CaDA Red Blade Sports Car C53004

Contents

CaDA Red Blade Sports Car Building Blocks Instruction Manual

Model: C53004

Introduction

Thank you for choosing the CaDA Red Blade Sports Car Building Blocks. This set allows you to construct a detailed sports car model and control it via a smartphone application, offering multiple operation modes including remote control, drag-and-drop programming, gyroscope control, and path following. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure an enjoyable experience.

CaDA Red Blade Sports Car Building Blocks with remote and phone app
The CaDA Red Blade Sports Car Building Blocks, featuring 405 pieces, app control, and a dedicated remote.

Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Keep small parts away from children under 3 years old to prevent choking hazards.
  • Do not expose the product to extreme temperatures or direct sunlight.
  • Do not immerse the electronic components in water.
  • Ensure batteries are handled and charged correctly to avoid risks.

Package Contents

Your CaDA Red Blade Sports Car Building Blocks package should contain:

  • 405 building block pieces for the sports car.
  • Smart Chassis with integrated rechargeable battery (3.7V 500mAh).
  • Remote Control unit.
  • Instruction manual (this document).
  • USB charging cable for the chassis battery.
Product dimensions of the CaDA Red Blade Sports Car and its packaging
Dimensions of the assembled car (42.0cm x 16.0cm x 8.0cm) and its packaging box (42.0cm x 34.0cm x 9.0cm).

Setup

1. Assembly

  1. Follow the step-by-step instructions provided in the separate building guide to assemble the Red Blade Sports Car using the 405 building blocks.
  2. Ensure all connections are secure to prevent parts from detaching during operation.

2. Battery Installation and Charging

The smart chassis includes a rechargeable 3.7V 500mAh Lithium Battery.

Chassis with rechargeable battery and steering adjustment
The car chassis, highlighting the 3.7V 500mAh rechargeable battery and steering adjustment mechanism.
  • Locate the battery compartment on the smart chassis.
  • Connect the battery to the chassis if not already connected.
  • Use the provided USB charging cable to charge the chassis battery. Connect one end to the chassis and the other to a standard USB power adapter (not included).
  • The charging indicator (if present) will show charging status. Charge fully before first use.

3. App Installation and Pairing

The CaDA Red Blade Sports Car can be controlled via a dedicated smartphone application.

Smartphone app showing multimode operations: Remote control, Drag and drop, Gyroscope, Path
The CaDA app interface displaying various control modes: Remote control, Drag and drop, Gyroscope, and Path.
  • Download the official CaDA app from your device's app store (iOS/Android).
  • Ensure your smartphone's Bluetooth is enabled.
  • Turn on the power switch on the car's smart chassis.
  • Open the CaDA app and follow the on-screen instructions to connect to your Red Blade Sports Car via Bluetooth. The chassis also supports 2.4GHz connection.
  • Once connected, the app will display the available control interfaces.

4. Steering Trim Adjustment

The smart chassis features a steering trim function for precise control.

Smart Chassis Features: Bluetooth, 2.4GHz, Steering trim
Diagram illustrating the smart chassis and its features: Bluetooth connection, 2.4GHz connection, and steering trim.
  • After assembly and pairing, if the car does not drive straight, use the steering trim function in the app or on the physical remote control to adjust the steering angle until the car moves in a straight line.

Operating the Red Blade Sports Car

The CaDA app offers multiple modes for controlling your sports car:

1. Remote Control Mode

Gyroscope operations interface with driving, steering, speed controls
The app's remote control interface, showing controls for driving, steering, speed, and special maneuvers like S-shaped routes.
  • Select 'Remote Control' from the app's main menu.
  • Use the on-screen joysticks or buttons to control the car's movement (driving, steering) and speed.
  • Special functions like 'S-shaped route' or 'Go straight and turn around' may be available.

2. Drag and Drop Programming Mode

This mode allows you to program a sequence of actions for the car using a visual, block-based interface, similar to Scratch programming.

Drag and drop programming interface with conditional modules and time span settings
The drag-and-drop programming interface, demonstrating conditional module combinations and the ability to preset time spans for each module.
Drag and drop programming modules: Start, Infinite loop, Number of cycles, Stop, Pause, Turn left, Forward, Turn right
Visual representation of the drag-and-drop programming modules, including Start, Infinite loop, Number of cycles, Stop, Pause, Turn left, Forward, and Turn right.
  • Select 'Drag and Drop' from the app's main menu.
  • Drag and combine command modules (e.g., Forward, Turn Left, Stop, Pause) onto the programming canvas.
  • You can set parameters for each module, such as the duration of an action.
  • Use 'Conditional module drag combination' for more complex sequences.
  • Press 'Run' to execute your programmed sequence.

3. Gyroscope Control Mode

Control the car by tilting your smartphone using its built-in gravity sensor.

Gyroscope operations with gravity sensor control, showing vehicle location and operating range
The gyroscope control interface, illustrating how gravity sensor input translates to vehicle movement within an operating range.
  • Select 'Gyroscope' from the app's main menu.
  • Tilt your phone to steer the car.
  • The app interface will show the 'Operating range of vehicle' and 'Vehicle location'.
  • Use the on-screen controls for speed and other functions.

4. Path Operations Mode

Draw a path on your smartphone screen, and the car will follow it.

Path operations interface for drawing a path for the car to follow
The path operations interface, where users can draw a 'Path line' for the car to follow, with 'Start' and 'Return key' functions.
  • Select 'Path' from the app's main menu.
  • Draw a desired 'Path line' on the screen with your finger.
  • Press 'Start' to make the car follow the drawn path.
  • Use the 'Return key' to go back to the previous screen.

Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the building blocks and chassis. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the assembled car and loose blocks in a cool, dry place away from direct sunlight to prevent discoloration or warping.
  • Battery Care: Recharge the battery regularly, even if not in use, to maintain its lifespan. Do not overcharge or completely drain the battery.
  • Electronic Components: Keep the smart chassis and remote control dry. Avoid dropping them or exposing them to excessive force.

Troubleshooting

Car does not respond to controls:
  • Ensure the car's power switch is ON.
  • Check if the chassis battery is charged. Recharge if necessary.
  • Verify that the app is correctly paired with the car via Bluetooth.
  • Restart the app and the car, then attempt to reconnect.
Car does not drive straight:
  • Use the steering trim function in the app or on the remote to adjust the steering.
  • Check for any obstructions in the wheels or chassis.
App connectivity issues:
  • Ensure Bluetooth is enabled on your smartphone.
  • Move closer to the car to ensure a strong signal.
  • Close and reopen the app.
  • Restart your smartphone.
Programming mode issues:
  • Double-check your drag-and-drop sequence for any logical errors or missing modules.
  • Ensure all modules have appropriate time spans or parameters set.

Specifications

FeatureDetail
Model NumberC53004
Number of Pieces405
Block SizeSmall building block (Compatible with Lego)
MaterialABS Plastic
Plastic Block ShapeSelf-Locking Bricks
Power SourceLithium Battery (3.7V 500mAh)
Control MethodsPhone APP (Remote Control, Drag and Drop Programming, Gyroscope, Path), Physical Remote Control
ConnectivityBluetooth, 2.4GHz
Recommended Age6-12Y, 14+y, 18+
CertificationCE
OriginMainland China
Assembled Car Dimensions42.0cm (L) x 16.0cm (W) x 8.0cm (H)
Package Weight1.1 kg

User Tips

  • For younger users, start with the basic remote control mode before exploring programming or gyroscope controls.
  • Experiment with different drag-and-drop programming sequences to understand how each module affects the car's movement.
  • Ensure a clear, flat surface for optimal car performance, especially when using path-following or gyroscope modes.
  • Regularly check for firmware updates for the app to ensure the best performance and access to new features.

Warranty and Support

CaDA products are designed for quality and durability. For any issues or questions not covered in this manual, please contact CaDA customer support through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.