1. Introduction
Thank you for choosing the Cada 979Pcs Sniper Rifle Building Blocks set. This set allows you to construct a detailed replica of a sniper rifle using small building blocks. Designed for an engaging assembly experience, the finished model features a functional trigger mechanism, an optical sight, and the ability to shoot soft darts. This manual provides essential information for assembly, operation, maintenance, and safety.
2. Safety Information
- WARNING: This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
- WARNING: Do not eat the building blocks.
- WARNING: When operating the functional trigger and shooting soft darts, do not point or shoot at people or animals. Always ensure a safe environment and target.
- WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Recommended Age: 6-12Y, 14+y, 18+. Adult supervision is recommended for younger users.
3. Package Contents
Upon opening your Cada 979Pcs Sniper Rifle Building Blocks set, please ensure all the following items are present:
- 979 x Building Block Pieces (Small building block, compatible with Lego)
- 1 x Multi-functional Separator (Disassembler tool)
- 5 x Soft Darts/Shells
- 1 x Adjustable Strap
- 1 x Assembly Instruction Booklet (typically included with building block sets)
4. Assembly and Setup
Follow the detailed instructions provided in your assembly booklet to construct the sniper rifle model. The process involves building block splicing, which requires careful attention to detail.
4.1 Key Components Overview
- Buttstock: The rear part of the rifle that rests against the shoulder.
- Bolt: The mechanism used for loading and ejecting darts.
- Scope: The optical aiming device.
- Barrel: The long tube through which the dart is propelled.
- Bracket: A support stand for stability.
- Magazine: Holds the soft darts.
- Trigger: Activates the firing mechanism.
4.2 Attaching the Adjustable Strap
For ease of carrying, attach the adjustable strap to the designated holes on the rifle body.
- Locate the attachment points on the rifle body.
- Align the hooks of the adjustable strap with the holes.
- Securely attach the strap.
5. Operating Instructions
5.1 Loading Soft Darts
- Remove Magazine: Gently remove the magazine from the rifle.
- Store Darts: Load the soft darts into the magazine.
- Load Dart: Insert the loaded magazine back into the rifle. Pull the bolt mechanism back and then push it forward to chamber a dart.
5.2 Firing the Rifle
Once a dart is loaded, aim at a safe target and pull the trigger to fire.
5.3 Using the Optical Sight
The sniper rifle is equipped with a functional optical sight to enhance aiming accuracy. The sight includes an open sight cursor and a fine-tuning front sight. It also features a built-in button battery for the laser function.
- Open Sight Cursor: Use this for quick target acquisition.
- Fine-tuning Front Sight: Adjust for precise aiming.
- Laser Function: The built-in button battery powers a laser dot for improved targeting. Ensure the battery is functional for this feature.
6. Maintenance
6.1 Disassembly and Cleaning
To disassemble the model for cleaning or modification, use the provided multi-functional separator tool. This tool is designed to help separate blocks without damage.
- Pin Puller: For removing pins.
- Bush Puller: For removing bushes.
- Tile Remover: For separating flat tile pieces.
- Axle Pusher: For pushing out axles.
- Normal Pin Puller: A general-purpose pin removal tool.
Clean the blocks with a soft, damp cloth if necessary. Avoid harsh chemicals or abrasive materials.
6.2 Storage
Store the assembled model or disassembled blocks in a cool, dry place away from direct sunlight to prevent material degradation.
7. Troubleshooting
- Darts not firing: Ensure the magazine is correctly inserted and the bolt mechanism is fully pulled back and pushed forward to chamber a dart. Check for any obstructions in the barrel.
- Blocks not fitting together: Refer to the assembly instructions carefully. Use the multi-functional separator to correct any misaligned or stuck blocks.
- Optical sight laser not working: Check if the built-in button battery needs replacement. Ensure the laser is not obstructed.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | Weapon Gun blocks |
| Number of Pieces | 979 |
| Block Size | Small building block (Compatible with Lego) |
| Material | Plastic |
| Is Electric | No Battery (for main function, optical sight has built-in battery) |
| Certification | CE |
| Gender | Unisex |
| Recommended Age | 6-12Y, 14+y, 18+ |
| Package Dimensions (approx.) | Length: 25 cm, Width: 20 cm, Height: 15 cm |
| Package Weight (approx.) | 1.818 kg |
9. User Tips
- Laser Sight: The optical sight is equipped with a laser. If it's not working, check the small button battery inside the scope.
- Assembly Patience: Building block sets require patience. Take your time and double-check each step in the instruction booklet.
- Disassembler Use: Don't force blocks apart. The included multi-functional separator is designed to make disassembly easy and prevent damage to the pieces.
10. Warranty and Support
For any issues or inquiries regarding your Cada 979Pcs Sniper Rifle Building Blocks set, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.