1. Product Overview
The RAYKUBE N1 TT Lock Smart Fingerprint Lock is an advanced security solution designed for easy replacement of existing lock cylinders. It offers multiple unlocking methods and smart features for enhanced convenience and control. This manual provides detailed instructions for installation, operation, and maintenance.
2. Setup and Installation
The RAYKUBE N1 Smart Lock is designed for easy DIY installation, requiring no drilling or complex wiring. It replaces your existing lock cylinder, retaining the original mortise lock body.
2.1 Compatibility
- Suitable Door Thickness: 40-90mm
- Suitable Door Type: Steel Door, Wooden Door, Glass Door, Brass Door, Stainless Steel Door, Other.
- Mortise Compatibility: Suitable for more than 90% European standard lock bodies, including mortise lock, passage mortise lock, night latch mortise lock, deadbolt mortise lock, bathroom mortise lock, escape mortise lock, and mortise lock 85Z.
2.2 Installation Steps
Installation typically involves replacing the existing lock cylinder. No new holes are required, and the process can be completed in approximately 10 minutes.
- Remove Old Cylinder: Remove your existing lock cylinder from the door.
- Prepare New Cylinder: The new smart lock cylinder comes with a cable. Ensure the plate is cut to the correct length according to your door thickness (40-90mm).
- Insert New Cylinder: Insert the new smart lock cylinder into the mortise. The cable should pass through the lock mechanism without obstruction.
- Attach Lock Panels: Connect the front and rear panels of the smart lock to the cylinder. The cable connects the two panels.
- Secure Panels: Secure the panels with the provided screws.
- Install Door Sensor (Optional): If included, install the smart door sensor on the door frame adjacent to the lock for automatic locking functionality.
3. Operation
The RAYKUBE N1 Smart Lock offers multiple convenient ways to unlock and manage access.
3.1 Unlocking Methods
- Fingerprint Unlock: Place your registered finger on the sensor for quick access. The FPC semiconductor sensor identifies dry or wet fingers in 1 second.
- Password Unlock: Enter your passcode on the keypad. Supports 20-bit virtual passcode technology to prevent peeping.
- IC Card Unlock: Tap a registered IC card near the card reader (within 2cm).
- NFC Unlock: For Android/Harmony mobile phones, copy the key card to your phone's NFC function. Apple systems can use their wallet feature.
- TT Lock App Unlock: Use the TT Lock App on your smartphone via Bluetooth to unlock the door. With an optional G2 Gateway (sold separately), you can unlock remotely via Wi-Fi.
- Mechanical Key Unlock: In case of power failure or emergency, use the provided physical key to unlock the door.
3.2 TT Lock App Features
The TT Lock App provides comprehensive control and management of your smart lock.
- Temporary Passwords: Generate various types of passwords (permanent, timed, one-time, custom, recurring) and share them with guests or service providers.
- Remote Unlock: Unlock the door remotely via Bluetooth. With an optional G2 Gateway, remote unlocking is possible from anywhere with an internet connection.
- Passage Mode: Set the lock to remain unlocked for free entry and exit during specific periods, ideal for offices or busy households.
- Auto Lock Mode: Configure the lock to automatically lock after a set delay (e.g., 5s, 6s, 7s...). This can also be assisted by the smart door sensor.
- Access Records: View a detailed history of who unlocked the door, when, and by what method. This feature can also be used for employee attendance tracking.
- Voice Control: With a G2 Gateway, the lock can integrate with Amazon Alexa and Google Assistant for voice commands (availability may vary by region).
4. Maintenance
4.1 Battery Replacement
The smart lock is powered by 4 CR123A dry batteries, offering approximately one year of durability. These batteries are widely available and easy to replace.
4.2 Cleaning
Wipe the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
5. Troubleshooting
- Low Battery Alarm: The lock will provide a low-voltage alarm when battery power is low (around 5.1V). Replace batteries promptly.
- Emergency Power: If the batteries completely run out, you can use a power bank connected via the Type-C port for emergency power to unlock the door.
- Mechanical Key: Always keep the mechanical keys in a safe, accessible location outside the locked area for emergency access.
- Anti-Peeping Passcode: If you suspect someone is observing you enter your passcode, utilize the 20-bit virtual passcode feature by entering random digits before or after your actual code.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | RAYKUBE |
| Model Number | Z-18 |
| Material | Aluminium alloy |
| Power Supply | DRY BATTERY (4x CR123A) |
| Low-voltage alarm | 5.1V |
| Standby Current | 60uA |
| Operating Current | <400mA |
| Unlocking Time | 1.5s |
| Operating Temperature | -40~70°C |
| Protection Level | IP66 |
| Connectivity | Bluetooth 4.1 BLE |
| Supported Mobile Systems | Android 4.3 / iOS 0.0 (or above) |
| Ways To Unlock | Fingerprint, Password, IC Card, NFC, TT Lock App, Mechanical Key |
| Doorknob Function | Biometric, Key & Keypad |
| Handle Direction | Direction Reversible |
| Fit Door Thickness | 40-90mm |
| Suitable Door Type | Steel Door, Wooden Door, Glass Door, Brass Door, Stainless Steel Door, Other |
| Included Components | Cylinder, Front Panel, Rear Panel, 5 Smart Cards, 2 Keys, 4 CR123A Batteries, Screw Kit, English Manual |
| Special Features | Support Gateway (G2 Gateway sold separately) |
7. User Tips
- Door Sensor for Auto-Lock: For reliable automatic locking, ensure the smart door sensor is correctly installed and aligned. This will trigger the lock automatically when the door is closed.
- Rechargeable Batteries: While the lock uses CR123A dry batteries, some users inquire about rechargeable 3.7V 123A Lithium batteries. Always verify compatibility with the manufacturer to avoid potential damage or voiding warranty.
- Doors Without Handles: The N1 lock is designed to replace existing cylinders. If your door does not have an existing handle, you may need to purchase options that include handles (e.g., Option 3 or 4) or ensure your door mechanism is compatible with the cylinder-only version.
- Mortise vs. Cylinder: The RAYKUBE N1 primarily replaces the cylinder, retaining your existing mortise lock body. This simplifies installation significantly.
- TT Lock App Setup: When setting up the lock with the TT Lock App, keep your phone close to the lock for a stable Bluetooth connection.
8. Warranty and Support
Your RAYKUBE N1 Smart Fingerprint Lock comes with an English instruction manual included in the package. For any technical assistance or support, please refer to the contact information provided in the manual or on the official RAYKUBE website.
9. Package Contents
- Front panel x 1
- Rear panel x 1
- Smart card x 5
- Key x 2
- CR123A batteries x 4
- Screw Kit x 1
- English Manual x 1 pc
