Introduction
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your XGEDA replacement power board. This power board is designed as a compatible replacement part for specific LG 42-inch television models. Please read this manual thoroughly before attempting any installation or repair to ensure proper function and safety.

Setup and Compatibility
Critical Compatibility Check: Before purchasing or installing this power board, it is imperative to verify that both the board model number and your television's machine model number match the specifications. Incorrect matching can lead to malfunction or damage. The board model number is typically printed directly on the PCB (Printed Circuit Board).

Identifying Your TV's Components and Model: To ensure correct identification, please refer to the diagram below. This illustrates the location of key components within your TV and where to find the TV model number on the back panel.

Installation:
- Safety First: Always disconnect the television from the main power supply before opening the back panel or performing any internal work.
- Access: Carefully remove the back panel of your television to access the internal components.
- Locate the Old Board: Identify the existing power board. It will typically be connected to the main power input and distribute power to other components.
- Disconnect: Gently disconnect all cables and connectors attached to the old power board. Note their positions for reassembly.
- Remove Old Board: Unscrew and remove the old power board from the TV chassis.
- Install New Board: Place the new XGEDA power board into position and secure it with screws.
- Reconnect: Reconnect all cables and connectors to the new power board, ensuring they are firmly seated.
- Reassemble: Carefully reattach the TV's back panel.
- Test: Reconnect the TV to the main power supply and test its functionality.
Professional Installation Recommended: Due to the sensitive nature of electronic components and the potential for electric shock, installation should ideally be performed by a qualified technician.
Operating Instructions
The power board is an internal component responsible for supplying power to your television. It does not have user-operable controls. Once correctly installed, the board functions automatically when the television is powered on, providing the necessary voltage and current to all other TV circuits.
Maintenance
This power board is designed to be maintenance-free under normal operating conditions. To ensure its longevity and optimal performance:
- Keep Dry: Avoid exposing the television to moisture or high humidity, which can damage internal electronic components.
- Cleanliness: Periodically, and with the TV unplugged, you may gently clean the TV's ventilation openings to prevent dust buildup, which can lead to overheating. Do not attempt to clean the internal board directly unless you are a qualified technician.
- Ventilation: Ensure the television has adequate ventilation and is not placed in an enclosed space that could restrict airflow.
- Avoid Static: When handling the board, always use anti-static precautions (e.g., anti-static wrist strap) to prevent damage from electrostatic discharge.
Troubleshooting
If your television experiences issues after installing the new power board, consider the following:
- No Power / Intermittent Power:
- Double-check all cable connections to ensure they are secure and correctly seated.
- Verify that the TV's power cord is fully plugged into both the TV and a working wall outlet.
- Confirm that the TV's power button or remote control is functioning correctly.
- Incorrect Board Model: Re-verify that the installed power board's model number precisely matches your original board and TV model. An incompatible board will not function correctly.
- Shipping Damage: All products undergo rigorous testing before shipping. If you suspect the product was damaged during transit, please inspect it immediately upon receipt and contact the seller with details and photographic evidence.
- Other Issues: If the problem persists after checking the above, it may indicate an issue with another component of the TV or a fault with the power board itself. In such cases, professional diagnosis is recommended.
Specifications
| Feature | Detail |
|---|---|
| Product Type | Replacement TV Power Board (PSU) |
| Board Model Numbers | EAX64648001(1.6), EAX64437505 |
| Compatible TV Brands | LG |
| Compatible TV Models | 42LD450-CA, 42LK460, 42LD650-CC, 42CS560-ZD, 42CS460.ATS (42-inch) |
| Origin | Mainland China |
| Package Length | 34 cm |
| Package Width | 24 cm |
| Package Height | 7 cm |
| Package Weight | 0.46 kg |
User Tips
- Verify Models Carefully: Always double-check both the power board's model number and your TV's model number before purchase and installation. This is the most common reason for compatibility issues.
- Handle with Care: Electronic components are delicate. Handle the board by its edges and avoid touching the components directly to prevent damage from static electricity or physical impact.
- Document Disassembly: Take photos or make notes during the disassembly process of your old board. This will greatly assist in correctly reassembling the new board and its connections.
Warranty and Support
All products are rigorously tested by professional technicians and are confirmed to be in good condition before shipping. If you encounter any issues or have questions regarding the product:
- Contact Seller Immediately: If the product is faulty upon arrival or damaged during shipping, please inform the seller immediately after receiving it.
- Technical Assistance: For any technical questions or assistance with installation and troubleshooting, please contact the seller directly. They are equipped to help solve problems related to the product.
- Warranty Information: For specific warranty terms and conditions, please refer to the seller's policy or contact them directly for details.