TBS FUSION 5.8G Dual Receiver Module

Contents

FPV TBS FUSION 5.8G Dual Receiver Module

Instruction Manual

1. Introduction

The TBS Fusion 5.8G Dual Receiver Module is an enhanced analog video receiver module designed for FPV (First Person View) applications. It features OSD (On-Screen Display) overlay capabilities and seamless integration with TBS Crossfire systems.

TBS Fusion Enhanced Video Module in its protective case.
TBS Fusion Enhanced Video Module in its protective case.

Through active video fusion technology, the module significantly reduces video breakup and extends range without color deterioration or video desync, which are common issues at the edge of reception. Its advanced OSD engine provides cutting-edge interactivity, minimizing the need for external OSD solutions. The TBS Fusion elevates reception quality and facilitates system-wide integration with TBS Crossfire and other compatible devices.

Explanation of active video fusion technology for improved range and reduced breakup.
Explanation of active video fusion technology for improved range and reduced breakup.

This module is the result of a collaborative effort: BrainFPV developed the video fusion, AchillesFPV designed the OSD and UI, and TBS handled the hardware engineering and manufacturing. This collaboration ensures optimal performance in merging two analog video streams.

2. Setup

Follow these steps to set up your TBS Fusion module:

  1. Unboxing: Carefully remove the TBS Fusion module and any included accessories from its packaging.
  2. Goggle Compatibility: The TBS Fusion module is compatible with Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, and HDO goggles.
  3. Installation into Goggles:
    • Insert the TBS Fusion module into the designated module bay of your FPV goggles.
    • For Fatshark Attitude goggles, trimming of the goggle plastic case may be required to ensure a proper fit.
  4. Antenna Connection: Connect your preferred 5.8G FPV antennas to the module's antenna connectors.
  5. External Power Kit: An External Power Kit is included. This kit is required for older goggle models that cannot deliver sufficient power to the module, or for specific connectivity requirements. Connect it as per your goggle's instructions if needed.
Information on the included External Power Kit for older goggles or connectivity.
The External Power Kit is included and may be necessary for older goggles or specific connectivity needs.

3. Operating Instructions

The TBS Fusion module offers advanced features for an enhanced FPV experience:

  • Power On: Once installed, power on your FPV goggles. The TBS Fusion module should initialize and display its OSD.
  • Channel Selection: Use the controls on your goggles or the module itself to select the desired 5.8G video channel.
  • Crossfire Integration: The module is designed for seamless integration with TBS Crossfire radio links. This allows for synchronized VRx/VTX channel changes and the ability to modify CRSF device settings directly via your goggles. This includes compatibility with Crossfire, Unify Pro/Pro32, and compatible Flight Controllers.
  • Special Modes: The TBS Fusion includes a lap timer and spectator modes, which are beneficial for freestyle flying and race events.
Description of Crossfire integration benefits and future compatibility.
Crossfire integration provides synchronized VRx/VTX channel changes and in-goggle device setting modification.

Video Demonstration

Demonstration of the TBS Fusion module's integration and functionality within an FPV system.

4. Maintenance

To ensure the longevity and optimal performance of your TBS Fusion module, consider the following maintenance tips:

  • Cleaning: Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners directly on the module.
  • Storage: Store the module in a dry, cool place away from direct sunlight and extreme temperatures when not in use. The included protective case is ideal for storage.
  • Antenna Care: Handle antennas carefully to avoid bending or damaging the connectors.
  • Firmware Updates: Regularly check for and apply firmware updates using TBS Agent X V2.0.21 or higher to ensure you have the latest features and performance improvements.
Firmware upgrade requirement using TBS Agent X V2.0.21 or higher.
Firmware upgrades are performed using TBS Agent X V2.0.21 or higher.

5. Troubleshooting

If you encounter issues with your TBS Fusion module, try the following steps:

  • No Video Signal:
    • Ensure all connections (module to goggles, antennas) are secure.
    • Verify that your FPV transmitter (VTX) is powered on and transmitting on the correct frequency/channel.
    • Check that the module's channel matches the VTX channel.
    • Confirm that your goggles are receiving power.
  • Poor Video Quality/Breakup:
    • Check antenna condition and ensure they are properly oriented.
    • Try different antenna types (e.g., omnidirectional vs. directional) if available.
    • Ensure there are no major obstructions between your drone and goggles.
    • Minimize interference from other 5.8Ghz devices in the area.
    • Verify the module is receiving adequate power, especially if using an older goggle model that might require the external power kit.
  • Module Not Powering On:
    • Ensure the module is correctly seated in the goggle bay.
    • Check goggle power supply.
    • If using the external power kit, ensure it is correctly connected and providing power.
  • Crossfire Integration Issues:
    • Ensure both your Crossfire system and the TBS Fusion module have the latest firmware.
    • Refer to the TBS Crossfire manual for specific integration steps and troubleshooting.

6. Specifications

Dimensions of the TBS Fusion module (70mm x 61.8mm x 31mm).
Dimensions of the TBS Fusion module (70mm x 61.8mm x 31mm).
Product Specifications
Feature Detail
RF Sensitivity -96dBm
Power Input 5V @ 340mA (500mAh with connectivity enabled)
Material Composite Material
Origin Mainland China
Recommended Age 14+ years
Use Vehicles & Remote Control Toys
Compatibility Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO
Firmware Upgrade TBS Agent X V2.0.21 or higher
Package Length 21 cm
Package Width 3 cm
Package Height 1 cm
Package Weight 0.5 kg

7. User Tips

  • Check Goggle Compatibility: Always double-check the compatibility of the TBS Fusion module with your specific FPV goggle model before purchase and installation. Some models, like Fatshark Attitude, may require physical modification (trimming) of the goggle case for a proper fit.
  • Firmware Updates are Key: Keep your module's firmware updated using TBS Agent X. This ensures you benefit from the latest performance enhancements, bug fixes, and compatibility with other TBS products.
  • Antenna Quality Matters: The performance of your video reception is heavily influenced by the quality and type of antennas you use. Experiment with different 5.8G antennas to find the best setup for your flying environment.
  • External Power for Older Goggles: If you experience unstable performance or power issues with older Fatshark goggles, ensure you are utilizing the included External Power Kit to provide adequate power to the Fusion module.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

© 2023 TBS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.