1. Important Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
2. Product Overview
The ANNKE 4K Smart Dual Light Bullet Network Camera is an advanced security solution designed for both indoor and outdoor environments. It features high-resolution imaging, intelligent human and vehicle detection, and versatile night vision capabilities to ensure comprehensive surveillance.
Key Features (8MP Camera)
- 4K smart dual light bullet network camera
- 4mm@F1.6 lens for clear imaging
- Efficient H.265+ compression technology
- Motion detection 2.0 with human & Vehicle Detection
- Clear day and night vision with 3D DNR and 120DB WDR
- Built-in microphone for real-time audio security
- Support on-board storage up to 512 GB (SD card slot)
- IP67 Dust and Waterproof Rating
- Support PoE & DC12V power supply
Key Features (3K Camera)
- 3K IR Network Camera with 16:9 image scale
- 2.8mm@F1.6 lens for clear imaging
- Efficient H.265+ compression technology
- Motion detection 2.0 with human & Vehicle Detection
- Smart Dual-Light: advanced technology with long range
- Clear day and night vision with 3D DNR and 120DB WDR
- Built-in microphone for real-time audio security
- Support on-board storage up to 256 GB (SD card slot)
- IP67 Dust and Waterproof Rating
- Support PoE & DC12V power supply

3. Package Contents
Verify that all components are present in your package. The contents may vary depending on whether you purchased a 1-pack or 4-pack.
1-Pack Contents:
- 1X Camera
- 1X User Manual
- 1X Screw Bag
- 1X Wall Sticker

4-Pack Contents:
- 4X Cameras
- 1X User Manual
- 4X Screw Bags
- 1X Wall Sticker
- 2X 30m Network Cables
- 2X 18m Network Cables

4. Camera Components
Familiarize yourself with the different parts of your camera.
Bullet Camera (4mm Lens)

Bullet Camera (2.8mm Lens)

Dome Camera

5. Setup
5.1 Power Supply
Your camera supports two power supply methods:
- PoE (Power over Ethernet): Connect the camera directly to a PoE NVR or a PoE switch using an Ethernet cable. This provides both power and data connectivity through a single cable. (PoE: 802.3af, 36 to 57 V, 0.2 A to 0.1 A, max. 6.5 W)
- DC12V Power Supply: Use a compatible DC12V (±25%) power adapter (not always included) to power the camera.

5.2 Installation
The camera can be installed in various positions:
- Ceiling Mounted
- Side Mounted
- Normal (e.g., flat surface)
- Wall Mounted
Use the provided screw bags and wall sticker for secure mounting. Ensure the camera is positioned to cover the desired surveillance area.
5.3 SD Card Installation
Locate the SD card slot on your camera (refer to the Camera Components section for exact location). Insert a compatible microSD/SDHC/SDXC card (up to 512 GB for 8MP models, up to 256 GB for 3K models) for on-board storage. Ensure the camera is powered off before inserting or removing the SD card.
6. Operating Instructions
6.1 Initial Access and Remote Control
You can access and control your camera through various platforms:
- Mobile App: Download the official ANNKE VISION app from the App Store (iOS) or Google Play (Android). Follow the in-app instructions to add your camera and begin remote monitoring.
- Client Software: Install the ANNKE client software on your computer for comprehensive management.
- Web Browser: Access the camera's interface directly via a web browser by entering its IP address.

6.2 Human & Vehicle Detection
The camera features advanced Motion Detection 2.0 with deep learning algorithms to accurately distinguish between humans and vehicles. This significantly reduces false alerts triggered by animals, swaying branches, or environmental factors.


6.3 Night Vision Modes (Smart Dual-Light)
The camera offers three intelligent night vision modes, with both infrared and white light fill lights reaching up to 30 meters:
- Intelligent Mode: By default, infrared light is active at night, providing a black and white image. When a human or vehicle is detected, the infrared light switches off, and the white light turns on, providing a full-color picture.
- Infrared Mode: Only infrared fill light is used, resulting in a black and white image.
- White Light Mode: White light fill light is continuously active, providing a full-color image even at night.


6.4 Audio Recording
The camera features a built-in high-sensitivity microphone that supports environmental noise filtering. This allows for clear real-time audio recording, enhancing your security monitoring capabilities.


7. Maintenance
7.1 Cleaning
To maintain optimal performance, periodically clean the camera lens and housing with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the camera's surface or lens coating.
7.2 Weather Resistance
The camera boasts an IP67 Dust and Waterproof Rating, making it suitable for various outdoor conditions. It is designed to withstand temperatures from -22°F (-30°C) to 140°F (60°C).

8. Troubleshooting
8.1 No Image/Video Feed
- Check power connection: Ensure the camera is receiving power via PoE or DC12V adapter.
- Check network connection: Verify the Ethernet cable is securely connected to both the camera and your network device (NVR/switch/router).
- Restart the camera: Disconnect and reconnect power.
8.2 Frequent False Alarms
- Ensure Human & Vehicle Detection is enabled in the camera settings.
- Adjust motion detection sensitivity and detection zones to exclude irrelevant areas.
8.3 SD Card Not Recording
- Check if the SD card is properly inserted and formatted within the camera settings.
- Verify recording schedules and motion detection settings are configured correctly.
- Ensure the SD card is not full.
8.4 Compatibility with Third-Party Software
This camera is designed to work seamlessly within the ANNKE ecosystem (official client software, web browser interface, and mobile app). While some third-party applications might offer limited compatibility, full functionality and support are guaranteed only with ANNKE's dedicated software. Compatibility with specific third-party apps like Camhipro is not guaranteed and may require specific configurations or may not be supported.
8.5 Resetting the Camera
If you encounter persistent issues, you may need to reset the camera to its factory default settings. Locate the reset button (refer to the Camera Components section) and follow the instructions in the full user manual for the reset procedure.
9. Specifications
Detailed technical specifications for the ANNKE 4K Smart Dual Light Bullet Network Camera.
| Feature | Specification |
|---|---|
| Image Sensor | 1/2.4" Progressive Scan BSI CMOS (8MP) |
| Max Resolution | 3840*2160 (8MP) |
| Main Stream (8MP) | 50 Hz: 12.5fps@3840*2160, 20 fps (3200 × 1800, 2688 × 1520, 1920 × 1080, 1280 × 720) 60 Hz: 15fps@3840*2160, 20 fps (3200 × 1800, 2688 × 1520, 1920 × 1080, 1280 × 720) |
| Substream (8MP) | 50 Hz: 20 fps (1280 × 720, 640 × 480, 640 × 360) 60 Hz: 20 fps (1280 × 720, 640 × 480, 640 × 360) |
| Video Compression | Main stream: H.265+/H.265/H.264+/H.264 Sub-stream: H.265/H.264/MJPEG |
| Video Bitrate | 32 Kbps - 16 Mbps |
| Audio Compression | G.711u/G.722.1/G.726/MP2L2/PCM/AAC-LC |
| Audio Input | Built-in Microphone, record with audio |
| Lens (mm) | 4mm, 2.8mm |
| Minimum Illumination (Lux) | 0.005 Lux @ (F1.6, AGC ON), B/W: 0 Lux with IR |
| Angle of View | Horizontal FOV 78°, Vertical FOV 38°, diagonal FOV 96° (for 4mm lens) |
| Supplement Light Type | Smart Dual-Light, IR, White Light |
| Supplement Light Range | Up to 30 m |
| Motion Detection | Motion detection 2.0, Human & Vehicle detection |
| Image Enhancement | BLC, HLC, 3D DNR |
| Wide Dynamic Range | 120 dB WDR |
| Protocols | TCP/IP, ICMP, DHCP, DNS, HTTP, RTP, RTSP, NTP, IGMP, IPv6, UDP, QoS, FTP, SMTP |
| API | Open Network Video Interface Forum (Profile S, Profile T, Profile G) |
| Region of Interest (ROI) | 1 fixed region for main stream |
| Privacy Mask | 4 programmable polygon privacy masks |
| General Function | Rotate mode, mirror, password protection, remote access |
| Ethernet | 1 RJ45 10 M/100 M self-adaptive Ethernet port |
| Housing | Metal & Plastic |
| Color | White & Black |
| Storage | Built-in microSD/SDHC/SDXC Slot, up to 512 GB |
| Hardware Reset | Yes |
| Operating Power | DC 12 V ±25%, max. 5 W; PoE (802.3af), max. 6.5 W |
| Operating Temperature | -22 °F – 140 °F/-30 °C – 60 °C |
| Indoor/Outdoor Use | Indoor/Outdoor |
| Interface Protection | IP67 |
| Dimension (L X W X H) | 170.8 mm × 66 mm × 69.1 mm (6.7" × 2.6" × 2.7") |
| Weight | 0.6 lb./285 g |


10. User Tips
- Official App Usage: For the most reliable performance and access to all features, always use the official ANNKE VISION mobile app and client software.
- Efficient Storage: Leverage the H.265+ video compression technology to maximize your storage capacity and reduce bandwidth usage without compromising video quality.
- Wiring: While some packages include network cables, always ensure you have appropriate length and quality Ethernet cables for your installation needs, especially for PoE connections.
11. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact ANNKE customer service through their official channels. Refer to the product packaging or ANNKE's official website for contact details.