Alctron BX-2

Contents

Alctron BX-2 Portable Wireless Bluetooth V4.0 Receiver

Model: BX-2 | Brand: Alctron

1. Introduction

The Alctron BX-2 is a portable wireless Bluetooth V4.0 receiver designed to convert traditional wired audio systems into wireless ones. Featuring a high-quality Bluetooth 4.0 chip, it ensures optimal sound quality, compatibility, and integral performance. Simply connect the BX-2 to any device with a 3-pin XLR input, such as a PC, smartphone, or tablet, to enable wireless audio transmission. It is ideal for short-distance transmission, offering ease of use with its plug-and-play functionality.

2. Safety Information

  • Do not expose the device to water or excessive moisture.
  • Avoid extreme temperatures.
  • Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
  • Use only the specified charging method (USB charging).
  • Keep out of reach of children.

3. Product Overview

The Alctron BX-2 is a compact and portable device designed for seamless wireless audio integration. Key features include:

  • XLR Interface: Standard 3-pin XLR connector for direct integration with professional audio equipment.
  • Bluetooth V4.0: Ensures high-quality, stable, and low-consumption wireless audio transmission.
  • One-Button Control: Simple operation for power on/off and Bluetooth pairing.
  • Built-in Rechargeable Battery: Provides extended performance time.
  • USB Charging: Convenient charging via a standard USB port.
Alctron BX-2 device with XLR connector
Figure 1: Alctron BX-2 device showing the XLR connector.
Alctron BX-2 device showing the USB-C charging port and ON/OFF button
Figure 2: Alctron BX-2 showing the USB-C charging port and ON/OFF button.
Three Alctron BX-2 units illustrating different LED indicator states (green, red, off)
Figure 3: Alctron BX-2 LED indicator states (Green: Paired/Connected, Red: Charging/Low Battery, Off: Powered off).

4. Setup and Connection

  1. Charge the Device: Before first use, fully charge the BX-2 using a standard USB charger and the provided USB cable. The LED indicator will typically show red during charging and change color (or turn off) when fully charged. A 3-hour charge supports approximately 10 hours of performance.
  2. Power On: Press and hold the ON/OFF button on the BX-2 until the LED indicator lights up.
  3. Connect to Audio Equipment: Plug the 3-pin XLR connector of the BX-2 directly into the XLR input of your mixer, amplifier, or active speaker.
  4. Pair with Bluetooth Device: On your smartphone, tablet, or PC, enable Bluetooth and search for available devices. Select 'Alctron BX-2' (or similar name) from the list to pair. The LED indicator on the BX-2 will change to indicate a successful connection (e.g., solid green).
Alctron BX-2 connected to the XLR input of an active speaker
Figure 4: BX-2 connected to an active speaker.
Diagram showing Alctron BX-2 connected to a mixer/amplifier via XLR
Figure 5: Connection diagram for mixer/amplifier.
Diagram showing Alctron BX-2 connected to an active speaker's XLR input
Figure 6: Connection diagram for active speaker.

5. Operating Instructions

  1. Power On/Off: Press and hold the ON/OFF button for a few seconds to turn the device on or off.
  2. Bluetooth Pairing: When powered on, the BX-2 will automatically enter pairing mode if not already connected. Search for 'Alctron BX-2' on your source device and connect. The LED indicator will confirm the connection status.
  3. Audio Playback: Once paired, play audio from your Bluetooth source device. The audio will be transmitted wirelessly to the audio equipment connected to the BX-2.

6. Maintenance

  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Store the device in a cool, dry place when not in use.
  • Ensure the USB charging port and XLR connector are free from dust and debris.
  • The built-in lithium battery is not user-replaceable.

7. Troubleshooting

ProblemPossible CauseSolution
No audio outputDevice not powered on
Not paired
Incorrect connection
Source device volume too low
Ensure BX-2 is powered on
Verify Bluetooth pairing
Check XLR connection to audio equipment
Increase volume on source device and audio equipment
Poor audio quality / Intermittent signalToo far from source device
Interference from other devices
Low battery
Reduce distance between BX-2 and source (within 10m)
Move away from other wireless devices
Charge the BX-2
Cannot pair with deviceBX-2 not in pairing mode
Bluetooth on source device is off
Previously paired with another device
Ensure BX-2 is powered on and LED indicates pairing mode
Turn on Bluetooth on your source device
Disconnect from other devices or restart BX-2 to enter pairing mode

8. Specifications

  • Bluetooth Version: V4.0
  • Power Supply: 3.7V lithium battery
  • Standby Current: <0.5mA
  • Wireless Transmission Range: 10m
  • Sensitivity: -80dBm < ±0.1% BER
  • Charging Method: USB charging
  • Signal to Noise Ratio (SNR): ≥75dB
  • Distortion: ≤0.1%
  • Certification: CE

9. User Tips

  • The BX-2 is highly versatile and can be used with various amplified speakers, including 15-inch models, as long as they have an XLR input.
  • For optimal performance, try to keep your Bluetooth source device within the 10-meter transmission range. Obstacles like walls can reduce this range.
  • The built-in battery is designed for convenience and portability. It is not intended to be user-interchangeable.

10. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Changsha Hotone Audio Co, Ltd.

Address: #101, Building 1, No.20 Qingshan Road, Yuelu District, Changsha City, Hunan Province, China

Email: info@hotone.com

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.