QIACHIP KR2204-4

Contents

QIACHIP KR2204-4 4-Channel Wireless Remote Control Relay Module

User Manual

1. Introduction

This manual provides detailed instructions for the QIACHIP KR2204-4 4-Channel Wireless Remote Control Relay Module. This versatile device allows for wireless control of various AC-powered appliances such as lights, garage doors, gate motors, and other electrical switches using a 433MHz RF remote control. Please read this manual thoroughly before installation and operation to ensure proper and safe use.

QIACHIP KR2204-4 Relay Module with two remote controls
QIACHIP KR2204-4 Relay Module and Remote Controls

2. Product Overview

The QIACHIP KR2204-4 is a 4-channel relay module designed for remote control applications. It operates on an AC 90V-250V power supply and uses 433MHz RF wireless communication for reliable signal transmission. The module supports multiple operating modes, including Momentary, Toggle, and Latched, allowing for flexible control of connected devices.

Examples of applications for the remote control switch, including bulbs, fans, AC/DC motors, and smart home scenarios.
Typical Applications for the Relay Module
Video demonstration of the relay module controlling multiple light bulbs.

3. Specifications

FeatureSpecification
Model NumberKR2204-4
Brand NameQIACHIP
Input Power / Working VoltageAC 90V-250V 50/60HZ
RF Frequency433.92MHz
Wireless CommunicationRF (ASK Superheterodyne Reception)
Channel4
Quiescent Current5mA
Matching ModeIntelligent Learning Code (Learning button)
Receiver Sensitivity>104dbm
Remote Control Range>70m (Free Space)
Operation ModesMomentary, Toggle, Latched, and various 2-way combinations
Output ModeDry Contact/Voltage Output (NO, NC, COM)
Wired Connection WayFixed Wiring Pillar
Support Encoding ChipEV1527
Working Temperature-20 ~ +80°C
Dimensions (L x W)68.2 x 48.2 mm
Package Size7.5 x 5.5 x 3.0 cm / 2.95 x 2.16 x 1.18 in
Package Weight80g / 2.82oz
CertificationsCE, RoHS
Support APPNo
Hign-concerned ChemicalNone

4. Setup and Installation

Important Safety Note: Always turn off the power supply before wiring. Ensure all connections are correct and secure before restoring power.

4.1. Receiver Board Component Identification

Diagram of the receiver board showing LED, Learning button, and terminal block pins labeled 1-12, L, N, NC, COM, NO.
Receiver Board Layout and Terminal Identification
  • LED: Status indicator.
  • Learning button: Used for pairing remote controls and resetting.
  • Terminal Block:
    • NC (Normally Closed): Pins 1, 4, 7, 10
    • COM (Common): Pins 2, 5, 8, 11
    • NO (Normally Open): Pins 3, 6, 9, 12
    • L (Live Wire Input): Power input
    • N (Neutral Wire Input): Power input

4.2. Wiring Diagrams

The following diagrams illustrate common wiring configurations. Always ensure correct polarity and secure connections.

4.2.1. AC Bulb Wiring Diagram

Wiring diagram for connecting AC bulbs to the relay module. Shows AC 90V-250V power input to L and N, and bulbs connected between COM and NO terminals.
AC Bulb Wiring Diagram

4.2.2. External Power Connection Diagram

Wiring diagram for connecting the relay module with an external power supply. Shows AC 90V-250V input to L and N, and external power connected to the load.
External Power Connection Diagram

4.2.3. AC Motor Wiring Diagram

For controlling AC motors, connect the AC 90V-250V power to the L and N terminals. Connect the motor's power input to the COM and NO terminals of the desired relay channel. Ensure that the motor's wiring is compatible with the relay's switching capacity and mode of operation (e.g., for directional control, two relays might be needed in a latched or interlocked configuration).

4.2.4. Connection Access Control Diagram

These diagrams illustrate how to integrate the relay module into access control systems, such as electric door locks or garage door openers. The specific wiring will depend on the type of access control system (e.g., normally open or normally closed trigger).

Access control wiring diagram showing connections for a door lock switch.
Access Control Wiring Diagram 1
Access control wiring diagram showing connections for a door lock switch with power input.
Access Control Wiring Diagram 2
Access control wiring diagram showing connections for a door lock switch with multiple control points.
Access Control Wiring Diagram 3

5. Operating Modes

The relay module supports various operating modes, which determine how the remote control buttons interact with the relays. The modes are set by pressing the learning button on the receiver board a specific number of times.

Diagram illustrating the learning button presses for Momentary, Toggle, Latched modes, and Reset.
Learning Button Presses for Different Modes
  1. Momentary Mode (Jogging Function):
    Press the control board pairing button once. The LED indicator will flash once, then stay on. Press the remote control button (e.g., button A) that needs pairing. The control board LED indicator will flash three times continuously, indicating successful pairing. In this mode, the relay is active only while the remote button is pressed.
  2. Self-Locking Mode (Toggle Function):
    Press the control board pairing button twice in a row. The LED indicator will flash twice, then stay on. Press the remote control button (e.g., button A) that needs pairing. The control board LED indicator will flash three times continuously, indicating successful pairing. In this mode, one press turns the relay ON, and another press turns it OFF.
  3. Interlocking Mode (Latched Function):
    Press the control board code matching button three times in a row. The LED indicator will flash three times, then stay on. Press the remote control button (e.g., button A) that needs to match the code. The control board LED indicator will flash three times continuously, indicating successful pairing. In this mode, pressing one button turns its corresponding relay ON and turns all other relays OFF.
  4. Two-Way Jog and Two-Way Self-Locking:
    Press the control board code matching button 4 times continuously. The LED indicator will flash 4 times, then stay on. Press the remote control button that needs to match the code. The control board LED indicator will flash 3 times continuously, indicating successful pairing.
  5. Two-Way Jog and Two-Way Interlock:
    Press the control board code matching button 5 times continuously. The LED indicator will flash 5 times, then stay on. Press the remote control button that needs to match the code. The control board LED indicator will flash 3 times continuously, indicating successful pairing.
  6. Two-Way Self-Locking and Two-Way Interlocking:
    Press the control board code matching button 6 times continuously. The LED indicator will flash 6 times, then stay on. Press the remote control button that needs to match the code. The control board LED indicator will flash 3 times continuously, indicating successful pairing.
  7. Two-Way Interlocking and Two-Way Interlocking:
    Press the control board code matching button 7 times continuously. The LED indicator will flash 7 times, then stay on. Press the remote control button that needs to match the code. The control board LED indicator will flash 3 times continuously, indicating successful pairing.

6. Reset Function

To clear all previously learned remote control data from the receiver's memory:

  • Press the control board's learning button 8 times in a row.
  • The LED indicator light will flash 8 times continuously.
  • After the 8 flashes, the LED will turn off, indicating that the code clearing is complete and all previously learned remote control key codes have been erased.

Once reset, all remote controls will no longer be able to operate the receiver until they are re-paired.

7. Troubleshooting

  • Device not responding to remote:
    Check if the remote control's battery is low and replace it if necessary. Ensure the remote is within the effective range (>70m in free space). Verify that the receiver is powered on and the LED indicator is functioning. Re-pair the remote control to the receiver following the instructions in Section 5.
  • Motor not starting/operating correctly:
    Confirm that the wiring for the motor is correct according to the diagrams in Section 4. Ensure the power supply to both the receiver and the motor is adequate and stable. Check that the correct operating mode (Momentary, Toggle, or Latched) is set for your motor application. For electric gates, ensure the motor's control input is compatible with the relay's output (NO/NC/COM).
  • Difficulty changing operating modes:
    Ensure you are pressing the learning button the correct number of times as specified in Section 5 for the desired mode. Wait for the LED to flash and stay on before pressing the remote button. If issues persist, perform a full reset (Section 6) and then re-pair the remote in the desired mode.
  • Interference issues:
    Avoid installing the receiver near large metal objects or other electronic devices that may cause strong interference. Maintain a clear line of sight or reasonable distance between the remote and the receiver for optimal performance.

8. User Tips

  • Battery Replacement: When the remote control's battery voltage is low, the remote distance will generally become shorter. Replace the battery in time to maintain optimal performance.
  • Wiring Safety: Always ensure the power is OFF when performing any wiring. Only power on the system after all connections have been double-checked and confirmed to be correct.
  • Minimizing Interference: When using wireless electronic products, be mindful of potential interference sources such as metal enclosures or large electronic devices. Position the receiver and remote to avoid such interference, which can lead to reduced range or operational failure.
  • Programming Multiple Remotes: While the manual does not specify a maximum number of remotes, the receiver uses an intelligent learning code. For applications requiring a large number of remotes (e.g., 40-50 units), it is advisable to test the system with your specific quantity to ensure all remotes can be programmed and operate reliably.
  • Mixed Mode Configuration: The module offers various operating modes, including combinations of jogging, self-locking, and interlocking. Carefully review the 8 available modes in Section 5 to select the one that best suits your specific application, whether you need some channels to act as momentary buttons and others as toggle switches.

9. Maintenance

  • Keep the receiver module and remote controls clean and dry. Avoid exposure to moisture, extreme temperatures, or corrosive environments.
  • Regularly check the remote control batteries and replace them when performance degrades.
  • Ensure all wiring connections remain secure. Loose connections can lead to intermittent operation or electrical hazards.
  • Do not attempt to disassemble or repair the module yourself. Refer to qualified personnel for any repairs.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact your seller. A comprehensive user manual in PDF format may be available for download at this link.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.