Introduction
Thank you for choosing the HEDELI XHP90 LED Tactical Flashlight. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new flashlight. Please read it thoroughly before use.
The HEDELI XHP90 LED Tactical Flashlight features the latest XHP90 wick, offering a brighter, whiter, and more energy-efficient light compared to older models. With a built-in 3000 mAh battery, it provides extended usage. Its lightweight and portable design makes it ideal for outdoor activities such as camping, night riding, and hunting.
Package Contents
- 1 x HEDELI XHP90 LED Tactical Flashlight
- 1 x USB Charging Cable
- 1 x Storage Box
Specifications
| Feature | Detail |
|---|---|
| Bulb Type | XHP90 LED (latest updated version) |
| Power | 10 Watts |
| Battery | Built-in 3000mAh rechargeable battery |
| Working Hours | 8-10 hours (depending on mode) |
| Charging Time | 2-3 hours |
| Lumen Output | Up to 3000lm |
| Body Material | ABS |
| Main Light Modes | High Light, Low Light, Stroboscopic |
| COB Light Modes | White Strong Light, White Low Light, Red Strong Light, Red SOS |
| Battery Indicator | Blue LED (100%-75%-25%-0%) |
| Functions | Shock Resistant, Self Defense, Power Bank, Hard Light |
| Focal Length | Adjustable (Zoomable) |
| Waterproof Level | IPX7 (Rainproof, Snowproof, Dirtproof, Shockproof) |
| Lighting Distance | 200-500 meters |
| Dimensions | Length: 16.4 cm (6.46 in), Head Diameter: 4 cm (1.57 in) |
| Certifications | CCC, CE, CQC, EMC, FCC, GS, LVD |
Setup
Initial Charge
- Before first use, fully charge the flashlight.
- Connect the provided USB charging cable to the flashlight's charging port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., wall adapter, computer, power bank).
- The blue LED battery indicator lights will illuminate to show charging progress. All four lights will be solid when fully charged.
- Charging typically takes 2-3 hours.
Operating Instructions
Power On/Off and Main Light Modes
- Power Button: Locate the power button on the side of the flashlight.
- Turn On: Press the power button once to turn on the flashlight in High Light mode.
- Cycle Modes: With the flashlight on, press the power button repeatedly to cycle through the main light modes: High Light → Low Light → Stroboscopic.
- Turn Off: Press the power button after cycling through all modes, or hold the button down for a few seconds to turn off the flashlight from any mode.
COB Side Light Modes
- Activate COB Modes: Quickly double-click the power switch to activate the COB side light. It will start in White Strong Light mode.
- Cycle COB Modes: With the COB light on, press the power button repeatedly to cycle through the COB modes: White Strong Light → White Low Light → Red Strong Light → Red SOS.
- Turn Off COB Light: Press the power button after cycling through all COB modes, or hold the button down for a few seconds.
Zoom Function
- The flashlight features an adjustable focal length.
- To Zoom In (Spotlight): Gently pull the head of the flashlight forward to narrow the beam for long-distance, focused illumination.
- To Zoom Out (Floodlight): Push the head of the flashlight backward to widen the beam for broad area lighting.
Power Bank Function
- The flashlight can be used to charge other USB-powered devices.
- Locate the output USB port (usually covered by a rubber flap) on the flashlight.
- Connect your device's charging cable to this output port.
- The flashlight will begin charging your device.
Battery Indicator
- The blue LED lights near the power button indicate the remaining battery charge:
- 4 lights: 100% - 75%
- 3 lights: 75% - 50%
- 2 lights: 50% - 25%
- 1 light: Below 25% (Recharge soon)
Maintenance
- Cleaning: Wipe the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Charging: Recharge the battery regularly, even if not in frequent use, to prolong battery life. Avoid completely draining the battery before recharging.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50-75%).
- Water Resistance: While IPX7 waterproof, ensure the USB port cover is securely closed before exposing the flashlight to water or moisture.
- Heat: The flashlight head may become warm during prolonged use on high settings. This is normal. Avoid touching the head directly when hot.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Low battery. | Charge the flashlight fully. |
| Light is dim. | Low battery. | Recharge the flashlight. |
| Cannot switch to COB modes. | Incorrect button press. | Quickly double-click the power button to activate COB modes. |
| Flashlight not charging external devices. | Flashlight battery too low; incorrect port used. | Ensure flashlight is sufficiently charged. Use the correct output USB port. |
| Zoom function is stiff. | Dirt or debris in the mechanism. | Clean the flashlight head and zoom mechanism gently. Avoid forcing it. |
User Tips
- To quickly access the COB side light modes, remember to double-click the power switch. This is useful for close-range work or as a warning light.
- Always keep an eye on the blue battery indicator lights. Recharging before the battery is completely depleted can help extend its overall lifespan.
- Experiment with the zoom function to find the optimal beam for your activity. A wide floodlight is great for general area illumination, while a focused spotlight is best for long-distance viewing.
- When using the flashlight as a power bank, ensure the flashlight itself has ample charge to avoid running out of light when you need it most.
- For emergency situations, the Red SOS COB mode can be a critical signaling tool.
Warranty and Support
For any questions, issues, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty validation.
This product is certified with CCC, CE, CQC, EMC, FCC, GS, and LVD standards, ensuring quality and safety.
