Introduction
The Mornystar M6 Motorcycle Helmet Intercom Headset is designed to provide clear and reliable communication for motorcyclists. It features Bluetooth connectivity for mobile phones, rider-to-rider intercom functionality, FM radio, and advanced noise reduction technology. This manual provides detailed instructions for the proper installation, operation, and maintenance of your M6 headset.
Figure 1: Mornystar M6 Headset
Package Contents
Please verify that all items listed below are included in your package:
- M6 Plus Bluetooth Headset: 1 unit
- Mounting package: 1 set
- Detachable earpieces: 1 set (for easy installation and removal)
- Mini-USB charging cable: 1 unit
- Soft Microphone: 1 unit (recommended for integral/full face helmets)
- Hard Microphone: 1 unit (recommended for open/half face helmets)
- English User Manual: 1 unit
Figure 2: Included Components
Product Overview and Controls
Familiarize yourself with the buttons and ports on your M6 headset:
Figure 3: M6 Headset Control Layout
- Intercom Button
- Volume - / Previous Track Button
- Volume + / Next Track Button
- LED Indicator
- Function Button
- Headset / Charge Socket
Setup
1. Installation
Use the provided mounting package to securely attach the M6 headset to your helmet. Ensure the headset is positioned for easy access to controls and optimal microphone placement.
2. Microphone Selection and Installation
- Soft Microphone: Ideal for integral or full-face helmets. Position it close to your mouth inside the helmet.
- Hard Microphone: Suitable for open-face or half-face helmets. Attach it to the helmet's chin bar or a similar stable surface.
Connect the chosen microphone and speakers to the Headset / Charge Socket (6) on the M6 unit.
3. Initial Charging
Before first use, fully charge the M6 headset using the Mini-USB charging cable connected to the Headset / Charge Socket (6) and a compatible USB power source. The LED indicator (4) will show charging status.
Operating Instructions
1. Power On/Off
- Power On: Long press the Function Button (5). The LED indicator (4) will flash.
- Power Off: Long press the Function Button (5) again.
2. Pairing with a Cellphone
Figure 4: Cellphone Pairing Process
- When the device is on, long press the Function Button (5). The red and blue lights will flash alternately, indicating the headset is in pairing mode.
- On your cellphone, switch on Bluetooth and search for available devices. Select "Mornystar M6 Plus" from the list.
- Once connected, a voice message will confirm "pairing complete".
Remark:
After pairing, please ensure both "cellphone audio" and "media audio" options are selected in your phone's Bluetooth settings for proper call and music functionality.
3. Rider-to-Rider Intercom Function
Figure 5: Intercom Pairing Diagram
- With both headsets (Headset A and Headset B) powered on, long press the Function Button (5) on both devices simultaneously until the red and blue lights flash to enter pairing mode.
- Short press the Intercom Button (1) on either Headset A or Headset B. The red and blue lights will flash slowly, then the LED indicator will turn blue, indicating the device connection is completed.
- After connection is completed, you can initiate the intercom function by pressing the Intercom Button (1) on either headset.
4. Music Sharing
Figure 6: Music Sharing Setup
- Ensure Device A is connected to your cellphone via Bluetooth, and music is either playing or paused.
- Pair Device A and Device B for intercom (ensure they are not currently in an active intercom conversation).
- After successful pairing, press and hold the Intercom Button (1) and Volume + Button (3) on Device A for 2 seconds. The blue light will flash slowly, and a voice prompt "start sharing music" will confirm successful music sharing.
5. FM Radio Operation
Figure 7: FM Radio Controls
- FM Switch On/Off: Press the Intercom Button (1) for 3 seconds when the device is in standby mode (to turn on) or when FM is active (to turn off).
- Volume Up: Short press the Volume + Button (3) once.
- Volume Down: Short press the Volume - Button (2) once.
- Search Previous Station: Long press the Volume - Button (2) for 2 seconds.
- Search Next Station: Long press the Volume + Button (3) for 2 seconds.
6. Voice Command
The M6 headset supports voice command functionality. Refer to your cellphone's voice assistant instructions for activation and usage once paired.
7. GPS Audio Integration
When paired with your cellphone, GPS navigation audio will be transmitted directly to your headset, allowing for clear directional prompts while riding.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the exterior of the headset. Do not use harsh chemicals or abrasive cleaners.
- Water Resistance: The M6 headset features a waterproof design. However, avoid submerging it in water or exposing it to extreme moisture for prolonged periods.
- Charging: Always use the provided Mini-USB charging cable. Do not use damaged cables or chargers.
- Storage: Store the headset in a cool, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cannot pair with cellphone. | Headset not in pairing mode; Bluetooth off on phone; incorrect device selected. | Ensure headset is in pairing mode (red/blue flashing LED). Turn on phone's Bluetooth and select "Mornystar M6 Plus". Restart both devices if necessary. |
| No audio for calls or music after pairing. | Cellphone audio settings not configured correctly. | In your phone's Bluetooth settings for "Mornystar M6 Plus", ensure both "cellphone audio" and "media audio" are enabled. |
| Intercom connection issues. | Headsets not in pairing mode; too far apart; interference. | Ensure both headsets are in intercom pairing mode. Reduce distance between devices. Avoid areas with strong electromagnetic interference. |
| Headset turns off unexpectedly. | Low battery; firmware issue; internal malfunction. | Ensure the headset is fully charged. If the issue persists, try resetting the device (if a reset procedure is available, otherwise contact support). |
| Poor audio quality / Noise. | Microphone placement; environmental noise; volume settings. | Adjust microphone position. Ensure CVC/DSP noise reduction is active. Adjust volume levels. |
Specifications
Figure 8: Key Features and Specifications
| Feature | Detail |
|---|---|
| Model | M6 Plus |
| Item Type | Helmet Headset |
| Connection Mode | Bluetooth |
| Bluetooth Version | 5.3 |
| Bluetooth Communication Distance | 10 meters (between headset and phone) |
| Maximum Intercom Distance | 1000 meters (rider to rider) |
| Maximum Number of Speakers | 2 (for intercom) |
| Battery Capacity | 800mAH (Built-in Battery) |
| Working Time | Approximately 8-10 hours (active use), up to 20 hours (standby/light use) |
| Charging Port | Mini-USB |
| Speed Interference | No transmission interference up to 80-100km/h |
| Special Features | FM Radio, Voice Control, Waterproof, Noise Reduction (CVC & DSP), Music Sharing, GPS Audio Integration, Online Update |
| Applicable Helmet Type | Half Helmet, MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet, Universal |
| Item Weight | 0.3kg |
| Certifications | CCC, CE, RoHS, FCC |
| Origin | Mainland China |
User Tips
- For optimal audio quality and functionality with your smartphone, always double-check your phone's Bluetooth settings to ensure both "cellphone audio" and "media audio" profiles are enabled for the M6 headset.
- When using the intercom, ensure both units are fully charged to maintain a stable connection throughout your ride.
- Experiment with microphone placement within your helmet to find the best balance between clear voice transmission and minimal wind noise.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your proof of purchase for any warranty claims.
The product is certified with CE, RoHS, and FCC standards, ensuring compliance with relevant safety and environmental regulations.
