KKMOON FJ3399C

Contents

FJ3399C Smart Weather Station with Clock

Model: FJ3399C

1. Introduction

Thank you for choosing the KKMOON FJ3399C Smart Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, weather forecasts, and functions as a clock with dual alarms. Its VA color screen and solid wood frame offer a clear display and aesthetic appeal. This manual will guide you through the setup, operation, and maintenance of your new weather station.

FJ3399C Smart Weather Station and Wireless Sensor

Figure 1: FJ3399C Smart Weather Station and Wireless Sensor

2. Package Contents

Please check the package for the following items:

  • 1 x Weather Station (Main Unit)
  • 1 x Wireless Outdoor Sensor
  • 1 x USB Power Cable (1.5m length)
  • 1 x User Manual (EN/DE/FR/IT/ES)

Note: AAA batteries for the weather station and AA batteries for the wireless sensor are not included and must be purchased separately.

Product dimensions for the weather station and sensor, USB cable length, and packaging list.

Figure 2: Package contents and dimensions

3. Product Overview

3.1 Main Unit Display

Detailed view of the weather station display with numbered components and their descriptions.

Figure 3: Weather Station Display Layout

  1. Indoor temperature and humidity
  2. Weather forecast
  3. Air pressure
  4. Remote sensor data
  5. Outdoor comfort icon
  6. Date
  7. Time
  8. Alarm icon
  9. Week
  10. Indoor comfort icon

3.2 Rear Panel Controls

Rear view of the weather station showing control buttons, power interface, and battery compartment.

Figure 4: Rear Panel of Weather Station

The rear panel includes buttons for settings (SET), channel selection (CH), alarm (ALARM), and time adjustment (+/-), along with the power interface and battery compartment.

3.3 Wireless Outdoor Sensor

Wireless outdoor sensor.

Figure 5: Wireless Outdoor Sensor

The wireless sensor transmits outdoor temperature and humidity data to the main unit using 433.92MHz RF frequency. It has its own display for current readings and a channel switch inside the battery compartment.

4. Setup Instructions

4.1 Battery Installation

  1. Main Unit: Open the battery compartment on the rear of the weather station. Insert 2 x LR03 AAA batteries (not included), ensuring correct polarity (+/-).
  2. Wireless Sensor: Open the battery compartment on the rear of the wireless sensor. Insert 2 x LR6 AA batteries (not included), ensuring correct polarity (+/-).

4.2 Powering On

Connect the provided USB power cable to the weather station's power interface (DC 5V 600MA) and plug the other end into a suitable USB power adapter (not included). The weather station will power on and the display will light up. The batteries in the main unit serve as a backup for settings during power outages, but the backlight will only illuminate for 10 seconds when running on battery power.

4.3 Sensor Pairing

Upon initial power-up, the weather station will automatically search for the wireless sensor. Ensure the sensor is within range (up to 50 meters in an open area). If the sensor does not connect automatically, press and hold the 'CH' button on the main unit to manually initiate a search.

Diagram illustrating wireless transmission technology and sensor placement.

Figure 6: Wireless Sensor Transmission

4.4 Initial Settings (Time, Date, Units)

Once the sensor is connected, you can set the time, date, and preferred units:

  1. Press the 'SET' button to enter time/date setting mode.
  2. Use the '+' and '-' buttons to adjust values.
  3. Press 'SET' again to confirm each setting and move to the next (e.g., Hour > Minute > Year > Month > Day).
  4. To switch temperature units (℃/℉) or pressure units (inHg/hPa/mb), use the dedicated buttons or follow the manual's specific instructions for unit selection.
  5. The day of the week can be displayed in 7 languages: English, German, Italian, French, Spanish, Netherlands, and Danish.

4.5 Sensor Placement

Place the wireless outdoor sensor in a location that is protected from direct sunlight and rain, but allows for good air circulation. Ensure it is within the 50-meter transmission range of the main unit.

Example placement of the wireless outdoor sensor.

Figure 7: Recommended Sensor Placement

5. Operating Instructions

5.1 Reading the Display

The VA color screen provides a clear overview of various data:

  • Indoor/Outdoor Temperature & Humidity: Displays current readings for both environments.
  • Weather Forecast: Icons indicate predicted weather conditions.
  • Air Pressure: Shows current barometric pressure.
  • Time/Date/Week: Current time, date, and day of the week.
  • Comfort Index: Indicates indoor/outdoor comfort levels.
  • Change Trend Display: Arrows may indicate rising or falling trends for temperature/humidity.
Weather forecast icons and their corresponding weather conditions (Sunny, Slightly cloudy, Cloudy, Rainy, Heavy Rainy, Snowy).

Figure 8: Weather Forecast Icons

5.2 Setting Alarms

The weather station features dual alarms and a snooze function:

  1. Press the 'ALARM' button to view Alarm 1 or Alarm 2 settings.
  2. Press and hold 'ALARM' to enter alarm setting mode.
  3. Use '+' and '-' buttons to adjust the alarm time.
  4. Press 'ALARM' again to confirm and move to the next setting.
  5. To activate/deactivate an alarm, press 'ALARM' briefly when viewing the alarm time. An alarm icon will appear/disappear on the display.
  6. Snooze Function: When an alarm sounds, press any button (except 'ALARM') to activate snooze. The snooze duration can be set from 1 to 30 minutes (or OFF).

5.3 Backlight Adjustment

When powered by the USB cable, the backlight can be continuously on. Press the 'SET' button briefly to cycle through 4 levels of brightness. When running on batteries, the backlight will only illuminate for 10 seconds after a button press.

5.4 Temperature Alerts

You can set temperature alerts for both indoor and outdoor readings. When the temperature reaches the set alarm value, the weather station will issue an audible alarm. Refer to the detailed user manual (included in the package) for specific steps on setting temperature alerts.

6. Specifications

FeatureDetail
Model NumberFJ3399C
Brand NameKKMOON
MaterialABS + Beech Wood
Display TypeDIGITAL (VA Color Screen)
Indoor Temperature Range-9.9℃ (14.2℉) ~ 50℃ (122℉)
Outdoor Temperature Range-40℃ (-40℉) ~ 70℃ (158℉)
Humidity Range20%RH ~ 95%RH
Barometric Pressure Range850-1100 mB/hPa (25.10 ~ 32.48inHg)
Wireless Transmission Frequency433.92MHz RF
Wireless Transmission RangeUp to 50 meters (open area)
Max. Wireless Sensors Supported3 (1 included)
Time Format12/24HR selectable
CalendarPerpetual Calendar up to Year 2099
Day of Week LanguagesEN, DE, IT, FR, ES, NL, DA
AlarmsDual alarms with Snooze (OFF or 1-30 min)
Power Type (Weather Station)DC 5V 600MA (USB cable included), 2 x LR03 AAA batteries (not included) for backup
Power Type (Wireless Sensor)2 x LR6 AA batteries (not included)
USB Power Cable Length1.5 meters
Display Size112 * 62 mm / 4.41 * 2.44 inch
Weather Station Size14.8 * 2.5 * 9.9 cm / 5.83 * 0.98 * 3.9 inch
Sensor Size9.7 * 4.9 * 3.2 cm / 3.82 * 1.93 * 1.26 inch
Item Weight210g / 7.41oz
CertificationCE
UseHousehold
Indoor and outdoor temperature and humidity measurement ranges.

Figure 9: Temperature Measurement Ranges

7. Maintenance

  • Cleaning: Wipe the weather station and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace batteries in both the main unit and the wireless sensor when the low battery indicator appears on the display. Ensure correct polarity.
  • Storage: If storing the device for an extended period, remove all batteries to prevent leakage.
  • Environmental Conditions: Avoid exposing the device to extreme temperatures, direct sunlight, or excessive moisture, especially the main unit.

8. Troubleshooting

ProblemPossible Solution
No display on main unitCheck USB power connection. Ensure backup batteries are correctly installed or replaced.
Outdoor sensor not connecting/displaying dataEnsure sensor batteries are fresh and correctly installed. Move sensor closer to the main unit. Press and hold 'CH' button on main unit to re-initiate sensor search. Check for obstructions between sensor and main unit.
Inaccurate temperature/humidity readingsEnsure sensor is not in direct sunlight or near heat/cold sources. Allow time for readings to stabilize after initial setup or relocation.
Alarm not soundingCheck if the alarm is activated (alarm icon visible). Verify alarm time settings.
Backlight not staying onEnsure the weather station is connected via the USB power cable. Backlight is momentary when running on backup batteries.

9. User Tips

  • For optimal outdoor temperature and humidity readings, place the wireless sensor in a shaded, well-ventilated area, away from direct precipitation and heat sources.
  • Consider using rechargeable batteries for the wireless sensor for long-term cost savings and environmental benefits.
  • If you experience intermittent connectivity with the outdoor sensor, try changing its channel (if applicable, usually a small switch inside the battery compartment) and then re-pairing with the main unit.

10. Warranty and Support

This product comes with a manufacturer's limited warranty. For detailed warranty information, please refer to the warranty card included in your package or contact the seller directly. If you encounter any issues not covered in this manual, please reach out to customer support for assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.