1. Product Overview
The ENCHEN X8S-C is a versatile 5-in-1 multifunctional electric shaver designed for comprehensive men's grooming. It features a rotary shaver with 3-direction flex heads, a hair trimmer, a nose trimmer, a facial cleansing brush, and a facial massager brush. Its waterproof design allows for both wet and dry shaving, and it offers convenient Type-C rechargeable cordless operation.
Package Contents:
- Shaver Body
- Rotary Shaver Head
- Hair Trimmer Head
- Nose Trimmer Head
- Facial Cleansing Brush Head
- Facial Massager Brush Head
- 3 x Clipper Combs (for Hair Trimmer)
- Type-C Charging Cable
- User Manual
2. Setup
2.1 Charging the Shaver
Before first use, fully charge the shaver. The device features Type-C universal charging.
- Connect the Type-C charging cable to the charging port at the bottom of the shaver.
- Connect the other end of the cable to a suitable USB power adapter (not included) or a USB port.
- The charge indicator light will illuminate during charging.
- A full charge takes approximately 1 hour and provides up to 60 minutes of cordless shaving time.
2.2 Attaching and Detaching Heads
The ENCHEN X8S-C comes with multiple interchangeable heads for different grooming needs.
- To attach a head: Align the desired head with the shaver body and gently push until it clicks into place.
- To detach a head: Hold the shaver body firmly and pull the attached head upwards to remove it.
3. Operating Instructions
3.1 Power On/Off
Press the power button located on the shaver body to turn the device on or off.
3.2 Using the Rotary Shaver Head
The rotary shaver head features 3-direction flex heads and self-sharpening blades for a close and comfortable shave.
- Dry Shaving: Ensure your face is clean and dry. Move the shaver in small, circular motions against the direction of hair growth.
- Wet Shaving: Apply shaving foam or gel to your face. The shaver is 100% waterproof, allowing for use in the shower or with water. Move the shaver in small, circular motions.
3.3 Using the Hair Trimmer Head
Attach the hair trimmer head for precise trimming of beard, sideburns, or hair.
- Select and attach one of the three clipper combs (if desired) for different hair lengths.
- Move the trimmer against the direction of hair growth for an even trim.
3.4 Using the Nose Trimmer Head
Attach the nose trimmer head for safely and comfortably removing unwanted nose and ear hair.
- Gently insert the trimmer tip into your nostril or ear canal.
- Move it slowly to trim hair. Do not insert too deeply.
3.5 Using the Facial Cleansing Brush Head
Attach the facial cleansing brush head for deep cleaning of your face.
- Wet your face and apply your preferred facial cleanser to the brush head or your skin.
- Gently move the brush in circular motions across your face.
3.6 Using the Facial Massager Brush Head
Attach the facial massager brush head for a relaxing facial massage.
- Apply a small amount of facial cream or oil to your face or the brush head.
- Gently massage your face in circular motions to improve circulation and relax facial muscles.
4. Maintenance
4.1 Cleaning the Shaver
The ENCHEN X8S-C is 100% waterproof and features a magnetic cutter head for easy cleaning.
- After each use, turn off the shaver.
- Detach the used head from the shaver body.
- Rinse the head and the shaver body under running water to remove hair and debris.
- For the rotary shaver head, the magnetic cutter net can be easily removed for thorough cleaning.
- Allow all parts to air dry completely before reattaching or storing.
4.2 Blade Replacement
The shaver features automatic self-grinding blades that maintain sharpness over time. However, for optimal performance, it is recommended to replace the rotary shaver blades every 12-18 months, depending on usage. Replacement heads can be purchased separately from authorized retailers.
4.3 Storage
Store the shaver and its accessories in a cool, dry place away from direct sunlight and out of reach of children.
5. Troubleshooting
- Shaver not turning on: Ensure the shaver is fully charged. If the battery is low, connect it to the charger.
- Poor shaving performance: Clean the shaver head thoroughly. If performance does not improve, the blades may need replacement.
- Shaver making unusual noise: Ensure the shaver head is correctly attached and free from debris. If the issue persists, contact customer support.
- Charging indicator not working: Check the charging cable and power source connections.
6. Specifications
| Feature | Specification |
|---|---|
| Model | X8S-C |
| Brand | ENCHEN |
| Power Type | Rechargeable |
| Power Source | Rechargeable Battery (Li-ion) |
| Charging Type | Type-C Universal Charging |
| Charging Time | Approx. 1 hour |
| Cordless Shaving Time | Up to 60 minutes |
| Voltage | Global Universal (100-240V) |
| Waterproof Rating | 100% Waterproof (Wet & Dry Use) |
| Razor Type | ROTARY, Triple Blade |
| Functions | Floating Head, Wet Shave, Dry Shaving, Fast Charging, Hair Trimmer, Nose Trimmer, Facial Cleansing, Facial Massager |
| Motor Noise Level | ≤62db |
| Certifications | RoHs, CE, FCC |
| Package Dimensions (L x W x H) | 17 cm x 13 cm x 7 cm |
| Package Weight | 0.373 kg |
7. User Tips
- For the closest shave, ensure your skin is clean and taut.
- When using the hair trimmer, always start with a longer comb length and gradually reduce it if a shorter trim is desired.
- Regular cleaning after each use will prolong the life of the blades and maintain hygiene.
- If you notice a decrease in shaving efficiency, consider replacing the rotary shaver head. Check with authorized retailers for compatible replacement blades/heads.
8. Warranty and Support
This product is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or inquiries about replacement parts, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty service.
