K&F CONCEPT MS08

Contents

K&F Concept MS08 2-in-1 Phone Tripod Selfie Stick Instruction Manual

Model: MS08 (KF09.127)

1. Introduction

Thank you for choosing the K&F Concept MS08 2-in-1 Phone Tripod Selfie Stick. This versatile accessory is designed to enhance your photography and videography experience, offering both a stable tripod and an extendable selfie stick. It features a 7-section adjustable height, a 360-degree rotating head, and compatibility with various devices including smartphones, cameras, and GoPro action cameras. Please read this manual carefully before use to ensure proper operation and to maximize the product's potential.

K&F Concept MS08 2-in-1 Phone Tripod Selfie Stick with remote and GoPro adapter

Figure 1: K&F Concept MS08 Product Overview

2. Setup Guide

2.1 Unpacking and Components

Carefully remove all components from the packaging. Ensure you have the following:

  • K&F Concept MS08 Tripod Selfie Stick
  • Bluetooth Remote Control
  • GoPro Adapter

2.2 Deploying the Tripod

  1. Hold the handle firmly.
  2. Gently pull the three legs outwards until they are fully extended and stable. The wider three-legged fixed structure ensures stability.
  3. Place the tripod on a flat, stable surface.
Wider three-legged fixed structure with non-slip silicone pads

Figure 2: Tripod Legs with Non-Slip Pads

2.3 Adjusting Height

The MS08 features 7 sections for height adjustment. To extend, simply pull the pole upwards. To retract, push it downwards. Ensure each section is securely locked in place for optimal stability. The maximum extended length is 157.8cm (62 inches).

Diagram showing 7 levels of height adjustment up to 157.8cm/62 inches

Figure 3: Height Adjustment Levels

2.4 Attaching Your Device

The MS08 offers versatile device compatibility:

  • For Cameras (DSLRs, Mirrorless, Video Cameras): Use the standard 1/4-inch screw connector on the top of the ball head. Secure your camera by twisting it onto the screw.
  • For Smartphones: The integrated 2-in-1 phone clip expands to securely hold smartphones between 4.5 and 7.6 inches. Simply pull the top part of the clip upwards to open and insert your phone.
  • For GoPro/Action Cameras: Attach the provided GoPro adapter to the 1/4-inch screw connector, then mount your GoPro or other compatible action camera onto the adapter.
Diagram showing 2-in-1 phone clip design with 1/4 inch screw and GoPro connector

Figure 4: Device Mounting Options

2.5 Pairing the Bluetooth Remote Control

  1. Turn on the Bluetooth remote control by sliding the power switch.
  2. Wait approximately 5 seconds for the LED light to start blinking, indicating it's in pairing mode.
  3. On your smartphone, go to Bluetooth settings and locate 'AB Shutter 3' (or similar name) in the list of available devices.
  4. Select 'AB Shutter 3' to connect. No password is required.
  5. Once connected, the LED light will stop blinking.
Three-step guide to pairing the Bluetooth remote control

Figure 5: Bluetooth Remote Pairing Steps

3. Operating Instructions

3.1 Switching Between Modes

  • Selfie Stick Mode: Keep the tripod legs folded and hold the handle. Extend the pole to your desired length.
  • Tripod Mode: Deploy the tripod legs as described in Section 2.2. Adjust the pole height as needed.

3.2 Adjusting Shooting Angles

The ball head allows for flexible angle adjustments:

  • 360° Panoramic Rotation: Loosen the knob on the ball head to rotate your device horizontally for panoramic shots.
  • 90° Vertical Tilt: Adjust the angle of your device vertically by tilting the ball head. Tighten the knob to secure the desired angle.
Diagram showing 360 degree adjustable head for horizontal, vertical, and elevation shots

Figure 6: Multiple Angle Adjustments

3.3 Using the Bluetooth Remote

Once paired, use the Bluetooth remote control to trigger your device's camera shutter. Press the appropriate button (usually marked with a camera icon) to take photos or start/stop video recording. The remote works effectively within a 10-meter (393-inch) range.

Person using Bluetooth remote to take a selfie with the K&F Concept MS08

Figure 7: Bluetooth Remote in Use

Video 1: K&F Concept MS08 Selfie Stick & Extension Tripod Product Demonstration

4. Maintenance

  • Cleaning: Wipe the tripod and remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, fold the tripod legs and retract the pole to its minimum length. Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Remote Battery: The Bluetooth remote control is powered by a replaceable button cell battery. If the remote stops responding or the LED light does not illuminate, replace the battery. (Battery type typically CR2032, though not specified, it's common for such remotes).

5. Troubleshooting

  • Bluetooth Remote Not Connecting:
    • Ensure the remote is turned on and within the 10-meter range.
    • Check the remote's battery. Replace if necessary.
    • Turn off and on your phone's Bluetooth, then try pairing again.
    • Forget the device ('AB Shutter 3') in your phone's Bluetooth settings and re-pair from scratch.
  • Tripod Instability:
    • Ensure all 7 sections of the pole are fully extended and securely locked.
    • Verify that the tripod legs are fully spread and placed on a flat, stable surface.
    • Check that the weight of your device does not exceed the maximum load capacity of 2kg (4.4lbs).
  • Device Not Fitting:
    • Smartphones: Ensure your smartphone size is between 4.5 and 7.6 inches for the phone clip.
    • Cameras: Confirm your camera has a standard 1/4-inch tripod screw mount.
    • Action Cameras: Ensure you are using the provided GoPro adapter for compatible action cameras.

6. Specifications

FeatureSpecification
Model NumberMS08 (KF09.127)
MaterialAluminum Alloy (main body), Plastic (feet with non-slip silicone pads)
Max Extended Length1570mm / 62.1 inches
Folded Length328mm / 12.9 inches
Weight398g / 0.88 lbs
Load Capacity2kg / 4.4 lbs
Center Column Sections7
Leg Lock TypeTwist Lock
Head Rotation360° Horizontal, 90° Vertical
Smartphone Compatibility4.5 - 7.6 inch screen size
Bluetooth Remote RangeUp to 10 meters / 393 inches
Adapter CompatibilityGoPro, DJI Osmo Action, Insta 360 (with adapter)

7. User Tips

  • Stability Check: Always ensure the tripod legs are fully extended and the pole sections are locked before mounting your device, especially when using it at maximum height.
  • Weight Distribution: When using heavier cameras, try to keep the center of gravity over the tripod base for maximum stability.
  • Remote Battery Life: The Bluetooth remote can work continuously for up to 10 hours. Carry a spare battery (CR2032 is a common type) for extended shooting sessions.
  • Feet Material: The tripod feet are made of durable plastic with non-slip silicone pads, providing good grip on various surfaces. The main pole is constructed from aluminum alloy for lightweight strength.
  • Versatile Use: Don't limit yourself to just selfies! Experiment with different angles and heights for vlogging, time-lapses, group photos, and stable video recording on a desktop.

8. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the K&F Concept customer service or your original point of purchase. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.