A-BF RX-F500

Contents

A-BF RX-F500 Thermal Imager Analyzer User Manual

Model: RX-F500 | Brand: A-BF

1. Introduction

The A-BF RX-F500 Thermal Imager Analyzer is a sophisticated PCBA infrared thermal imaging analysis system designed for detailed inspection and troubleshooting of circuit boards. This system allows for online data collection, identification of short-circuit points, detection of leakage elements, and assessment of circuit board structural integrity. It is an essential tool for professionals in industrial and electronics repair, offering advanced thermal analysis capabilities.

A-BF RX-F500 Thermal Imager Analyzer with key features listed: Temperature range -20°C to 600°C, Infrared Resolution 256x192 Pixels, Take Videos & Photos, PC Software Analysis.

Figure 1: A-BF RX-F500 Thermal Imager Analyzer overview.

2. Package Contents

Please verify that all items are present in your package:

  • 1 x Thermal Imager Analyzer
  • 1 x Bracket
  • 1 x User Manual
  • 1 x Data cable (USB Type C)
  • 1 x Box
  • 1 x Macro Lens (Optional, may be included depending on purchase)
  • 1 x U disk (containing PC software)
Packaging details and product dimensions: 270mm x 205mm x 94mm for the box, and the assembled device dimensions. Also includes a product specification table.

Figure 2: Packaging details and included components.

3. Setup Instructions

Follow these steps to set up your A-BF RX-F500 Thermal Imager Analyzer:

  1. Assemble the Bracket: Securely attach the thermal imager to the provided bracket. The bracket allows for flexible adjustment and rotation.
  2. Connect to PC: Use the supplied USB Type C data cable to connect the thermal imager to your computer.
  3. Install Software: The PC software is located on the included U disk. Insert the U disk into your computer and install the "ThermalAnalysisSystem.exe" and related files. It is recommended to use Windows 10 or Windows 11 for optimal performance.
  4. Power On: After connecting, press the power button on the top of the thermal imager. The infrared thermal image should appear on the software interface.
  5. Install Macro Lens (Optional): If you have the optional 30mm macro lens, gently screw it onto the thermal imager's camera for enhanced detail. This lens helps in clearly distinguishing devices or pins as small as 0.3mm.

Video 1: Product unboxing, assembly, and initial PC connection demonstration.

Laptop connected to the thermal imager, showing the PC application with a thermal image on screen. Text indicates 'PC Application One-click Startup'.

Figure 3: Connecting the thermal imager to a PC for software analysis.

Diagram showing the optional 30mm macro lens and a comparison of thermal images with and without the macro lens installed, highlighting increased detail with the lens.

Figure 4: Optional 30mm Macro Lens for detailed inspection.

4. Operating Instructions

4.1 PC Software Overview

The A-BF RX-F500 utilizes a professional PC software for comprehensive thermal analysis. The software supports various display modes, image editing, and data analysis features.

Screenshot of the software interface with various functions highlighted: 3D mode effect, contrast mode, capture/save pictures, record images/data, various temperature measurement modes, track maximum temperature, alerts, detailed viewing within rectangle, quickly view highest temperature area.

Figure 5: Software Function Introduction.

4.2 Temperature Measurement and Analysis

  • Temperature Range: The device supports a wide temperature measurement range of -20°C to +600°C (-4°F to +1112°F).
  • High Temperature Alarm: Users can set a custom high temperature alarm threshold. When this threshold is exceeded, the software will trigger an alarm, and the picture frame will flash red.
  • Multiple Color Palettes: The software offers 5 different color palette effects (e.g., Iron Red, Peacock, Rainbow, Summer, Desert) to suit various analysis scenarios and improve visualization.
Screenshot showing different color palettes applied to a thermal image of a circuit board, including Iron Red, Peacock, Rainbow, Summer, and Desert.

Figure 6: Multiple Color Palette options for thermal visualization.

4.3 Advanced Analysis Modes

  • 3D Thermal Field Distribution: This mode provides a multi-dimensional observation of heat sink design and temperature changes, offering an intuitive 3D visualization of the thermal field. This is particularly useful for industrial and electronics applications.
Screenshot of the software displaying a 3D thermal field distribution of a circuit board, showing temperature changes in a multi-dimensional view.

Figure 7: 3D Thermal Field Distribution for intuitive temperature changes.

  • Rectangular Analysis Mode: This mode allows for detailed comparison and inspection of image color changes within specific areas. It can display a temperature curve within a selected frame, facilitating the review of historical temperature data.
Screenshot of the software in Rectangular Analysis Mode, showing a thermal image with a selected rectangular area and a corresponding temperature curve graph below it, illustrating merged curve analysis and differentiation curve analysis.

Figure 8: Rectangular Analysis Mode with temperature curves.

  • Double Board Comparison Mode: This feature enables the comparison of a known good circuit board with a faulty one. By placing both boards on either side of a dividing line, comparative analysis under identical conditions can quickly pinpoint faults.
Screenshot of the software in Double Board Comparison Mode, showing two thermal images side-by-side for comparative analysis, labeled 'The left side is the abnormal screen' and 'The right side is the normal screen'.

Figure 9: Double Board Comparison Mode for fault location.

4.4 Fast Fault Location

The RX-F500 is designed for fast current leakage inspection and short-circuit identification. It can detect current leakage as low as 6mA, quickly locating high-temperature areas and abnormally hot components, helping to rule out complex bugs efficiently.

Thermal image of a circuit board highlighting hot spots, with text 'Fast Current Leakage Inspection Short circuit Identification, Complex Bugs Rule Out'.

Figure 10: Fast current leakage inspection.

5. Maintenance

To ensure the longevity and optimal performance of your A-BF RX-F500 Thermal Imager Analyzer, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners or solvents that could damage the lens or casing.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Software Updates: Periodically check for software updates from the manufacturer to ensure you have the latest features and bug fixes.

6. Troubleshooting

If you encounter issues with your A-BF RX-F500, please refer to the following common troubleshooting steps:

  • Software Not Launching/Connecting:
  • Ensure the USB cable is securely connected to both the thermal imager and the PC.
  • Verify that the PC software has been correctly installed from the U disk.
  • Confirm your operating system is Windows 10 or 11, as other versions may have compatibility issues.
  • Restart the software and/or your computer.
  • No Thermal Image Display:
  • Check if the device is powered on (press the power button on top).
  • Ensure the software is running and the camera is selected as the input source.
  • Inaccurate Temperature Readings:
  • Ensure the measurement distance is within the recommended 30mm-150mm range.
  • Check for any obstructions between the camera and the target.

For further assistance, please contact A-BF customer support.

7. Specifications

FeatureSpecification
ModelRX-F500
Thermal Pixels / Resolution256*192 pixels
Refresh Rate25Hz
Temperature Measurement Range-20°C ~ +600°C (-4°F ~ +1112°F)
FOV (Field of View)56°x42°
Measurement Distance30mm - 150mm
InterfaceUSB Type C
Input VoltageDC 5V
Storage Temperature-20°C ~ 60°C
Working Temperature0°C ~ 50°C
Humidity95% relative humidity
Storage Format (Pictures)JPG
Storage Format (Videos)MP4
Battery IncludedNo
High-concerned chemicalNone
Is Smart DeviceYes
StyleWall Hanging
OriginMainland China
Display Size1.9 Inches & Under
CertificationCE, FCC

8. User Tips

  • Always install the PC software from the provided U disk before connecting the device to ensure proper driver and software functionality.
  • For highly detailed inspections of small components (e.g., 0.3mm pins), consider using the optional 30mm macro lens.
  • Utilize the various color palettes to enhance visibility and contrast for different thermal patterns.
  • The 3D thermal field distribution is excellent for visualizing heat flow and identifying potential design flaws in heat dissipation.
  • When comparing circuit boards, ensure both the 'good' and 'bad' boards are under the same environmental and operational conditions for accurate analysis.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the A-BF Official Store directly. Keep your purchase records handy for faster service.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.