight |
|---|---|---|
| F38 V2 3142 (Full Kit) | 60 x 50.4 x 20mm | 56g |
| F38 V2 3141 (Base Only) | 66 x 50 x 14mm | 45g |

8. Compatibility
The FALCAM F38 V2 Shoulder Strap Quick Release Kit is designed for wide compatibility with various quick release plates and camera accessories. It adapts to most Arca standard square quick release plates on the market.
Compatible Quick Release Plates and Systems:
- F38 Series Quick Release Plate
- FALCAM Quick Release Camera Cage
- PD Quick Release Plate
- PGY Quick Release Plate
- XILETU Quick Release Plate
- Fotopro Quick Release Plate
- Tarion Quick Release Plate
- Spiderholster Quick Release Plate
- Manbily Quick Release Plate
- Other Arca Standard Square Quick Release Plates

9. User Tips
- Always double-check that your camera is securely locked into the quick release base before letting go.
- When attaching the quick release plate to your camera, ensure the screw is tightened firmly to prevent any rotation or wobbling.
- For optimal performance and longevity, keep the quick release mechanism clean and free of sand or grit.
10. Warranty and Support
FALCAM products are manufactured to high-quality standards. For specific warranty details and support inquiries, please refer to the official FALCAM website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.