1. Introduction
The ZGEMMA STAR H2 is a versatile Digital Satellite TV Receiver designed for high-definition television reception. Running on a Linux Enigma2 operating system, it supports DVB-S2X and DVB-T2 standards, offering a wide range of features including multimedia playback, advanced Electronic Program Guide (EPG), and PVR capabilities. This manual provides essential information for setting up, operating, and maintaining your receiver.
2. Package Contents
Please check the box for the following items:
- 1 x Zgemma-Star H2 Receiver
- 1 x Remote Controller
- 1 x Power Supply (12V 2A)
- 1 x HDMI Cable
- 1 x User Manual (this document)
3. Specifications
| Feature | Description |
|---|---|
| Operating System | Linux (Enigma2, kernel > 4.01x) |
| CPU | Broadcom BCM7358, 750MHz MIPS Processor |
| Tuners | TWO Tuner built-in: DVB-S2X + DVB-T2 (Samsung 109A tuner) |
| Video Output | HDMI up to 1080p, AV Connection |
| Video Decoding | MHEG-2/4 H.264 |
| Audio Quality | Dolby Digital |
| Memory | 256MB NAND Flash / 512MB DDR3 |
| USB Ports | 2 x USB 2.0 (for PVR functions, external HDD, USB WiFi dongle) |
| Network Interface | 100 Mbit Ethernet |
| Card Reader | 1 x Smartcard-Reader |
| EPG | Advanced EPG (Electronic Program Guide) |
| Power Consumption | Low deep-standby power consumption (under 1 W) |
| DISEqC Support | DISEqC 1.0, 1.1, 1.2, 1.3 and USAL's |
4. Setup Guide
Follow these steps to set up your ZGEMMA STAR H2 receiver:
-
Connect to TV: Connect the receiver to your television using the provided HDMI cable. Insert one end into the HDMI port on the receiver and the other into an available HDMI input on your TV. Alternatively, use AV cables for older TVs.
Figure 4.1: Rear Panel Connections -
Connect Antenna/Satellite Dish:
- For Satellite (DVB-S2X): Connect your satellite dish cable to the "LNB IN" port.
- For Terrestrial (DVB-T2): Connect your terrestrial antenna cable to the "TUNER 2 IN" port.
-
Network Connection (Optional): For internet-based features and updates, connect an Ethernet cable from your router to the "ETHERNET" port on the receiver. A USB WiFi Dongle can also be used by plugging it into one of the USB 2.0 ports.
Figure 4.2: Receiver with USB WiFi Dongle - Insert Smartcard (Optional): If you have a smartcard for encrypted channels, insert it into the Smartcard-Reader slot.
- Connect Power: Plug the power adapter into the "DC IN 12V" port on the receiver, then plug the adapter into a wall outlet. Ensure the ON/OFF switch is in the 'ON' position.
- Power On: Turn on your TV and select the correct HDMI/AV input. The receiver should power on automatically or can be turned on using the remote control.
5. Operating Instructions
5.1 Initial Setup Wizard
Upon first power-on, the receiver will guide you through an initial setup wizard. This typically includes:
- Language Selection: Choose your preferred language for the On-Screen Display (OSD).
- Video Settings: Configure resolution (e.g., 1080p) and aspect ratio.
- Tuner Configuration: Set up your DVB-S2X and DVB-T2 tuners. This involves selecting your satellite (for DVB-S2X) and performing a channel scan for both tuners.
- Network Settings: Configure your wired or wireless network connection.
- Time and Date: Set the correct time zone.
5.2 Basic Functions
- Channel Navigation: Use the CH+/CH- buttons on the remote to change channels. Enter channel numbers directly using the numeric keypad.
- Volume Control: Use VOL+/VOL- buttons.
- Electronic Program Guide (EPG): Press the "EPG" button on the remote to view program schedules.
- Menu Access: Press the "MENU" button to access system settings, channel lists, and other features.
5.3 Advanced Features
- PVR (Personal Video Recorder): Connect an external USB HDD to enable recording and Timeshift functions. Use the PVR buttons (Record, Play, Pause, Stop, Timeshift) on the remote.
- Multimedia Playback: The receiver supports various multimedia plug-ins. You can play media files from USB storage devices.
- Plugin Service: Access and manage additional functionalities and services through the plugin menu.
- Parental Control: Set up PIN protection for channels or programs.
- Webinterface / WEB Remote Control: Access and control your receiver via a web browser on your computer or smartphone. Refer to the receiver's network settings for its IP address.
- DISEqC Settings: Configure DISEqC switches (1.0, 1.1, 1.2, USAL's) if you have multiple satellite dishes or LNBs.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the receiver. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure the receiver has adequate ventilation. Do not block the ventilation openings.
- Software Updates: Periodically check for software updates through the receiver's menu to ensure optimal performance and access to the latest features.
- Power Off: If not in use for an extended period, disconnect the power supply.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| No power | Check power cable connection, ensure power switch is ON, and verify wall outlet functionality. |
| No signal / No channels | Check antenna/satellite dish connections. Perform a full automatic service scan. Verify tuner configuration in settings. |
| Remote control not working | Replace batteries. Ensure no obstructions between remote and receiver. |
| Picture freezing or pixelated | Check signal strength and quality in receiver settings. Ensure antenna/dish is properly aligned. |
| No sound | Check TV volume and receiver volume. Verify audio settings on both devices. |
8. User Tips
- External HDD for PVR: For optimal PVR performance, use a dedicated external hard drive.
- Network Connectivity: Connecting the receiver to your home network (via Ethernet or USB WiFi dongle) unlocks features like plugin services and web remote control.
- Firmware Updates: Regularly check for and install the latest firmware to ensure compatibility and access to new features.
9. Frequently Asked Questions (FAQ)
- Q: Is this receiver 4K compatible?
- A: No, the ZGEMMA STAR H2 supports HDMI output up to 1080p resolution.
- Q: Will this receiver work in Africa?
- A: Yes, as it supports DVB-S2X (satellite) and DVB-T2 (terrestrial) standards, it should function in regions broadcasting these standards. Ensure your local broadcast standards match these specifications.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.