Feyree EV Charger Adapter Type 2 IEC 62196-2 to GB/T Converter

Contents

Feyree EV Charger Adapter Type 2 IEC 62196-2 to GB/T Converter

Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Feyree EV Charger Adapter. This adapter is designed to enable electric vehicles with a GB/T charging port to utilize charging stations equipped with a Type 2 (IEC 62196-2) connector. Please read this manual thoroughly before using the product.

2. Product Overview

The Feyree EV Charger Adapter acts as a bridge between Type 2 charging infrastructure and GB/T compatible electric vehicles. It is compact and designed for ease of use and portability.

Feyree EV Charger Adapter showing Type 2 and GB/T connectors

Figure 1: Feyree EV Charger Adapter connecting Type 2 to GB/T.

The adapter is available in different power configurations:

  • 1-Phase (1P) Adapter: Supports 16A/32A, up to 7KW charging.
  • 3-Phase (3P) Adapter: Supports 16A/32A, up to 22KW charging.
Feyree 1-Phase EV Charger Adapter

Figure 2: 1-Phase Adapter (1P)

Feyree 3-Phase EV Charger Adapter

Figure 3: 3-Phase Adapter (3P)

Video 1: Demonstration of connecting the Feyree EV Charger Adapter.

3. Specifications

Detailed specifications table for Feyree EV Charger Adapter

Figure 4: Detailed product specifications.

FeatureSpecification
Rated Current16A / 32A (Single/Three Phase)
Rated Voltage0V ~ 450V
Power (W)7KW / 22KW
StandardGB/T 20234, IEC 62196
Inflammability RatingUL94 V-0
Insulation Resistance≥500MΩ (DC500V)
Contact Resistance0.5mΩ Max
Mating and Un-mating Force45N < F < 80N
Mechanical Life (Normal use)>10000 Times
Working Temperature-35°C ~ +55°C
Shell MaterialThermoplastic
Connector Pin MaterialCopper Alloy, Silver Plating
IP RatingIP55
Dimensions (L x W x H)8cm x 8cm x 19cm
Weight0.5kg

4. Setup

Before connecting the adapter, ensure both the charging station and your electric vehicle are turned off and in a safe state for connection.

  1. Take the Type 2 charging cable from the charging station.
  2. Insert the Type 2 end of the charging cable into the Type 2 port of the Feyree adapter. Ensure it clicks securely into place.
  3. Open the charging port cover on your GB/T compatible electric vehicle.
  4. Insert the GB/T end of the Feyree adapter into your vehicle's charging port. Ensure a firm connection.
Diagram showing connection of Type 2 charger to adapter and then to EV

Figure 5: Connection diagram for the EV Charger Adapter.

5. Operating Instructions

Once the adapter is securely connected to both the charging cable and your vehicle:

  1. Initiate the charging process from the charging station according to its specific instructions.
  2. Monitor the charging status on your vehicle's dashboard or the charging station's display.
  3. To disconnect, first stop the charging process from the charging station.
  4. Press the release button on the adapter (if applicable) and carefully remove it from your vehicle's charging port.
  5. Then, disconnect the Type 2 cable from the adapter.

6. Maintenance

  • Keep the adapter clean and free from dust and debris. Use a dry cloth for cleaning.
  • Store the adapter in a dry place, away from direct sunlight and extreme temperatures, when not in use.
  • Ensure the protective caps are in place over the connectors when stored to prevent damage and contamination.
  • Regularly inspect the adapter for any signs of wear, damage, or corrosion. Do not use if damaged.

7. Troubleshooting

  • Adapter not fitting: Ensure you are connecting a Type 2 (IEC 62196-2) charger to the adapter's Type 2 port, and the adapter's GB/T end to a GB/T compatible vehicle. The adapter is designed for Type 2 to GB/T conversion only.
  • Charging not initiating: Verify all connections are secure and fully inserted. Check the charging station for error messages or status indicators. Ensure your vehicle is ready to accept a charge.
  • Slow charging speed: The adapter supports up to 7KW (1-Phase) or 22KW (3-Phase). Actual charging speed depends on the charging station's output, your vehicle's maximum charging rate, and the specific adapter model you are using.
  • Water exposure: The adapter has an IP55 rating, protecting it from water sprays. However, it is not recommended for use outdoors during heavy rain to prevent potential issues.

8. User Tips

  • This adapter is compact and designed without an integrated cable, making it easy to carry and store in your vehicle.
  • Always confirm the charging standard of the station and your vehicle before attempting to connect. This adapter is specifically for Type 2 to GB/T conversion.
  • While the adapter is water-resistant (IP55), avoid prolonged exposure to heavy rain or submerging it in water.

9. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.