Introduction
The UGREEN Bluetooth Audio Receiver (Model CM596) is designed to add wireless audio streaming capabilities to your car stereo, home audio system, headphones, or any device with a 3.5mm audio input. Featuring Bluetooth 5.3 technology, it provides a stable and fast connection for high-quality music playback and hands-free calling.

Figure 1: UGREEN Bluetooth Audio Receiver CM596
Package Contents
Please check the package for the following items:
- UGREEN Bluetooth Audio Receiver (CM596)
- 3.5mm Audio Cable
- 3.5mm Jack Plug (Male-to-Male Adapter)
- USB-C Charging Cable
- User Manual (this document)

Figure 2: Package Contents and Connection Types
Product Diagram and Components
Familiarize yourself with the various parts of your UGREEN Bluetooth Audio Receiver:

Figure 3: Receiver Components
- Control Light: Indicates device status (pairing, connected, charging).
- Multi-function Button (MFB): Power on/off, play/pause, answer/end calls.
- Volume Up / Previous Track Button: Short press for volume up, long press for previous track.
- Volume Down / Next Track Button: Short press for volume down, long press for next track.
- USB-C Charging Port: For charging the device.
- Reset Button: Small pinhole for factory reset.
- Aux Audio Jack: 3.5mm output for connecting to audio input devices.
- Microphone: For hands-free calling.
Setup Instructions
1. Charging the Receiver
Before first use, fully charge the receiver. Connect the provided USB-C charging cable to the receiver's USB-C port and the other end to a USB power source (e.g., car charger, wall adapter, computer USB port). The control light will indicate charging status and turn off when fully charged (approx. 2 hours).
2. Connecting to an Audio Device
Connect the receiver to your desired audio system (car stereo, home speaker, wired headphones) using either the 3.5mm Jack Plug or the 3.5mm Audio Cable, depending on the input available on your audio device.
- Using 3.5mm Jack Plug: Directly plug the receiver into the 3.5mm AUX input of your audio device.
- Using 3.5mm Audio Cable: Connect one end of the audio cable to the receiver's Aux Audio Jack and the other end to the 3.5mm AUX input of your audio device.
3. Pairing with a Bluetooth Device
Follow these steps to pair your UGREEN Bluetooth Audio Receiver with your smartphone or other Bluetooth-enabled device:
- Power On: Press and hold the Multi-function Button (MFB) for 3 seconds until the control light flashes, indicating it's in pairing mode.
- Activate Bluetooth: On your smartphone or Bluetooth device, enable Bluetooth and search for available devices.
- Select Device: Look for "UGREEN-XXXX" (e.g., "UGREEN-35054") in the list of available devices and select it to connect.
- Confirmation: Once connected, the control light will change its indication (e.g., solid blue or slow flash), and you may hear an audible confirmation.

Figure 4: Bluetooth Pairing Steps
Operating Instructions
Power On/Off
- Power On: Press and hold the Multi-function Button (MFB) for 3 seconds.
- Power Off: Press and hold the Multi-function Button (MFB) for 3 seconds.
Music Playback
- Play/Pause: Short press the Multi-function Button (MFB).
- Volume Up: Short press the "Volume Up / Previous Track" button.
- Volume Down: Short press the "Volume Down / Next Track" button.
- Previous Track: Long press the "Volume Up / Previous Track" button.
- Next Track: Long press the "Volume Down / Next Track" button.
Hands-Free Calling
- Answer/End Call: Short press the Multi-function Button (MFB).
- Reject Call: Double-click the Multi-function Button (MFB).
- Activate Voice Assistant: Triple-click the Multi-function Button (MFB) (if supported by your phone).

Figure 5: Hands-free Calling in a Vehicle
Maintenance
To ensure the longevity and optimal performance of your UGREEN Bluetooth Audio Receiver, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Do not expose the device to water or excessive humidity.
- Handle with Care: Avoid dropping or subjecting the device to strong impacts.
- Charging: Use only the provided USB-C cable or a certified equivalent for charging.
Troubleshooting
If you encounter issues with your UGREEN Bluetooth Audio Receiver, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Device does not power on. | Ensure the device is fully charged. Connect it to a power source using the USB-C cable. |
| Cannot pair with Bluetooth device. |
|
| No sound or poor sound quality. |
|
| Short battery life. | Ensure the device is fully charged before use. Battery life can vary based on usage volume and environment. |
| Buttons are unresponsive. | Try resetting the device by inserting a small pin into the reset button hole. |
Specifications
| Feature | Detail |
|---|---|
| Model | CM596 |
| Bluetooth Version | 5.3 |
| Bluetooth Protocol | AVRCP, A2DP, HFP, HSP |
| Input | 3.5mm Audio |
| Charging Port | USB-C |
| Frequency Range | 2400MHz-2483.5MHz |
| Frequency Response | 20Hz-20kHz |
| Output Voltage | >7Vrms |
| SNR (Signal-to-Noise Ratio) | ≥90dB |
| Audio Codecs | SBC/AAC |
| Battery Type | Lithium Polymer Battery |
| Battery Capacity | 300mAh 3.7V (1.11Wh) |
| Charging Limited Voltage | =5.25V |
| Charging Time | About 2 Hours |
| Runtime | About 15 Hours (Music/Call) |
| Transmission Distance | 15m / 49ft (No Blocking) |

Figure 6: Bluetooth 5.3 Performance

Figure 7: Battery Life Overview
User Tips
- Compatibility with Older Equipment: This receiver is designed to work with any audio equipment that has a standard 3.5mm AUX input, making it suitable for older car stereos or home music systems that lack built-in Bluetooth functionality.
- Optimal Placement: For the best signal quality and to minimize interference, try to place the receiver in a location with a clear line of sight to your Bluetooth source device (e.g., smartphone).
- Volume Control: Adjust the volume both on your connected Bluetooth device and on the audio system (car stereo, speaker) for the best sound experience.
Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt as proof of purchase.