AVATTO WT498

Contents

AVATTO WT498 WiFi Smart Thermostat User Manual

Model: WT498

1. Introduction

The AVATTO WT498 is an advanced WiFi and RF wireless smart thermostat designed to provide intelligent temperature control for gas boilers and water heating systems. This device offers convenient remote management via the Tuya Smart Life app, voice control compatibility with popular assistants like Amazon Alexa, Google Home, and Yandex Alice, and flexible programming options to optimize energy consumption and comfort. Its wireless design simplifies installation by eliminating the need for direct wiring between the thermostat display unit and the receiver.

AVATTO WT498 WiFi Smart Thermostat and RF Receiver
AVATTO WT498 WiFi Smart Thermostat (display unit) and RF Receiver.

2. Setup and Installation

2.1 Package Contents

Before installation, please ensure all components are present:

  • RF Thermostat (Display Unit)
  • RF Receiver
  • User Manual (this document)
  • Mounting accessories (screws, anchors - typically included)

2.2 Powering the RF Thermostat

The RF Thermostat display unit can be powered in two ways:

  1. Batteries: Insert three (3) 1.5V AA batteries into the battery compartment.
  2. Type-C USB: Connect a Type-C power supply cable to the designated port on the thermostat base.
RF Thermostat power options: 3xAA Battery and Type-C Power Supply Cable Port
The RF Thermostat can be powered by 3xAA batteries or a Type-C USB cable.
RF Thermostat Charging Port
Charging port for the RF Thermostat.

2.3 RF Receiver Wiring

The RF Receiver connects directly to your heating system (gas boiler or electric actuator). Professional installation is recommended for wiring to ensure safety and proper function. Always turn off the main power supply before performing any wiring.

Wiring diagrams for RF Receiver with Boiler and Actuators
Detailed wiring diagrams for connecting the RF Receiver to a boiler or electric actuators.

Wiring for Gas Boiler:

  • Connect the Live (L) and Neutral (N) power supply wires to the corresponding terminals on the RF Receiver.
  • Connect the boiler control wires to the designated boiler output terminals on the RF Receiver. Refer to your boiler's manual for specific control wire connections.

Wiring for Electric Actuator:

  • Connect the Live (L) and Neutral (N) power supply wires to the corresponding terminals on the RF Receiver.
  • For a Normally Open (NO) Electric Actuator, connect the actuator's control wires to the NO output terminals.
  • For a Normally Closed (NC) Electric Actuator, connect the actuator's control wires to the NC output terminals.

2.4 Wireless Connection (RF433)

The RF Thermostat and RF Receiver communicate wirelessly via RF433. This connection is typically pre-paired. If re-pairing is needed, consult the full product manual or the Tuya Smart Life app for instructions.

2.5 App Integration (Tuya Smart Life)

  1. Download the 'Tuya Smart Life' app from your smartphone's app store (iOS or Android).
  2. Register or log in to your account.
  3. Follow the in-app instructions to add your AVATTO WT498 thermostat. This usually involves putting the thermostat into pairing mode (often indicated by a flashing Wi-Fi icon) and connecting it to your home Wi-Fi network.

3. Operating Instructions

3.1 Thermostat Display and Controls

RF Thermostat display with labeled controls
Overview of the RF Thermostat display and its interactive elements.

The thermostat display provides key information and control options:

  • Week: Current day of the week.
  • Heating display: Indicates when heating is active.
  • WiFi: Shows Wi-Fi connection status.
  • Room temperature: Current ambient temperature.
  • Set temperature: Desired temperature setting.
  • Confirmation key: Used to confirm selections.
  • Option key: Navigates through menu options.
  • Manual mode: Indicates manual operation.
  • Time: Current time.
  • Restart key: Used to restart the device.

3.2 Operating Modes

The thermostat supports three primary operating modes:

Thermostat operating modes: Manual, Auto, Temporary
Screenshot showing the selection of operating modes within the app.
  • Manual Mode: Allows you to set a constant temperature that the thermostat will maintain until changed.
  • Program Mode (Auto): Follows a pre-set schedule for temperature adjustments throughout the day and week.
  • Temporary Mode: Temporarily overrides the current program mode setting. The thermostat will revert to the program mode after a specified duration or event.

3.3 Programming Schedule

The programming mode allows for detailed scheduling to save energy and enhance comfort:

Programming mode settings in the app
The app interface for setting up weekly programming schedules.
  • Supports 5+2 (weekday/weekend), 6+1 (weekdays + one weekend day), or 7-day (individual day) programming.
  • Up to 6 time-modes daily, allowing different temperature settings for various periods (e.g., wake-up, away, home, sleep).
  • This feature promotes energy saving, cost saving, and is environmentally friendly.

3.4 APP Remote Control

Control your thermostat from anywhere, anytime using the Tuya Smart Life app:

App remote control interface for the thermostat
The Tuya Smart Life app allows remote control of the thermostat's settings.
  • Adjust temperature settings.
  • Switch between operating modes.
  • View current room temperature.
  • Access advanced settings and programming.

3.5 Voice Control

Integrate your thermostat with smart home assistants for hands-free control:

Voice control with Alexa, Google Home, and Yandex Alice
The thermostat works with Amazon Alexa, Google Home, and Yandex Alice for voice commands.
  • Compatible with: Amazon Alexa, Google Home, Yandex Alice.
  • Example commands: "Alexa, set the temperature to 22.5°C", "Hey Google, what's the temperature in the living room?"

3.6 Precise Temperature Control

Temperature control settings: hysteresis, minimum, and limits
Settings for temperature hysteresis, minimum temperature, and upper/lower limits.
  • Temperature Hysteresis: Adjustable from 0.5°C to 10°C. This setting determines the temperature differential before the heating system reactivates.
  • Minimum Temperature Setting: Can be set as low as 0.5°C.
  • Upper and Lower Temperature Limits: The adjustable range is 5°C to 95°C.

3.7 Temperature Calibration

If you notice a discrepancy between the thermostat's displayed temperature and the actual room temperature, you can calibrate it:

Temperature correction settings in the app
The app allows for temperature correction from -9.9°C to 9.9°C.
  • Adjust the temperature calibration from -9.9°C to 9.9°C via the Tuya Smart Life app settings.

3.8 Children Lock

Activate the child lock function to prevent unintended changes to settings:

Child Lock feature in the app
The Child Lock feature can be activated via the app to prevent accidental operation.
  • This feature is accessible through the Tuya Smart Life app.
  • Once activated, physical interaction with the thermostat display will be restricted.

3.9 Group Control Function

Manage multiple AVATTO WT498 thermostats across different rooms or zones:

Group control function in the app
The app allows grouping of multiple thermostats for simultaneous control.
  • Create groups within the Tuya Smart Life app to control multiple thermostats simultaneously.
  • Ideal for managing heating in multi-room environments or different floors.

3.10 Family Share Function

Share control of your smart thermostat with family members:

Family share function in the app
The family share feature allows multiple users to control the thermostat.
  • Invite family members to control the device through the Tuya Smart Life app.
  • Each invited member will have access to adjust settings and monitor the thermostat.

4. Maintenance

4.1 Cleaning

  • Wipe the thermostat display and receiver with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the device.

4.2 Battery Replacement

  • If the thermostat display unit is battery-powered, replace the three (3) 1.5V AA batteries when the low battery indicator appears on the screen.
  • Ensure correct polarity when inserting new batteries.

5. Troubleshooting

ProblemPossible CauseSolution
Thermostat display is blankNo power (batteries dead or Type-C cable disconnected)Replace AA batteries or ensure Type-C power cable is securely connected.
No heating/cooling responseRF Receiver not powered or wired incorrectly; RF connection lost; Thermostat in incorrect mode.Check RF Receiver power and wiring. Verify RF connection. Ensure thermostat is in Manual or Program mode with a set temperature above/below room temperature.
Wi-Fi icon not showing or flashingNot connected to Wi-Fi; Router issue; Incorrect Wi-Fi password.Ensure your home Wi-Fi is active. Re-attempt Wi-Fi pairing via the Tuya Smart Life app. Check Wi-Fi password. Move thermostat closer to router if signal is weak.
App cannot control thermostatNo Wi-Fi connection; App not linked to device; Server issues.Check Wi-Fi connection on thermostat and phone. Ensure device is added correctly in the app. Try restarting the app.
Inaccurate temperature readingThermostat placed near heat source/draft; Needs calibration.Relocate thermostat away from direct sunlight, drafts, or heat sources. Use the Temperature Calibration feature in the app.
Child Lock engaged unexpectedlyChild Lock activated in app.Deactivate Child Lock through the Tuya Smart Life app.

6. Specifications

Dimensions of RF Thermostat and RF Receiver
Dimensions of the RF Thermostat and RF Receiver units.
FeatureDetail
Model NumberWT498
Brand NameAVATTO
TypeWiFi RF Thermostat
OriginMainland China
CertificationCE
Receiver Power Supply110-240VAC 50/60HZ
Thermostat Power Supply3 x 1.5V AA Batteries or Type-C USB
Load Current3A (negative)
Temperature SensorNTC
Display Accuracy0.5°C
Temperature Precision±1°C
Range of Temperature Adjustment5°C ~ 90°C
Self-Consumed Power<170uW
Protection GradeIP20
APP ControlTuya Smart Life
Voice Control CompatibilityAlexa, Google Home, Yandex Alice
RF Thermostat Dimensions (W x H x D)8.6 cm x 10.5 cm x 8 cm (3.39 in x 4.13 in x 3.15 in)
RF Receiver Dimensions (W x H x D)8.6 cm x 8.6 cm x 2.8 cm (3.39 in x 3.39 in x 1.12 in)

7. Warranty and Support

7.1 Product Warranty

This AVATTO WT498 Smart Thermostat comes with a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

7.2 Returns Policy

You may be eligible for free returns within 15 days of receiving your order. Please refer to the seller's return policy for detailed conditions and procedures.

7.3 Delivery Guarantee

The product is covered by a delivery guarantee which includes:

  • A $1.00 coupon code if delivery is delayed.
  • Refund if the package is lost during transit.
  • Refund if items are damaged upon arrival.
  • Refund if no delivery occurs within 30 days.

7.4 Technical Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the AVATTO Intelligent Store directly through the platform where you made your purchase. They can provide specialized support for your product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.