Avatarbot Smart Curtain Motor LY-1668 Instruction Manual

1. Product Overview

The Avatarbot Smart Curtain Motor LY-1668 is designed to automate your curtains, providing convenience through remote control and hand-start functionality. It is compatible with various curtain track types, transforming traditional curtains into smart ones without needing to replace existing tracks.

2. Setup and Installation

2.1 Track Compatibility

The Smart Curtain Motor is designed for easy installation on various track types:

• Roman Pole Track: Diameter range 1.6-3.8 cm (0.6-1.5 inches)
• U-shaped Track: Size 0.4-1 cm (0.16-0.39 inches) width, 1-3 cm (0.39-1.18 inches) height
• T-shaped Track: Size 0.7-2.6 cm (0.27-1.02 inches)

2.2 Installation Steps

Installation is designed to be simple, involving 'one hanging and one splicing'.

1. Ensure your curtain track is clean and free of obstructions.
2. Attach the motor securely to the curtain track according to your specific track type (Roman pole, U-shaped, or T-shaped). The motor should hang freely and not impede curtain movement.
3. Ensure the curtain fabric is properly attached to the motor's clips or hooks.

2.3 Remote Control Pairing

To pair the remote control with the curtain motor:

1. Press and hold the power switch of the curtain motor for 3 seconds until the blue indicator light flashes slowly.
2. On the remote control, press and hold the 'Stop' and 'Open' buttons simultaneously for three seconds to initiate pairing.
3. Once the motor's indicator light stops flashing and remains solid, the pairing is complete.
4. Test the remote control by pressing 'Open' and 'Close' to ensure proper functionality.

3. Operating Instructions

3.1 Remote Control Operation

Use the provided handheld remote control to operate your curtains:

• Open: Press the 'Open' button to fully open the curtains.
• Close: Press the 'Close' button to fully close the curtains.
• Stop: Press the 'Stop' button to halt the curtains at any desired position.

3.2 Hand Start Function

The motor features a 'Hand Start' function. Gently pull the curtain in the desired direction (open or close), and the motor will automatically detect the movement and continue to open or close the curtain fully.

4. Maintenance

4.1 Charging

The curtain motor is equipped with a USB charging port. A full charge typically takes 5-6 hours. Ensure the motor is fully charged for optimal performance.

4.2 General Care

• Keep the motor clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to water or excessive moisture.
• Do not attempt to disassemble the motor, as this may void the warranty.

5. Troubleshooting

5.1 Remote Control Not Responding

• Check if the motor's battery is charged.
• Ensure the remote control is within range and has working batteries.
• Re-attempt the remote control pairing process as described in Section 2.3.

5.2 Curtains Not Moving

• Verify that the motor is securely attached to the track and there are no physical obstructions.
• Check if the motor's battery is sufficiently charged.
• Ensure the curtain fabric is properly engaged with the motor's mechanism.

5.3 Motor Making Unusual Noises

• Inspect the curtain track for any debris or damage that might be causing friction.
• Ensure the motor is correctly aligned on the track.
• If the issue persists, contact customer support.

6. Specifications

7. User Tips

No specific user tips were available from provided reviews or Q&A. However, general advice for smart curtain motors includes:

• Regularly check the battery level to ensure uninterrupted operation.
• Keep the curtain track clean to prevent dust or debris from affecting motor performance.
• If using multiple motors, ensure each remote is correctly paired to its respective motor to avoid accidental operation.

8. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.