1. Introduction
Thank you for choosing the SAMOLLA TX1000 Electronic Baitcasting Fishing Reel. This advanced fishing reel is designed for deep sea, bridge, boat, raft, catfishing, and trolling, offering a waterproof design, large line capacity, and a digital display with various smart functions. Please read this manual carefully to understand the features and proper operation of your new fishing reel.

2. Key Features
The SAMOLLA TX1000 reel is equipped with numerous features to enhance your fishing experience:
- Digital Display: High-definition large screen displays throwing distance, line length, and other vital information.
- 8 Functions: Real-time recording of wire length, water depth positioning memory, multiple wire number selection, middle fish alarm, bait close range alarm, one-click reset for wire breakage, night background light, and automatic screen shutdown for energy saving.
- Strong Braking Force: 16KG max drag for handling large fish.
- Magnetic Brake System: 10 strong magnetic brake beans with 24 gears of adjustment for precise control.
- Durable Construction: Stainless steel reinforced metal base, corrosion-resistant, and seawater resistant.
- USB Type-C Charging: Built-in battery with a waterproof USB Type-C charging port.
- Precision Brass Gear: 6.4:1 gear ratio for smooth operation and strong performance.
- Funnel-Shaped Vortex Line Guide: Reduces line friction and increases casting distance.


3. Specifications
| Attribute | Value |
|---|---|
| Model | TX1000 |
| Material | Metal |
| Gear Ratio | 6.4:1 |
| Ball Bearings | 7+1BB |
| Max Drag | 16KG |
| Weight | 271g (approx.) |
| Line Capacity (mm/m) | 0.23mm/330m, 0.33mm/230m, 0.38mm/160m |
| Baits Type | Fake Bait |
| Fishing Reels Type | Baitcast Reel |
| Fishing Method | Bait Casting |
| Position | Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream, Management Field |
Note: Information is for reference only, and may have differences due to manual measurement.





4. Setup Instructions
4.1. Power On/Off
- To Turn On: Long press the LEFT button for 2 seconds.
- To Turn Off: Long press the LEFT button for 2 seconds.
- Automatic Shutdown: The reel will automatically shut down and enter low-power consumption mode if there is no operation within 30 minutes.

4.2. Initial Settings (Wire Number & Winding)
After powering on, strictly follow these steps to set up your reel before use:
- Step 1: Power On
Long press the LEFT button to turn on the device. - Step 2: Select Wire Number
Long press the RIGHT button to enter settings. Short press the LEFT button to cycle through PE line numbers (2.0 → 3.0 → 4.0 → 5.0 → 6.0 → 7.0 → 8.0). Select the desired line number. Long press the RIGHT button for 2 seconds to automatically save the selected line number. - Step 3: Enter Winding Mode to Start Winding
Wrap the fishing line according to the required length. If it is necessary to restart the winding process, double-click the LEFT button to reset to zero to restart the winding. Long press the RIGHT button to save the length of the wrapped thread and switch to normal working mode. - Step 4: Enter the Working State
The screen will display the real-time line length. When the line is fully collected, the screen still shows the number of meters. Double press the LEFT button to reset to zero.



Video demonstrating basic operations including power on, line number selection, winding, output length display, backlight, alarm, depth memory, and wire breakage reset.
5. Operating Instructions
5.1. Retracting and Unwinding Line
- In normal working conditions, the screen will display the outgoing line distance.
- When the wire collection is completed, if the screen display length is not 0, double-click the LEFT button to clear the number of meters out of the line.
5.2. Fish Alarm Function
- Short press the RIGHT button to turn on the hook alarm. The buzzer will sound once, and the outlet meter will flash once every 0.5 seconds to indicate it's on.
- When a fish bites the bait and drags the line out, the screen will flash continuously, and the buzzer will beep.
- After the alarm lasts for approximately 6 seconds, the screen returns to normal.
- To turn off the alarm, click the RIGHT button again.


5.3. Depth Positioning Function
- When the bait reaches the desired depth (greater than 1M), left-click on the single machine to activate the depth positioning memory function.
- The 'METER' letter on the screen will start flashing, indicating that depth memory is on. The system will record the current depth.
- When the bait is retracted and the line is released again to reach the memory depth, the fishing reel emits a beep alarm sound, indicating that the positioning depth has been reached.

5.4. Bait Approaching Reminder
- When the bait is 5 or 3 meters away from the person during reel take-up, the fishing reel emits a drip alarm sound.
- This function helps prevent the fishing hook from causing harm by winding up too quickly.

5.5. Backlight Operation
- Under normal working conditions, double-click the RIGHT button to turn the backlight ON or OFF.
- When the backlight is ON, the screen displays "LIGHT".
- If there is no operation for 20 seconds, the backlight will automatically turn off to save power.
- When the rocker arm is rotated, the backlight will light up again.

5.6. One-Click Slow Down Button
- The reel features a one-click slow-down button for faster and more convenient control of wire laying.

6. Maintenance
6.1. Cleaning
- After each use, especially in saltwater, rinse the reel with fresh water.
- Wipe the reel dry with a soft cloth.
- Do not use harsh chemicals or abrasive materials for cleaning.
6.2. Lubrication
- Periodically apply a small amount of reel oil to moving parts and grease to gears as recommended by fishing reel maintenance guides.
- Avoid over-lubrication, which can attract dirt and debris.
6.3. Storage
- Store the reel in a dry, cool place away from direct sunlight and extreme temperatures.
- Ensure the drag is loosened before storage to prevent compression of the drag washers.
6.4. Charging
- Use the provided USB Type-C cable to charge the reel.
- The charging indicator light will be ON during charging and turn OFF when charging is complete.
- Ensure the waterproof plug is securely in place when not charging to maintain water resistance.

7. Troubleshooting
7.1. Low Voltage Alarm
- If the display shows a low battery icon (power less than 1/4) or the screen figures appear blurred, it means the battery is low.
- Charge the reel immediately using the USB Type-C port.

7.2. Wire Breakage Reset Function
- During fishing, if the line accidentally breaks, there is no need to manually reset the reel.
- Retrieve the remaining line, then press both the LEFT and RIGHT buttons simultaneously to clear the broken line.
- The fishing reel automatically remembers the length of the remaining line and can be used normally.


8. User Tips
- Initial Setup: Ensure you carefully follow the line number selection and winding instructions before your first use to ensure accurate line counting.
- Charging: Always charge the reel when the low voltage alarm appears to maintain optimal performance and battery life.
- Waterproof Plug: Keep the USB Type-C port's waterproof plug securely closed when not charging to prevent water ingress.
9. Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact SAMOLLA customer service or refer to the official SAMOLLA website. Keep your purchase receipt for warranty claims.