VRIG TP-06 & TP-08 Tripod Stand Selfie Stick User Manual

1. Introduction

Thank you for choosing the VRIG TP-06 or TP-08 Tripod Stand Selfie Stick. This versatile accessory is designed to enhance your photography and videography experience, functioning as both a handheld extendable selfie stick and a stable desktop tripod. It features a 360° rotatable ball head and a cold shoe mount for additional accessories. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Figure 1: VRIG TP-06 Tripod Stand Selfie Stick

2. Safety Information

• Do not exceed the maximum load capacity of 1.5kg to prevent damage to the tripod and attached devices.
• Ensure all locking mechanisms are securely fastened before use, especially when extending the stick or adjusting the angle.
• Keep the product away from extreme temperatures, water, and corrosive substances.
• Avoid dropping or subjecting the product to strong impacts.

3. Package Contents

• 1 x VRIG Tripod Stand Selfie Stick (TP-06 or TP-08 model)

4. Setup

4.1 Unfolding the Tripod Legs

1. Hold the main body of the tripod.
2. Gently spread the three legs outwards until they are fully extended and stable on a flat surface.

4.2 Extending the Selfie Stick

1. Locate the telescoping tube sections.
2. Pull each section upwards to extend the stick to your desired height. Ensure each section is securely locked in place to prevent slipping.

Figure 2: Extension lengths for TP-06 (29cm, 37.5cm, 46cm, 55cm)

4.3 Mounting a Device

For TP-06 (1/4 inch screw connector):

1. Locate the 1/4 inch screw on the top of the ball head.
2. Align your camera or smartphone holder (with a 1/4 inch screw hole) with the screw.
3. Rotate your device clockwise until it is securely fastened. Do not overtighten.

For TP-08 (Sports camera mounting head):

1. Attach your sports camera to the dedicated mounting head.
2. Ensure the camera is firmly secured using its native mounting mechanism.

Figure 3: Product details including 1/4 inch screw and cold shoe mount

4.4 Attaching Accessories (Cold Shoe Mount)

1. The ball head features a side cold shoe mount.
2. Slide your microphone, LED video light, or other compatible accessory into the cold shoe slot until it clicks into place.
3. Ensure the accessory is firmly seated before use.

Figure 4: Attaching a microphone and video light using the cold shoe mount

5. Operating Instructions

5.1 Adjusting the Angle (Ball Head)

1. Loosen the knob base on the ball head.
2. Adjust your device to the desired angle (360° rotation is supported).
3. Tighten the knob base firmly to lock the angle in place.

Figure 5: Metal Ballhead with 360° rotation and 1.5kg load capacity

5.2 Using as a Selfie Stick

1. Ensure the tripod legs are folded together to form a comfortable grip.
2. Extend the stick to your preferred length.
3. Hold the stick firmly and capture your photos or videos.

5.3 Using as a Tripod

1. Unfold the tripod legs and place it on a stable, flat surface.
2. Adjust the height and angle as needed.
3. Ensure the setup is stable before leaving your device unattended.

Figure 6: Various usage scenarios

6. Maintenance

• Clean the tripod with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the tripod in a dry, cool place when not in use.
• Regularly check screws and joints for tightness and re-tighten if necessary.

7. Troubleshooting

7.1 Tripod is unstable or device slips

• Ensure the tripod legs are fully spread and on a flat surface.
• Verify that the device is securely mounted to the 1/4 inch screw or sports camera mount.
• Check that the ball head knob is tightened sufficiently to hold the desired angle.
• Confirm that the weight of your device and accessories does not exceed the 1.5kg load capacity.

7.2 Extension pole does not lock in place

• Ensure each telescoping section is pulled out completely until it engages its locking mechanism.
• Avoid forcing the extension; if it feels stiff, check for any obstructions.

8. Specifications

9. User Tips

• For optimal stability, always ensure the tripod legs are fully extended and placed on a level surface.
• When using the extension pole, make sure each segment is firmly locked to prevent accidental collapse, especially with heavier devices.
• The cold shoe mount is excellent for adding external microphones or LED lights, significantly improving audio and lighting quality for your content.
• Its lightweight and compact design make it ideal for travel; it easily fits into most bags or backpacks.

10. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Retain your purchase receipt as proof of purchase.