Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the JINGSHUNLI TP.HV352T.PB753(N) three-in-one TV motherboard. This board integrates the main control board, power supply, and backlight driver into a single unit, designed for various display equipment applications. Please read this manual carefully before proceeding with installation or troubleshooting.
Specifications
| Feature | Detail |
|---|---|
| Model Number | TP.HV352T.PB753(N) |
| Compatible Equipment Style | Display Equipment |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 36 cm x 15 cm x 5 cm |
| Package Weight | 0.48 kg |
Available Power Output Configurations (Backlight Driver)
The motherboard supports various backlight driver configurations. Please verify the specific power requirements of your display before installation. The following configurations are available, identified by QR code labels on the board:
- Configuration 1 (from QR code B23031196-0A00028):
- Voltage: 30V-84V
- Current: 300mA
- Power: 48W
- Efficiency: 38%

QR code label for 30V-84V, 300mA, 48W backlight configuration. - Configuration 2 (from QR code B23050167-1H00032):
- Voltage: 35V-110V
- Current: 410mA
- Power: 75W
- Efficiency: 51%

QR code label for 35V-110V, 410mA, 75W backlight configuration. - Configuration 3 (from QR code B23041205-1A00322):
- Voltage: 30V-84V
- Current: 600mA
- Power: 48W
- Efficiency: 75%

QR code label for 30V-84V, 600mA, 48W backlight configuration. - Configuration 4 (from QR code B23020551-0A00016):
- Voltage: 35V-110V
- Current: 320mA
- Power: 65W
- Efficiency: 40%

QR code label for 35V-110V, 320mA, 65W backlight configuration. - Configuration 5 (from QR code B23051222-0A01368):
- Voltage: 35V-110V
- Current: 600mA
- Power: 65W
- Efficiency: 75%

QR code label for 35V-110V, 600mA, 65W backlight configuration.
Installation and Setup
Before beginning installation, ensure the TV is completely disconnected from the power source. Take necessary precautions against electrostatic discharge (ESD).

- Power Disconnection: Ensure the television is unplugged from the main power outlet.
- Access Motherboard: Carefully open the TV casing to access the existing motherboard.
- Disconnect Old Board: Disconnect all cables from the old motherboard, including power, LVDS, and other input/output connectors. Note the orientation and connection points for each cable.
- Remove Old Board: Unscrew and remove the old motherboard from the TV chassis.
- Install New Board: Place the new TP.HV352T.PB753(N) motherboard into position and secure it with screws.
- Connect Cables:
- Power Input: Connect the main power cable to the designated power input connector (indicated by a yellow arrow on the left side of the board in the image).
- LVDS Display: Connect the LVDS cable to the LVDS display connector (indicated by a yellow arrow on the top right side of the board in the image). Ensure correct orientation to avoid damage.
- Other I/O: Reconnect all other necessary cables such as speakers, control panel, and external input ports (HDMI, USB, etc.) to their corresponding connectors on the new motherboard.
- Verify Connections: Double-check all connections to ensure they are secure and correctly oriented.
- Close Casing: Carefully close the TV casing.
- Initial Power-Up: Plug the TV back into the power outlet and power it on. Observe for proper functionality.
Operation
The TP.HV352T.PB753(N) is a core component of your television. Once correctly installed, its operation is integrated with the TV's existing remote control and on-board buttons. There are no specific operational steps for the motherboard itself beyond ensuring proper installation. The board manages power distribution, video processing, and backlight control, allowing your TV to function as intended.
- Use your TV's standard remote control or physical buttons to power on/off, change channels, adjust volume, and select input sources.
- Refer to your television's original user manual for specific operating instructions related to its features.
Maintenance
To ensure the longevity and optimal performance of your TV motherboard, follow these general maintenance guidelines:
- Keep Clean: Periodically clean the interior of your TV to prevent dust accumulation on the motherboard, which can lead to overheating and component failure. Use compressed air or a soft brush.
- Avoid Moisture: Keep the TV in a dry environment. Moisture can cause short circuits and damage electronic components.
- Ensure Ventilation: Make sure the TV's ventilation openings are not blocked to allow for proper airflow and heat dissipation.
- Power Surges: Consider using a surge protector to protect the TV and its internal components from electrical spikes.
- Professional Service: For any internal cleaning or inspection, it is recommended to seek professional service.
Troubleshooting
If you encounter issues after installing the TP.HV352T.PB753(N) motherboard, consider the following common troubleshooting steps:
| Problem | Possible Cause / Solution |
|---|---|
| No Power / TV does not turn on |
|
| No Display / Black Screen |
|
| Distorted or Incorrect Image |
|
| No Audio |
|
If these steps do not resolve the issue, it is recommended to consult with a qualified technician or contact customer support.
User Tips
- Power Interface Verification: Always verify the power of the interface clearly and ensure it matches the requirements of your display before purchasing and installing. Different power output options are available for this motherboard.
- T-con Board Compatibility: While this is a three-in-one board, ensure compatibility with your existing T-con board if your display uses a separate one, or if you are replacing a board that had a separate T-con.
- Software/Firmware: If you require specific software or firmware for your panel, please contact the seller's technical support for assistance.
Frequently Asked Questions (FAQ)
- Q: Do I need a separate T-con board with this motherboard?
- A: The TP.HV352T.PB753(N) is designed as a three-in-one solution, integrating the main board, power board, and backlight driver. However, it is crucial to verify compatibility with your specific display panel's requirements, especially regarding T-con board integration or external T-con board needs.
- Q: Where can I obtain software or firmware for this board?
- A: For specific software or firmware updates, please contact JINGSHUNLI LED LCD TV accessories Store's technical support. They can provide guidance and necessary files for your particular application.
Warranty and Support
JINGSHUNLI LED LCD TV accessories Store provides pre-sales consultation and after-sales technical support for the TP.HV352T.PB753(N) motherboard. All boards are tested before shipping to ensure quality.
For any questions, technical assistance, or support inquiries, please contact the seller directly through the platform where the product was purchased.