YiFanHeRong DS2-XD

Contents

DS2-XD Digital Display Force Gauge Instruction Manual

Model: DS2-XD Series (2N to 5000N)

Brand: YiFanHeRong

1. Introduction

Thank you for choosing the YiFanHeRong DS2-XD series digital force gauge. This instrument is a small, multi-function, and high-precision device designed for various push and pull load tests, plug and thrust tests, and damage tests. It features a high-resolution digital display, long service life, and simple operation, making it a highly efficient and precise mechanical testing tool.

YiFanHeRong DS2-XD Digital Display Force Gauge with connected micro pressure sensor

Figure 1: DS2-XD Digital Display Force Gauge with Micro Pressure Sensor

2. Safety Information

Please read and understand the following safety precautions before operating the device:

  • Overload Warning: The device has a safety overload limit of 150% of its rated capacity. Exceeding this limit will cause the screen to flash, indicating an overload condition. Continuous overloading can damage the sensor.
  • Ensure the device is powered off when connecting or disconnecting the sensor or power supply.
  • Keep the device away from water and extreme temperatures.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.

3. Package Contents

The standard package includes:

  • DS2-XD Digital Force Gauge Main Unit
  • Micro Pressure Sensor (quantity and type may vary by model)
  • 6 Standard Accessories (e.g., various test shafts)
  • AC Adapter
  • USB Data Line
  • User Manual
  • Test Report
  • Portable Carrying Case
Accessories included with the DS2-XD force gauge, including manual, test report, data line, and a carrying case.

Figure 2: Included Accessories and Carrying Case

4. Product Overview and Components

The DS2-XD force gauge consists of a main display unit and an external micro pressure sensor. Key components and controls are detailed below:

Diagram of the DS2-XD force gauge showing the display, ON/OFF, SEND, ZERO, and PEAK buttons, and the test shaft connection.

Figure 3: Force Gauge Controls and Display

  • Test Shaft (M6P1): Located at the top of the main unit, used to connect product accessories for thrust and tension measurements.
  • Display: 4-bit LCD screen showing measured data, which can be flipped 180 degrees for convenience.
  • ON/OFF Button: Press to turn the device on or off. All symbols are displayed on the LCD upon power-on.
  • SEND/ENTER Button: After the SEND key is turned on, press this key to turn off the backlight. In parameter setting mode, this key saves parameters.
  • ZERO Button: Used to reset the display to zero. Press and hold in the off state to set positive/negative display, test unit, and other parameters.
  • PEAK Button: Switches between "PEAK" and "TRACK" modes. Press and hold in the off state to set upper/lower limit alarm, sampling rate, and other parameters.
Close-up images of micro pressure sensors, the charging hole, and the sensor connector on the DS2-XD force gauge.

Figure 4: Micro Pressure Sensors, Charging Hole, and Sensor Connector

  • Micro Pressure Sensors: External sensors connected to the main unit for force measurement.
  • Charging Hole: For connecting the AC adapter to charge the internal battery.
  • Sensor Connector: Port for connecting the micro pressure sensor cable to the main unit.

5. Setup

  1. Unpacking: Carefully remove all components from the portable carrying case. Verify all items listed in the Package Contents section are present.
  2. Charging the Battery: Before first use, connect the AC adapter to the charging hole on the force gauge and plug it into a power outlet. The battery symbol on the display will indicate charging status.
  3. Connecting the Sensor: Connect the micro pressure sensor cable to the sensor connector port on the main unit. Ensure a secure connection.
  4. Attaching Accessories: If required for your specific test, attach the appropriate test shaft or other accessories to the test shaft (M6P1) at the top of the main unit.

6. Operating Instructions

6.1 Power On/Off

  • Press the ON/OFF button to turn the device on. The LCD will display all symbols briefly.
  • Press the ON/OFF button again to turn the device off.

6.2 Display Features

Detailed diagram of the DS2-XD LCD display, showing indicators for direction of force, upper/lower limit alarm, measured value, units, battery alarm, and peak mode.

Figure 5: LCD Display Details

  • Display Flip: The LCD screen can be rotated 180 degrees for optimal viewing angle.
  • Direction of Force: Displays an arrow indicating pressure (down arrow) or pulling force (up arrow).
  • Upper and Lower Limit Alarm: Displays 'H' (High) if measured value exceeds the upper limit, or 'L' (Low) if below the lower limit, accompanied by a beep.
  • Measuring Range/Measured Value: Shows the current force reading.
  • Units of Measurement: Displays the current unit (N, kgf, lbf).
  • Battery Alarm: Flashes when the internal battery voltage is low.
  • Peak Mode Display: The word "PEAK" is displayed when in Peak mode, used to record the final result of the test.

6.3 Zeroing

  • With no load applied to the sensor, press the ZERO button to reset the display to 0.0.

6.4 Unit Conversion

  • The device supports N, KGF, and lbf units. Refer to the manual for specific button combinations or menu navigation to switch between units.

6.5 Peak Hold Function and Real-time Measurement

  • Press the PEAK button to toggle between "PEAK" mode and "TRACK" (real-time) mode.
  • In "PEAK" mode, the display will hold the maximum force detected during the test.
  • In "TRACK" mode, the display shows real-time force measurements.

6.6 Parameter Settings (Advanced)

To access advanced settings such as upper/lower limit alarms, sampling rate, and display orientation (positive/negative), press and hold the ZERO or PEAK button while the device is OFF, then power it on. Follow the on-screen prompts to navigate and adjust parameters. Use the SEND/ENTER button to save changes.

6.7 Data Output to Computer

The DS2-XD can be connected to a computer via USB to output real-time data. This allows for detailed analysis and recording of test results.

Video 1: Product demonstration showing power on, display flip, unit change, real-time pressure test, peak pressure test, and data transmission to computer.

Screenshot of the DS2-XD force gauge connected to a computer, displaying real-time force data and graphs.

Figure 6: Data Output Interface on Computer

For detailed instructions on software installation and data logging, please refer to the dedicated software manual or contact customer support.

7. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the force gauge and its accessories in the provided portable case in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Battery Care: Recharge the battery when the low battery indicator flashes. Avoid completely draining the battery for extended periods to prolong its lifespan.
  • Sensor Care: Handle the micro pressure sensor with care. Avoid dropping or subjecting it to sudden impacts.

8. Troubleshooting

Problem Possible Cause Solution
Device does not power on Low battery; Power button not pressed correctly Charge the battery; Ensure firm press on ON/OFF button
Screen flashes / Overload warning Force applied exceeds 150% of rated capacity Reduce applied force; Ensure correct model for load
Low battery symbol blinks Battery charge is low Connect AC adapter to charge the internal battery
Inaccurate readings Sensor not properly connected; Device not zeroed; Damaged sensor Check sensor connection; Perform zero calibration; Contact support if sensor is damaged

9. Specifications

Parameter Value
Brand Name YiFanHeRong
Model Number DS2-XD Series (e.g., DS2-XD-100N, DS2-XD-5000N)
Display Type DIGITAL (4-bit LCD)
Maximum Load Value 2N (200gf) to 5000N (500kgf) depending on model
Safety Overload 150% rated (100% flashing warning)
Power Supply Built-in high-capacity lithium battery, external AC adapter
Weight Approximately 520g (main unit), depending on maximum load value.
Output Function USB connect to computer for digital display tension and pressure
Accuracy ± 0.1%F.S
Sampling Rate Up to 1000 times per second (selectable)
Units of Measurement N, KGF, lbf
Certification CE
Table showing different DS2-XD models with their maximum load values in Newtons and kilogram-force, and their minimum readings.

Figure 7: DS2-XD Model Specifications

Dimensional drawing of the DS2-XD force gauge, showing its length, width, and height measurements.

Figure 8: Dimensional Drawing of the Force Gauge

10. User Tips

  • For precise measurements, always ensure the sensor is properly calibrated and the device is zeroed before each test.
  • Utilize the selectable sampling rate feature: use a high sampling rate for dynamic tests requiring sensitive reaction (e.g., material tensile tests) and a lower rate for more stable measurements.
  • Take advantage of the LCD screen flip display for comfortable viewing in various testing environments.
  • When performing repetitive tests, the peak hold function can be very useful for quickly capturing and reviewing maximum force values without constant monitoring.

11. Warranty and Support

The DS2-XD Digital Display Force Gauge comes with a 1-month free replacement policy and a one-year free maintenance service from the date of receipt. This warranty covers manufacturing defects and normal wear and tear under proper usage conditions.

  • Free Replacement: Buyers may request a replacement within 15 days of receiving the product if it is found to be defective. The product must be returned in its original condition.
  • Free Maintenance: A one-year free maintenance service is provided. If any part requires replacement during this period, the buyer will be responsible for the cost of the parts.
  • Exclusions: This warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper storage.
  • Contact Support: For warranty claims, technical assistance, or any questions regarding the operation or maintenance of your device, please contact the seller or manufacturer's customer support.

© 2023 YiFanHeRong. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.