Mileseey DT11 Laser Measuring Tape User Manual

1. Product Overview

The Mileseey DT11 is a versatile 2-in-1 measuring tool, combining a laser distance meter with a traditional retractable tape measure. It is designed for accuracy and ease of use in various applications, from home renovation to professional construction. This device features a high-definition LCD display, multiple measurement modes, and a durable, ergonomic design.

Figure 1: Mileseey DT11 Laser Measuring Tape

Key Features

• 2-in-1 Functionality: Combines a 40m (131ft) laser rangefinder with a 5m (16ft) physical tape measure.
• High Accuracy: Laser measurement accuracy of ±2mm.
• Rechargeable Battery: Integrated lithium battery, USB rechargeable, providing up to 5 hours of continuous use.
• Magnetic Hook: High-quality magnetic hook for stable attachment to metal surfaces.
• Automatic Calculation: Supports automatic calculation for area and volume.
• Unit Conversion: Easily switch between Metric (m/cm) and Imperial (ft/in) units.
• HD LCD Digital Display: Reverse display LCD for clear visibility in various lighting conditions.
• IP54 Protection: Water-resistant and dustproof for enhanced durability.
• Durable Design: Nylon coating for wear-resistant, non-slip, and drop-resistant performance.

Figure 2: DT11 Key Features

2. Setup and Charging

Unboxing

Upon receiving your Mileseey DT11, carefully open the packaging and ensure all components are present:

• Mileseey DT11 Laser Measuring Tape
• USB Charging Cable
• User Manual (this document)
• Certificate

Initial Charging

The DT11 is powered by a high-quality rechargeable lithium battery. Before first use, it is recommended to fully charge the device.

1. Locate the USB charging port on the side of the device.
2. Connect the provided USB charging cable to the DT11 and a compatible USB power source (e.g., computer, wall adapter).
3. The battery indicator on the LCD display will show charging status.
4. A full charge typically allows for 5 hours of continuous operation.

Figure 3: DT11 USB Charging Port

Power On/Off

• Power On: Press and hold the 'MEAS' button for a few seconds until the LCD display illuminates.
• Power Off: Press and hold the 'MEAS' button again for a few seconds. The device also features an auto-off function: the laser will turn off after 30 seconds of inactivity, and the entire device will power off after 180 seconds of suspension to conserve energy.

3. Operating Instructions

General Operation

Figure 4: DT11 HD LCD Digital Display

• Menu Button: Used for switching between different measurement modes (single, area, volume, Pythagoras) and viewing measurement history.
• MEAS Button: Initiates a measurement (single or continuous).
• UNIT Button: Short press to switch between measurement units (M/In/Ft). Long press to switch the measuring basis (front or rear edge of the device).

Laser Measurement

1. Power On: Press the 'MEAS' button to turn on the laser.
2. Single Measurement: Aim the laser at the target point and press the 'MEAS' button again. The measured distance will be displayed on the LCD.
3. Continuous Measurement: After turning on the laser, press and hold the 'MEAS' button. The device will continuously measure and display the current distance as you move it. Release the button to stop.
4. Measurement Modes: Use the 'Menu' button to cycle through modes:
   • Single Measurement: Measures a single distance.
   • Area Measurement: Measure two sides (length and width), and the device calculates the area.
   • Volume Measurement: Measure three sides (length, width, and height), and the device calculates the volume.
   • Pythagoras (2-Point): Used for indirect measurement of height or distance using two measurements.
5. Reference Point: Long press the 'UNIT' button to switch the measurement reference point between the front and rear of the device. This is crucial for accurate measurements depending on how you position the device.

Figure 5: DT11 Display and Unit Conversion

Tape Measure Usage

The DT11 includes a traditional 5m (16ft) retractable tape measure. Simply pull out the tape to the desired length. The tape features both metric (M/CM) and imperial (ft/in) markings for convenience. The magnetic hook at the end of the tape allows for easy attachment to metallic surfaces, improving stability during measurement.

Figure 6: DT11 in various measurement applications

4. Maintenance and Care

• Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
• Protection: The DT11 has IP54 protection, making it resistant to dust and splashes. However, avoid submerging it in water or exposing it to heavy rain.

Figure 7: DT11 IP54 Protection

5. Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to a USB power source and try again.
• Inaccurate laser measurements: Check the reference point setting (front or rear of the device). Ensure the laser beam is not obstructed and the target surface is suitable for reflection.
• Display issues: If the display is dim or unreadable, ensure the battery is charged. If the issue persists, contact customer support.
• Laser not emitting: Check if the device is powered on. If the laser auto-off function has activated, press 'MEAS' again to reactivate.

6. Specifications

7. Warranty and Support

The Mileseey DT11 Laser Measuring Tape is designed for reliability and durability. For detailed warranty information and customer support, please refer to the official documentation provided with your product or visit the manufacturer's website.

A digital version of the user manual is available for download: Mileseey DT11 User Manual (PDF)