ASYPDZSW A32

Contents

ASYPDZSW A32 HIFI Ultra-low Noise Linear Power Supply User Manual

Model: A32

1. Introduction

The ASYPDZSW A32 is a high-performance, ultra-low noise linear power supply designed to enhance the audio quality of various electronic devices. It features a TL431+ high-power transistor discrete voltage regulator circuit, high-speed low-resistance array capacitor layout, and a 3-level filtering system (first-level EMI, second-level capacitor array, and third-level CLC) to minimize output ripple.

This power supply is ideal for upgrading audio equipment, digital devices, NAS hard disk boxes, mobile hard disk boxes, CAS systems, wireless routers, optical fiber modules, set-top boxes, MAC mini, PC HiFi setups, and various portable computers.

Important Note:

The A32 unit provides a single voltage output across its two DC output ports. It cannot supply two different voltages simultaneously. If your application requires two distinct and independent output voltages, please consider the A32-II model.

ASYPDZSW A32 Black Panel Unit

Figure 1: A32 Ultra-low Noise Linear Power Supply (Black Panel)

ASYPDZSW A32 Silver Panel Unit

Figure 2: A32 Ultra-low Noise Linear Power Supply (Silver Panel)

2. Setup

2.1 Unpacking

Carefully remove the A32 power supply from its packaging. Inspect the unit for any signs of damage. Ensure all included accessories are present:

  • A32 HIFI Ultra-low Noise Linear Power Supply (x1)
  • 1.2M GX16-2 PIN to 5.5*2.5mm DC output cable (compatible with 2.1mm) (x2)

Note: An AC input power cable is not included and must be supplied by the user.

2.2 Safety Precautions

  • Always ensure the preamplifier volume is set to minimum before powering on any connected audio equipment to prevent sudden loud noises or potential speaker damage.
  • Strictly adhere to the specified turn-on and turn-off sequences to protect your audio equipment and ensure stable operation.
  • Ensure the selected AC input voltage (115V or 230V) matches your local mains supply.

2.3 Connections

Refer to the rear panel diagram for connection points:

Rear Panel Connections of A32 Power Supply

Figure 3: Rear Panel Connections

  1. AC INPUT: Connect your AC power cable to the IEC AC socket. This socket includes a fuse for protection.
  2. High-current switch: This is the main power switch for the unit.
  3. DC OUTPUT: Connect the provided GX16-2 PIN DC output cables to these ports. The GX16-2 PIN socket polarity is 1+ (Positive) and 2- (Negative). The DC plug (5.5*2.5mm, compatible with 2.1mm) has an internal positive (+) and external negative (-) polarity.
GX16 to 5525 DC Plug Cable Diagram

Figure 4: GX16 to 5525 DC Plug Cable and Polarity

Before connecting to your device, verify that the selected output voltage of the A32 matches the voltage requirements of your device. Incorrect voltage can cause damage.

3. Operating Instructions

3.1 Turn-on Sequence

To ensure proper operation and protect your equipment, follow this sequence when powering on:

  1. Turn on your audio source device (e.g., CD player, MP3 player, PC, digital player).
  2. Turn on your preamplifier, ensuring its volume is set to the minimum level.
  3. Turn on the A32 power supply using the high-current switch on the rear panel.
  4. Turn on your power amplifier.

3.2 Turn-off Sequence

To power down your system safely, follow this sequence:

  1. Turn off your power amplifier.
  2. Turn off your preamplifier.
  3. Turn off the A32 power supply using the high-current switch.
  4. Turn off your audio source device.

4. Maintenance

The ASYPDZSW A32 power supply requires minimal maintenance.

  • Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or abrasive materials.
  • Ventilation: Ensure the unit has adequate ventilation and that the cooling fins are not obstructed.
  • Internal Components: There are no user-serviceable parts inside the unit. Do not open the casing, as this may void your warranty and expose you to electrical hazards.

5. Troubleshooting

If you experience issues with your A32 power supply, try the following steps:

  • No Power:
    • Ensure the AC power cable is securely connected to both the A32 unit and the wall outlet.
    • Check the high-current switch on the rear panel is in the 'ON' position.
    • Verify the AC outlet is functional by plugging in another device.
    • The IEC AC socket contains a fuse. If the unit suddenly stops working, the fuse may need replacement by a qualified technician.
  • No Output Voltage:
    • Confirm the unit is powered on (indicator light, if present).
    • Check that the DC output cables are securely connected to both the A32 and your device.
    • Ensure your connected device is also powered on and functioning correctly.
  • Unusual Noise:
    • Ensure all connections are secure and free from interference.
    • Try connecting the unit to a different AC outlet, preferably on a different circuit.
    • Ensure the A32 is placed away from other devices that might generate electromagnetic interference.

If problems persist, please contact customer support.

6. Specifications

FeatureSpecification
ModelA32
BrandASYPDZSW
MaterialAluminum
Input VoltageAC 115V or 230V (selectable)
Output Power50VA
Output Voltage/Current OptionsDC 5V / 3.5A
DC 9V / 3.5A
DC 12V / 4A
DC 15V / 3.3A
DC 18V / 2.7A
DC 19V / 2.6A
DC 24V / 2A
Control MethodPush button (High-current switch)
GX16-2 PIN Socket Polarity1+ (Positive), 2- (Negative)
DC Plug PolarityInternal +, External-
DC Plug Size5.5*2.5mm (compatible with 2.1mm)
Dimensions (W*H*D)118mm * 50mm * 221mm
WeightApprox. 1.7KG
CertificationsCE, RoHS
Internal View of A32 Power Supply

Figure 5: Internal Components (White OFC Pure copper ring transformer, IEC AC socket with fuse, NJW0302G High current output tube)

7. User Tips

  • Enhanced Audio Quality: Users have reported significant improvements in DAC sound quality when using this power supply, noting a more stable and cleaner audio signal.
  • Voltage Selection: Always double-check and ensure the correct output voltage is selected for your specific device before connecting the power supply.
  • Internal Adjustments: While the unit offers various fixed output voltages, internal voltage adaptation by the user is not recommended or supported. Tampering with internal components may void the warranty and pose safety risks.
  • Device Compatibility: For devices requiring USB-C power input (e.g., some streamers), ensure you have the appropriate adapter cable (e.g., DC barrel to USB-C) that matches the voltage and polarity.

8. Warranty and Support

8.1 Warranty

The ASYPDZSW A32 HIFI Ultra-low Noise Linear Power Supply is covered by a one-year warranty service from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly.

EC Representative:
Company: XDH Tech
Address: 37 passage du Ponceau Bureau 270, Paris
Email: xdh.tech@outlook.com
Phone: +33 652768898

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.