Geko Online Account Login Service

Contents

Geko ODIS Online Account Login Service User Manual

For VW, Audi, Skoda, Seat, and Bentley Vehicles

1. Introduction

This manual provides essential information and instructions for utilizing the Geko ODIS online account login service. This service offers remote access to the ODIS diagnostic system, enabling advanced functions such as IMMO coding, SVM (Software Version Management), and component protection for a range of Volkswagen Group (VAG) vehicles, including VW, Audi, Skoda, Seat, and Bentley.

The service operates by providing a one-time login credential via remote desktop software (TeamViewer), allowing the user to perform necessary programming and diagnostic tasks directly. Please read this manual thoroughly before proceeding with the service.

2. Setup Requirements

Before initiating the online login service, ensure the following prerequisites are met:

  • ODIS Software: You must have the ODIS diagnostic software installed on your computer.
  • ODIS Version Compatibility: It is crucial to confirm if your specific ODIS version supports online login. Contact customer service before making any payment to verify compatibility.
  • Remote Access Software: TeamViewer must be installed and operational on your computer to allow the engineer remote access for login.
  • Vehicle Connection: Ensure your diagnostic tool is correctly connected to the vehicle, and the ODIS software is ready for operation in the login window.
  • Stable Internet Connection: A reliable and stable internet connection is essential for uninterrupted remote access and online programming.
  • Vehicle Battery: Ensure the vehicle's battery is adequately charged or connected to a power stabilizer to prevent voltage drops during programming.
Geko ODIS Online Account Login Screen
Figure 1: Example of the Geko ODIS online account login screen, indicating fast and stable access for VW, Audi, Skoda, Seat, and Bentley.
Laptop screen showing ODIS login for Audi
Figure 2: A laptop displaying the ODIS login interface, specifically for an Audi vehicle.

3. Operating Instructions

Follow these steps to utilize the Geko ODIS online account login service:

  1. Pre-Service Contact: Before making any payment, contact customer service to confirm your ODIS version's compatibility with the online support.
  2. Prepare Your System: Ensure your computer has ODIS software installed, TeamViewer is ready, and your diagnostic tool is connected to the vehicle. The ODIS software should be open to the login window.
  3. Initiate Remote Session: During the engineer's working hours (9:30 AM - 10:30 PM Beijing time, China), contact customer service to arrange the remote login.
  4. Engineer Login: An engineer will remotely access your computer via TeamViewer to input the username and password for the ODIS online server.
  5. Perform Programming/Coding: Once logged in, you are responsible for performing the necessary coding, IMMO programming, SVM, or component protection tasks yourself.
  6. Confirm Service: After successful login, please confirm the receipt of goods/service as per the platform's instructions.
ODIS screen showing Programming Services for VAG brands
Figure 3: ODIS interface indicating "Programming Services" for VW, Audi, Skoda, Seat, and Bentley, with TeamViewer active in the background.
ODIS screen showing component protection for instrument cluster
Figure 4: ODIS screen displaying the process of "Component protection for instrument cluster" with a "Please wait, data is being read..." message.
ODIS screen showing online connection setup for gateway control module
Figure 5: ODIS screen illustrating the "Adapting component protection Gateway" and "Online-connection set-up" process, where data is read from the gateway control module.
ODIS screen showing coding and SVM for Adaptive Cruise Control
Figure 6: ODIS screen detailing "coding and svm" for the "Control Module for Adaptive Cruise Control, Software configuration".
ODIS screen showing anti-theft immobilizer adaptation
Figure 7: ODIS screen showing the "Adapt anti-theft immobilizer 5" process, including evaluation of login/release status for various control modules.

4. Limitations and Important Notes

Please be aware of the following critical points regarding this service:

  • One-Time Service: Each purchase provides a one-time online login service. It does not include ongoing access or multiple logins.
  • User Responsibility for Programming: The service provider is solely responsible for providing a successful login to the ODIS server. The success or failure of subsequent programming, coding, or diagnostic tasks performed by the user is not the responsibility of the service provider.
  • No Refunds for Programming Failure: Refunds will not be issued if programming fails due to factors such as incompatible or damaged vehicle parts, incorrect user operation, or issues unrelated to the login process itself.
  • Prohibited Uses: This service must not be used for:
    • Modifications of vehicles that are not legally compliant.
    • Matching illegal parts.
    • Modifying vehicles where the diagnostic tool is not authorized or allowed.

5. Service Specifications

FeatureDetail
Service TypeOnline Account Login for ODIS Diagnostic System
Supported Vehicle BrandsVW, Audi, Skoda, Seat, Bentley (VAG Group)
Key Functions EnabledIMMO Coding, SVM, Component Protection, Online Coding
Access MethodRemote via TeamViewer
Service DurationOne-time login per purchase
Working Hours (Beijing Time)9:30 AM - 10:30 PM (China Standard Time)
ODIS screen showing successful component protection activation
Figure 8: ODIS screen confirming successful activation of a component, specifically the Climatronic Control Module, and indicating "Component protection".
ODIS screen showing successful Central Module Comfort System activation
Figure 9: ODIS screen confirming successful activation of the Central Module Comfort System component.
ODIS screen in Spanish showing data transfer
Figure 10: ODIS screen (in Spanish) displaying a message "Espera, por favor. Se están enviando los datos..." which translates to "Please wait. Data is being sent...", indicating a data transfer process.

6. Troubleshooting

If you encounter issues while using the service, consider the following:

  • Login Issues:
    • Ensure your internet connection is stable.
    • Verify that TeamViewer is correctly installed and running.
    • Confirm you are contacting customer service during their specified working hours.
    • Double-check that your ODIS version has been confirmed as compatible with the online login service.
  • Programming/Coding Failure:
    • Part Compatibility: The most common reason for programming failure is that the purchased or replaced parts are not compatible with the vehicle. Always ensure parts are genuine and compatible.
    • Damaged Parts: If the parts themselves are damaged, programming will likely fail. Inspect parts thoroughly before installation.
    • Incorrect Procedure: Ensure you are following the correct ODIS programming procedure for the specific task.
    • Vehicle Power: Verify the vehicle's battery voltage remained stable throughout the process.
  • Communication Issues: If you have questions before purchasing or during the process, ensure you are communicating clearly with customer service and allow sufficient time for a response, especially considering time zone differences.

7. User Tips

  • Pre-Purchase Inquiry: Always contact customer service to confirm ODIS version compatibility before making a payment. This prevents potential issues and ensures the service will work for your setup.
  • Understand Service Scope: Remember this is a one-time login service. The responsibility for the actual coding and programming success lies with the user, assuming the login itself is successful.
  • Prepare Thoroughly: Have all your tools, software, and vehicle connections ready and tested before contacting for remote login. A stable internet connection is paramount.
  • Time Zone Awareness: Be mindful of the working hours (9:30 AM - 10:30 PM Beijing time, China) when seeking remote assistance.

8. Support

For any inquiries, technical assistance, or to confirm ODIS version compatibility, please contact customer service. They can also provide information on paid programming services if you require assistance with the actual coding process.

Customer Service Working Hours: 9:30 AM - 10:30 PM (Beijing time, China)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.