1. Introduction
This manual provides comprehensive instructions for the ZUOYI GMK87 hot-swappable mechanical keyboard kit. It covers setup, operation, maintenance, troubleshooting, and detailed specifications to help you get the most out of your customizable keyboard.
Important Note: This product is a keyboard kit and does not include switches or keycaps. These components must be purchased separately and installed by the user.



2. Package Contents
Please verify that all items are present in your package:
- 1 x ZUOYI GMK87 Keyboard Kit
- 1 x USB Type-C Cable
- 1 x 2.4G Wireless Receiver
- 1 x Instructional Manual (this document)
3. Setup Guide
3.1. Component Assembly (Switches and Keycaps)
The GMK87 features a hot-swappable PCB, allowing for easy installation and removal of 3-pin or 5-pin mechanical switches without soldering. Keycaps can then be installed on top of the switches.

- **Install Switches:** Align the pins of your desired mechanical switches with the corresponding holes on the hot-swappable PCB. Gently push each switch until it clicks into place. Ensure pins are straight to avoid bending.
- **Install Keycaps:** Once all switches are installed, place your chosen keycaps onto the switch stems. Press firmly but gently until each keycap is seated.
3.2. Connectivity Options
The GMK87 offers three versatile connection modes:

3.2.1. Type-C Wired Connection
- Locate the USB Type-C port on the keyboard.
- Connect one end of the provided USB Type-C cable to the keyboard and the other end to an available USB port on your computer.
- Ensure the mode switch (located near the USB port) is set to wired mode (usually indicated by a cable icon or 'W').
- The keyboard will be automatically recognized by your operating system.
3.2.2. 2.4GHz Wireless Connection
- Locate the 2.4G wireless receiver (USB dongle) in the keyboard's USB storage compartment.
- Plug the 2.4G receiver into an available USB port on your computer.
- Ensure the mode switch on the keyboard is set to 2.4G wireless mode (usually indicated by a wireless icon or '2.4G').
- The keyboard should connect automatically.
3.2.3. Bluetooth 5.0 Wireless Connection
- Ensure the mode switch on the keyboard is set to Bluetooth mode (usually indicated by a Bluetooth icon or 'BT').
- On your computer or device, open Bluetooth settings.
- Search for new devices and select "GMK87" (or similar) from the list.
- Follow any on-screen prompts to complete the pairing process.
The keyboard is compatible with both Windows and macOS environments.
4. Operating Instructions
4.1. Basic Functions
- **Typing:** Use the installed keycaps to type as you would on any standard keyboard.
- **Adjustable Volume Knob:** The dedicated knob allows for easy volume control. Rotate clockwise to increase volume, counter-clockwise to decrease. Press to mute/unmute.
- **Anti-Ghosting (NKRO):** The keyboard supports N-Key Rollover (NKRO) in all modes, meaning every key press is registered accurately, even when multiple keys are pressed simultaneously.

4.2. RGB Backlighting
The GMK87 features south-facing LED RGB backlighting. Specific key combinations (often involving the 'Fn' key) are used to cycle through lighting effects, adjust brightness, and change colors. Refer to the VIA software for advanced customization.

4.3. VIA-Programmable Customization
The GMK87 supports VIA software for advanced customization. VIA is an open-source software that provides an intuitive interface for real-time customization without requiring coding skills.

With VIA, you can:
- Remap keys to different functions.
- Configure multiple layers for different key layouts.
- Customize RGB lighting effects, colors, and patterns.
- Create and assign macros for complex commands.
To use VIA, download the software from the official VIA website and connect your keyboard via USB Type-C.
4.4. Battery Management
The keyboard is equipped with a built-in 3000mAh lithium battery for wireless operation. The small screen on the keyboard may display battery status. To charge, connect the keyboard via the USB Type-C cable to a power source.

5. Maintenance and Care
- **Cleaning:** Regularly clean your keyboard with a soft, dry cloth. For deeper cleaning, remove keycaps and use compressed air to clear debris from between switches.
- **Keycap Material:** The keycaps (if purchased separately) are typically made of durable PBT plastic, which is resistant to shine and wear.
- **Gasket Mount Structure:** The gasket-mounted design with Poron foams and a flex-cut PC mounting plate provides a cushioned typing feel and reduces acoustic resonance. Avoid excessive force when disassembling or reassembling the keyboard to maintain the integrity of the gasket structure.
- **Storage:** When not in use, store the keyboard in a clean, dry environment away from direct sunlight and extreme temperatures.
6. Troubleshooting
- **Keyboard not responding:**
- Check the connection mode switch (wired, 2.4G, Bluetooth) and ensure it matches your desired connection.
- For wired connection, try a different USB port or cable.
- For 2.4G wireless, ensure the receiver is securely plugged in and try re-pairing if necessary.
- For Bluetooth, ensure Bluetooth is enabled on your device and try re-pairing.
- Check battery level; recharge if low.
- **Keys not registering:**
- Ensure switches are fully seated in the hot-swappable sockets.
- If a specific key is not working, try swapping its switch with a known working switch to diagnose if the issue is with the switch or the PCB.
- **RGB lighting not working/incorrect:**
- Check keyboard shortcuts for RGB control (often Fn + arrow keys or other designated keys).
- Use the VIA software to verify and adjust lighting settings.
- **Wireless connection unstable:**
- Ensure the keyboard is within the effective range (10 meters for Bluetooth 5.0) of your device.
- Minimize interference from other wireless devices.
- Ensure the keyboard battery is sufficiently charged.
7. Specifications
| Feature | Detail |
|---|---|
| Model | ZUOYI GMK87 Kit |
| Keys Amount | 85 Keys + 1 Knob |
| Hot-Swappable | Yes |
| Connectivity | Type-C Wired, Bluetooth 5.0, 2.4GHz Wireless |
| Structure | Gasket Mount |
| Gasket Material | Poron foams |
| Case Material | ABS Plastic |
| PCB Thickness | 1.2mm |
| Plate Material | PC (Polycarbonate) |
| Battery Capacity | 3000mAh |
| Anti-Ghost Key | NKRO (N-Key Rollover) in all modes |
| LED Direction | South-facing |
| Cable Length | 1.5m |
| Dimensions | 371mm x 121mm x 40mm |
| Weight | 0.7kg |
| Keycup Printing | Dye-sublimation (for compatible keycaps) |
| Keycup Material | PBT plastic (for compatible keycaps) |
| Application | Desktop, Laptop, Tablet |

8. User Tips
- **Sound Customization:** The gasket mount and various foam layers (Poron, IXPE, PE film, sponge) are designed for a pleasant typing sound. Experiment with different switches to find your preferred acoustic profile.
- **VIA Software:** Take the time to explore the VIA software. Customizing keybinds and macros can significantly enhance your workflow and gaming experience.
- **Battery Life:** To maximize battery life in wireless modes, consider turning off RGB lighting when not needed or reducing its brightness.
9. Warranty and Support
For warranty information and technical support, please refer to the seller's official store page or contact their customer service directly. Keep your purchase receipt as proof of purchase.