1. Introduction
The SONICAKE Amp Toast is a lightweight, all-in-one mini guitar combo amplifier designed for both at-home practice and on-the-go playing. It features high-quality sound, integrated functions such as a tuner and drum machine, and versatile power options. This manual provides detailed instructions for setting up, operating, and maintaining your Amp Toast to ensure optimal performance and longevity.

Figure 1: SONICAKE Amp Toast QAM-50
2. Key Features
- 9-watt single-channel amplifier.
- Dual 2.5" stereo speakers with passive bass diaphragms.
- 6 Classic Amplifier models: Clean (x2), Overdrive (x2), Higain (x2).
- 6 Effects: Modulation (Chorus/Tremolo), Delay (Analog/Digital), Reverb (Room/Plate).
- 40 high-quality drum patterns.
- Tap tempo function for controlling drum tempo.
- Dedicated tone and gain controls.
- Sensitive built-in chromatic tuner.
- Bluetooth audio connectivity for external audio devices.
- AUX In port for connecting external audio devices.
- 1/8" (3.5mm) headphone jack for private practice.
- Multiple power options: 9V power adapter, USB bus power, or 6 AA size batteries.

Figure 2: Compact size of the Amp Toast
3. Specifications
| Attribute | Value |
|---|---|
| Input Impedance | 470kOhm |
| Speaker Size | 2 x 2.5 inches |
| Power Output | 9W RMS |
| Frequency Response Range | 40Hz-16kHz |
| Power Supply | DC 9V, 6 AA batteries, or USB 5V (supports power bank) |
| Bluetooth Version | BT 5.0 |
| Bluetooth Working Range | <10m |
| Current Consumption (DC 9V) | 120mA (static) / 900mA (max) |
| Current Consumption (USB 5V) | 180mA (static) / 2A (max) |
| Dimensions (W x D x H) | 219.4mm x 96.4mm x 124.5mm |
| Unit Weight | 948g |
4. Controls and Connections

Figure 3: Amplifier Models and Effects Controls

Figure 4: Drum Machine Controls

Figure 5: Tuner, Bluetooth, and AUX IN Indicators

Figure 6: Power Supply Options and Rear Panel
Front Panel Controls:
- INPUT Jack: 1/4" mono audio jack for connecting your guitar.
- LED Screen: Displays various information, such as tuner notes or drum pattern numbers.
- MOD Knob: Selects a Modulation type (Chorus or Tremolo).
- AMP Knob: Selects one of the 6 classic amplifier models (Clean x2, Overdrive x2, Higain x2).
- TAP Button: Tap to set the drum tempo. Hold for 2 seconds to enable the built-in tuner.
- ▸/ Button: Press to start or stop the drum machine. Press and hold to change the drum machine preset by rotating the DRUM VOL knob.
- DRUM VOL Knob: Controls the volume of the drum machine. When held with the ▸/ button, it selects drum rhythm types.
- DELAY Knob: Selects a Delay type (Analog or Digital).
- REVERB Knob: Selects a Reverb type (Room or Plate).
- POWER Switch: Toggles the Amp Toast ON/OFF.
- GAIN Knob: Controls the gain amount for your guitar signal.
- TONE Knob: Controls the overall tone of the effect.
- BT Status LED: Flashing light indicates Bluetooth is on standby and ready to pair. Solid light indicates a device is connected.
- MASTER Knob: Controls the overall speaker output volume.
Rear Panel Connections:
- DC 9V Jack: For connecting a 9-volt DC regulated power adapter (center negative, 1A recommended).
- Headphone Jack: 1/8" (3.5mm) headphone output for silent practice.
- AUX IN Jack: Connect external devices such as MP3 players for audio playback.
- USB Port: Provides power supply or for connecting to a computer to update firmware.
Amplifier Models:
| Name | Based on | Cab Sim |
|---|---|---|
| Jazz CL | Legendary Jazz Clean amp | 2x12 |
| TWD LUX | Fender Tweed Deluxe | 2x12 |
| UK 800 | Marshall JCM800 | 4x12 |
| Voxxx 30T | Vox AC30 Top Boost | 2x12 |
| PV 51 | Peavey 5150 | 4x12 |
| US RECT | Mesa/Boogie Dual Rectifier | 4x12 |
Note: The mentioned manufacturers and product names are trademarks or registered trademarks of their respective owners, used merely to identify the sound characteristics.
Drum Rhythm List:
| Display | Rhythm Type | Display | Rhythm Type | Display | Rhythm Type |
|---|---|---|---|---|---|
| 0 (1st light) | Pop 1 | 0 (2nd light) | Blues 1 | 0 (3rd light) | Metro 1/4 |
| 1 (1st light) | Pop 2 | 1 (2nd light) | Blues 2 | 1 (3rd light) | Metro 2/4 |
| 2 (1st light) | Pop 3 | 2 (2nd light) | Blues 3 | 2 (3rd light) | Metro 3/4 |
| 3 (1st light) | Pop 4 | 3 (2nd light) | Blues 4 | 3 (3rd light) | Metro 4/4 |
| 4 (1st light) | Pop 5 | 4 (2nd light) | Blues 5 | 4 (3rd light) | Metro 5/4 |
| 5 (1st light) | Metal 1 | 5 (2nd light) | Fusion 1 | 5 (3rd light) | Metro 6/4 |
| 6 (1st light) | Metal 2 | 6 (2nd light) | Fusion 2 | 6 (3rd light) | Metro 7/4 |
| 7 (1st light) | Metal 3 | 7 (2nd light) | Fusion 3 | 7 (3rd light) | Metro 6/8 |
| 8 (1st light) | Metal 4 | 8 (2nd light) | Fusion 4 | 8 (3rd light) | Metro 7/8 |
| 9 (1st light) | Metal 5 | 9 (2nd light) | Fusion 5 | 9 (3rd light) | Metro 9/8 |
5. Setup Guide
5.1 Powering the Unit
The Amp Toast offers three power options:
- 9V DC Power Adapter: Connect the included 9V DC power adapter to the 'DC 9V' jack on the rear panel and plug it into a wall outlet. Ensure the adapter is center negative.
- USB Bus Power: Connect the Amp Toast to a USB power source (e.g., computer, power bank) using the provided USB cable.
- AA Batteries: Open the battery compartment on the rear panel and insert 6 AA size batteries, ensuring correct polarity. Close the compartment securely.

Figure 7: Amp Toast in use with a guitar
5.2 Connecting Your Guitar
Plug your guitar cable into the 'INPUT' jack on the front panel of the Amp Toast.
5.3 Connecting External Audio Devices
- Bluetooth: Hold the TAP button and the ▸/ button simultaneously to activate Bluetooth. The BT Status LED will flash. On your mobile device, search for 'Sonicake Amp Toast' in your Bluetooth settings and pair. The BT LED will become solid once connected.
- AUX In: Connect an audio cable from your external device (e.g., MP3 player) to the 'AUX IN' jack on the rear panel.
5.4 Connecting Headphones
For private practice, plug your headphones into the 'Headphone' jack on the rear panel.
6. Operating Instructions
6.1 Basic Operation
- Turn on the Amp Toast using the 'POWER' switch.
- Adjust the 'MASTER' knob to a comfortable listening volume.
- Use the 'AMP' knob to select your desired amplifier model.
- Adjust 'GAIN' for the amount of drive/distortion and 'TONE' for overall tonal character.
6.2 Using Effects
- Modulation: Rotate the 'MOD' knob to select between Chorus and Tremolo effects.
- Delay: Rotate the 'DELAY' knob to select between Analog and Digital delay types.
- Reverb: Rotate the 'REVERB' knob to select between Room and Plate reverb types.
6.3 Drum Machine
- Start/Stop: Press the '▸/' button to start or stop the drum machine.
- Select Rhythm: Press and hold the '▸/' button, then rotate the 'DRUM VOL' knob to cycle through the 40 available drum patterns. The LED screen will display the pattern number.
- Set Tempo: Tap the 'TAP' button at your desired tempo. The TAP button LED will pulse to indicate the set tempo.
- Adjust Volume: Use the 'DRUM VOL' knob to adjust the volume of the drum machine.
6.4 Tuner Function
Hold the 'TAP' button for 2 seconds to activate the built-in chromatic tuner. The note name will appear on the LED screen (a dot on the bottom right indicates a sharp note). The LEDs will indicate pitch accuracy: green for in tune, red for flat, and red for sharp. When the tuner is active, the Amp Toast's output will be muted. Press any button to exit the tuner.
6.5 Bluetooth Audio Playback
Once connected (as per Section 5.3), you can play audio from your mobile device through the Amp Toast. Control the playback volume directly from your mobile device.
Video 1: SONICAKE Amp Toast Product Demo
7. Power Supply
The Amp Toast can be powered by three methods:
- 9V DC Adapter: Use a 9V DC center negative power adapter (1A recommended). This is ideal for stationary use.
- USB 5V: Connect via a standard USB cable to a USB power source. This is convenient for use with power banks or computer USB ports.
- 6 AA Batteries: For maximum portability, install 6 AA batteries. This allows for completely wireless operation.
Always ensure the correct power source is used to prevent damage to the unit.
8. Safety Precautions
Please read and follow these precautions carefully to ensure safe operation and prevent damage to the unit.
8.1 Power Supply
- Always use a DC 9V center negative AC adapter. Use of an unspecified adapter could damage the unit.
- Always connect the AC adapter to an AC outlet that supplies the rated voltage required by the adapter.
- Disconnect the AC adapter from the AC outlet during lightning storms or when not using the unit for an extended period.
- Remove batteries from the unit if it will not be used for a long time.
- If battery leakage occurs, thoroughly wipe the battery holder and terminals to remove battery fluid.
- Close the battery holder cover when using the unit.
8.2 Environment
- Avoid using the unit in extremely hot or cold places, under direct sunlight, or near heaters and other heat sources.
- Do not expose the unit to magnetic fields.
- Avoid sandy or dusty places, and areas with high humidity or splashing water.
- Do not place the unit in areas subject to excessive vibrations.
8.3 Electrical Interference
Devices that emit powerful electromagnetic waves (e.g., radios and TVs) should not be placed near this unit, as interference could occur. Operate this unit at a suitable distance from such devices.
8.4 Handling
- Do not apply excessive force to the switches and other controls.
- Do not put foreign objects or liquids into the unit.
- Clean only with a soft, dry cloth.
- Avoid strong impacts to the unit.
9. User Tips
- Tone Exploration: Experiment with the different amplifier models (AMP knob) and effects (MOD, DELAY, REVERB) to discover a wide range of tones. Each model offers unique characteristics.
- Rhythm Practice: Utilize the built-in drum machine to practice your timing and rhythm. The tap tempo feature allows you to easily match the beat to your playing.
- Silent Practice: The headphone jack is excellent for practicing without disturbing others. Remember to adjust the MASTER volume when using headphones.
- Portability: For ultimate portability, power the Amp Toast with 6 AA batteries. A power bank connected via USB also offers a convenient mobile power solution.
- External Audio: Use the Bluetooth or AUX IN features to play along with backing tracks or your favorite songs, enhancing your practice sessions.
10. Troubleshooting
- No Sound:
- Check if the unit is powered on.
- Ensure your guitar is properly connected to the 'INPUT' jack.
- Verify that the 'MASTER' volume knob is turned up.
- Check the 'GAIN' and 'TONE' knobs are not set to minimum.
- If using headphones, ensure they are fully plugged in and the headphone volume is adequate. - Bluetooth Not Connecting:
- Make sure Bluetooth is activated on the Amp Toast (flashing BT LED). If not, hold TAP and ▸/ buttons.
- Ensure Bluetooth is enabled on your mobile device.
- Try forgetting 'Sonicake Amp Toast' from your device's Bluetooth list and re-pairing. - Distorted Sound:
- Reduce the 'GAIN' knob setting.
- Lower the output volume from your guitar or external audio source. - Tuner Not Activating:
- Ensure you are holding the 'TAP' button for a full 2 seconds. A quick press will only adjust drum tempo. - Drum Machine Not Playing:
- Press the '▸/' button to start playback. - Drum Machine Volume Too Low/High:
- Adjust the 'DRUM VOL' knob.
11. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for extended periods, store the Amp Toast in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Remove batteries if storing for a long time to prevent leakage.
- Battery Replacement: Replace all 6 AA batteries simultaneously with new ones to ensure consistent performance.
For a detailed user manual, you may refer to the official PDF document available at: SONICAKE Amp Toast User Manual (PDF)
12. Warranty and Support
For information regarding warranty coverage, technical support, and service, please visit the official SONICAKE website or contact their customer service department. Keep your proof of purchase for any warranty claims.