1. Introduction
The Lemorele HDMI Switch Splitter is designed to expand the HDMI connectivity of your display device. This unit allows you to connect multiple HDMI source devices to a single HDMI display, eliminating the need to constantly swap cables. It supports HDMI 2.0 and 4K@30Hz resolution, ensuring high-quality audio and video transmission. The switcher features intelligent switching capabilities and can be conveniently controlled via an infrared remote or a manual button on the unit itself.

2. Safety Information
Please read and follow these safety guidelines to ensure safe operation and prolong the life of your device:
- Do not expose the device to water, moisture, or extreme temperatures.
- Avoid placing the device near heat sources or in direct sunlight.
- Use only the provided USB-C charging cable for power.
- Do not attempt to open, modify, or repair the device. Refer all servicing to qualified personnel.
- Keep the device out of reach of children.
- Ensure proper ventilation around the device to prevent overheating.
3. Package Contents
Please check the box for the following items:
- Lemorele HDMI Switcher (G96)
- USB-C Charging Cable
- Infrared Remote Control

4. Product Overview
The Lemorele HDMI Switch Splitter is a compact device designed for seamless switching between multiple HDMI sources. It features:
- HDMI IN Ports: Multiple ports (e.g., 5 for the 5-in-1 model) for connecting your source devices.
- HDMI OUT Port: A single port for connecting to your display device.
- USB-C Charging Port: For providing power to the switcher.
- Manual Switch Button: A physical button on the unit to cycle through inputs.
- IR Receiver: For receiving signals from the infrared remote control.
- LED Indicators: Lights that show which input source is currently active.

5. Setup Instructions
Follow these steps to set up your HDMI Switch Splitter:
- Connect Input Devices: Connect your HDMI source devices (e.g., computer, game console, Blu-ray player, TV box) to the HDMI IN ports (HDMI IN 1, HDMI IN 2, HDMI IN 3, etc.) on the switcher using high-quality HDMI cables.
- Connect Output Display: Connect your display device (e.g., TV, monitor, projector) to the HDMI OUT port on the switcher using an HDMI cable.
- Power Supply: Connect the provided USB-C charging cable to the switcher's charging port and then to a suitable USB power adapter (5V/1A, not included).
- Remote Control Setup: If using the remote control, gently pull out and remove the insulation adhesive from the battery compartment before first use.

6. Operating Instructions
The Lemorele HDMI Switch Splitter offers two convenient ways to switch between your connected HDMI sources:
6.1. Manual Switching
Press the 'Switch' button located on the front panel of the HDMI switcher to cycle through the connected input devices. Each press will advance to the next active input.
6.2. Remote Control Switching
Use the infrared remote control to select your desired HDMI input source. The remote typically has numbered buttons (1, 2, 3, etc.) corresponding to the input ports, or a 'NEXT' button to cycle through them.
6.3. Intelligent Switching
The switcher features Smart Switching, which automatically detects and switches to the most recently active input source. This simplifies operation by automatically selecting a new source when it becomes active.
6.4. LED Indicators
Observe the LED indicators on the switcher. Each LED corresponds to an HDMI input port and will illuminate to show which input source is currently active.

7. Maintenance
To ensure the longevity and optimal performance of your HDMI Switch Splitter, follow these maintenance tips:
- Cleaning: Keep the device clean and free from dust. Use a soft, dry, lint-free cloth for cleaning. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
- Ventilation: Ensure that the device has adequate ventilation and that its vents are not blocked.
8. Troubleshooting
If you encounter issues with your Lemorele HDMI Switch Splitter, refer to the following common problems and solutions:
8.1. No Signal or Black Screen
- Cable Connections: Ensure all HDMI cables are securely connected to both the switcher and the source/display devices. A loose connection is a common cause.
- Power: Verify the USB-C power adapter is correctly connected and the switcher is powered on (check for LED indicators).
- Input Selection: Try switching to a different input source using both the manual button on the switcher and the remote control.
- Cable Quality: Test with different HDMI cables, especially if you are using long cables or transmitting 4K content. Low-quality cables can cause signal loss.
- Device Compatibility: Ensure your source and display devices are compatible with the HDMI switcher and support the desired resolution.
8.2. Remote Control Not Working
- Insulation Tab: Ensure the insulation adhesive (plastic tab) has been removed from the remote control's battery compartment.
- Battery: Check if the remote control's battery needs replacement.
- Obstructions: Ensure there are no obstructions between the remote control and the switcher's IR receiver.
- Distance/Angle: Make sure you are within the effective range and angle of the IR receiver.
8.3. Poor Picture Quality or Flickering
- Cable Quality: For optimal performance, especially with 4K content, use high-quality HDMI 2.0 certified cables.
- Resolution Settings: Verify that your source and display devices are set to a compatible resolution (e.g., 4K@30Hz).
- Signal Amplification: The switcher has a video amplified signal function to maintain signal integrity, but extremely long or low-quality cables can still degrade performance.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Model Number | G96 |
| Type | HDMI-Compatible Cables (Switch) |
| Connector A | HDMI-Compatible |
| Connector B | HDMI-Compatible |
| Gender | Male-Female |
| Feature | HDMI-Compatible 2.0 |
| Application | Computer, Monitor, Projector, Television, TV box |
| Package | Yes |
| Certification | CE |
| Origin | Mainland China |
| Max Resolution | 4K@30Hz |
| Bandwidth | Up to 10.2Gbps |
| Dimensions (approx.) | 16.1 cm (L) x 5.7 cm (W) x 1.6 cm (H) |
| Weight (approx.) | 0.12 kg |


10. User Tips
- For optimal performance, especially when transmitting 4K content, always use high-quality HDMI 2.0 certified cables. This helps prevent signal degradation and ensures a clear, stable picture.
- Before using the infrared remote control for the first time, remember to remove the small plastic insulation tab from its battery compartment. This tab prevents battery drain during shipping.
- If you experience any issues, try power cycling the switcher by unplugging and re-plugging the USB-C power cable.
11. Warranty and Support
For detailed warranty information, technical support, or service inquiries regarding your Lemorele HDMI Switch Splitter, please refer to the official Lemorele website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official online presence.