Introduction
Welcome to the TANCHJIM MINO / MINO Asano True Wireless Bluetooth 5.3 Earbuds. These earbuds are designed to provide a high-fidelity audio experience with advanced features such as Active Noise Cancellation (ANC), low-latency gaming mode, and smart touch controls. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new earbuds to ensure optimal performance and longevity.
TANCHJIM MINO 'Feather of Starlight' Asano Tanch Limited Edition earbuds and charging case.
Setup and Initial Pairing
-
Unboxing and Initial Charge: Open the charging case and remove the earbuds. It is recommended to fully charge the earbuds and case before first use. Connect the Type-C charging cable to the charging case and a power source.
Contents of the package, including earbuds, charging case, and accessories.
-
Automatic Power On & Pairing Mode: Open the charging case lid. The earbuds will automatically power on and enter pairing mode, indicated by a flashing LED light.
Instant connection with the lid open, showing earbuds ready for pairing.
-
Connect to Device: On your smartphone or Bluetooth-enabled device, go to Bluetooth settings and select "TANCHJIM-MINO" from the list of available devices. Once connected, you will hear a confirmation sound.
Connecting the earbuds to a smartphone via Bluetooth.
-
TANCHJIM Mobile Application: For enhanced control and customization, download the official TANCHJIM mobile app. The app allows you to adjust sound settings, customize touch controls, and manage firmware updates.
TANCHJIM mobile app interface for personalized settings.
Operating Instructions
Smart Touch Controls
The TANCHJIM MINO earbuds feature intuitive smart touch controls on the outer surface of each earbud. Gently touch the sensing position to perform various functions:
Diagram of touch control functions.
- Single Tap: Play/Pause music, Answer/End calls (on either earbud).
- Double Tap: Previous Track (Left earbud), Next Track (Right earbud).
- Triple Tap: Activate voice assistant (Siri, Xiao Ai, etc.).
- Press and Hold for 2 Seconds:
- Left earbud: Turn on/off Noise Cancelling Mode.
- Right earbud: Turn on/off Transparency Mode.
- Double Tap and Hold for 5 Seconds: Re-pair the device (on either earbud).
Active Noise Cancellation (ANC) & Transparency Mode
The earbuds feature -45dB deep learning-based noise cancellation technology for an immersive listening experience. Transparency mode allows you to hear your surroundings without removing the earbuds, useful for awareness in public spaces.
Active Noise Cancellation in action.
Transparency (ambient) mode for situational awareness.
In-Ear Detection
The earbuds are equipped with capacitive in-ear detection. When removed from your ear, music will automatically pause. Music resumes when you put them back on.
Automatic music pause/play with in-ear detection.
Gaming Mode (Low Latency)
For an immersive gaming experience, the MINO earbuds offer ultra-low latency as short as 0.045 seconds, ensuring synchronized audio and visuals.
Low-latency mode for gaming.
Asano Tanch Original Voice Pack (Limited Edition)
The limited-edition MINO earbuds come preloaded with Chinese voice prompts recorded by Asano Tanch's voice actress. Users can also switch to default voice prompts or Japanese voice prompts via the TANCHJIM mobile app.
Asano Tanch Original Voice Pack features.
Maintenance
- Cleaning: It is recommended to clean the dust-proof nozzle and the charging contact points of the earbuds every 1 to 2 months to maintain optimal performance.
- Water Resistance: The earbuds are IPX4 rated, making them resistant to sweat and light rain. However, ensure the earbuds are dry before placing them back into the charging case to prevent damage.
- Battery Care: The product contains a built-in rechargeable lithium battery. Avoid disassembling, impacting, puncturing, squeezing, soaking in water, or throwing into fire. Do not use or store in high-temperature environments (above 55°C) or extremely low temperatures (below -15°C), as this can shorten battery life. If severe heating or bulging occurs, stop use immediately.
IPX4 waterproof and dustproof rating.
Battery Life
The MINO earbuds offer impressive battery endurance:
- Noise-Cancelling Mode: Up to 5 hours on a single charge, extended to 26 hours with the charging case.
- Standard Mode: Approximately 6 hours on a single charge, extended to 31 hours with the charging case.
- Total Battery Life (with charging case): Up to 37 hours.
Battery life illustration.
Troubleshooting (FAQs)
Unable to connect a paired phone
Usually, paired earphones and mobile phones connect automatically without needing to pair again. If you encounter connection failure:
- Delete the earphone from your mobile phone's Bluetooth device list.
- Reset the earphones to pairing mode (see "Restore Factory Settings / Initialization" below).
- Pair the earphones with your mobile phone again.
Intermittency or noise in playback
Intermittency or noise can occur if the mobile phone and the earphone are beyond the normal use distance (20m in an open, obstruction-free environment) or if there are obstructions between them. True Wireless Stereo (TWS) products may also experience intermittent playback in environments with strong wireless interference.
Restore Factory Settings / Initialization
If resetting the earphone doesn’t help resolve issues, you can initialize them:
- First, delete the earphone registration information from any connected device.
- When the earphone is turned on and not connected to any device, touch the touch key 5 consecutive times, and hold on the fifth touch.
- When the power-off sound effect (4 notes of music) sounds, the earbuds will turn off.
- Put both earbuds into the charging box, close the cover, and charge for more than 3 seconds.
- Open the cover; the earbuds will automatically turn on and enter pairing mode. You can then reconnect to your device.
Note:
- If both earbuds are interconnected, performing the above steps on one earbud will initialize both synchronously.
- If the earbuds are not interconnected, both should be initialized separately by following the steps above. After individual initialization, place both in the charging case, close the cover for >3 seconds, then open it for them to interconnect automatically.
- These operations are invalid if the earphone is currently connected to any device.
Specifications
Detailed product specifications and accessory list.
| Feature | Detail |
|---|---|
| Brand | TANCHJIM |
| Model | MINO |
| Manufacturer | Nanning Heavy Hammer Technology Co., Ltd |
| Origin | DongGuan, China |
| Frequency Response Range | 20 - 20000Hz |
| Drive Unit | 10mm diameter moving coil transducer |
| Diaphragm Material | Beryllium-plated dome + microfiber skin polymer edge suspension |
| Total Harmonic Distortion (THD) | 0.058% @1kHz 94dB |
| Unit Impedance | 32Ω |
| Wireless Connection | Bluetooth 5.3 |
| Bluetooth Protocol | AAC, SBC |
| Endurance (Earbuds + Case) | 5 hours + 26 hours (ANC mode), 6 hours + 31 hours (Standard mode) |
| Working Distance | 20 m (straight-line distance without obstacles) |
| Wired Charging Interface | Type-C |
| Charging Box Wired Input | 5V-1A |
| Earbud Battery Capacity/Power | 35mAh 3.6V 0.129Wh |
| Charging Box Battery Capacity/Power | 380mAh 3.7V 1.406Wh |
| FCC ID | 2A7T2-MINO |
Warranty and Support
Example of the warranty card and certification.
One-year Free Warranty Policy
Scope and Period of Warranty
- The warranty is limited to product failures caused by poor materials or manufacturing processes.
- The warranty period is calculated from the purchasing date (subject to the purchase certificate). If a purchase certificate cannot be provided, it will be calculated from the date of production.
- The free warranty period is one year for the earphones and half a year for the cable and other accessories.
- For non-man-made damage to the cable (internal fracture with intact outer skin) at the branch, joint, or plug, free warranty or replacement may be provided within half a year, depending on the specific conditions. Damage to the cable's outer skin at the fracture is not covered.
- If the earphone unit itself fails due to non-human reasons, a free warranty will be provided within one year.
- Failed products beyond the warranty period can be repaired or replaced for a fee (please consult TANCHJIM's customer service for specific charges).
- Warranty service will no longer be provided for this model one year after the product is announced to be discontinued.
Principles of Warranty Service
- Free warranty is provided for products that meet the warranty period and scope.
- The warranty card and purchase certificate must be presented when claiming warranty service.
- An extra fee will be charged for repair services outside the warranty period or scope (please consult TANCHJIM's customer service for specific charges).
- Products will not be guaranteed if certified by the TANCHJIM technology team as having been disassembled or repaired by a third party.
- Products returned for after-sales service must be packaged in their original packaging or equivalent protective packaging. No warranty will be given if the product is damaged due to improper packing during transport.
- After-sales service regulations may vary by country or region. For details, please consult local authorized dealers.
Safety Warnings and Notes
For correct and safe use of this product, please read this manual in detail before use. The following precautions should be taken when using earphones:
- Volume and Usage Time: Please control the volume and time of use for better hearing protection.
- Hazardous Environments: Do not use in potentially hazardous environments to ensure safety.
- Driving: Avoid using while driving. Listening to music or making calls can distract you and may cause danger.
- Children: Please place the product out of the reach of children to avoid danger caused by improper use.
- Water/Moisture: Avoid water/moisture exposure to prevent damage to the earphones.
- High Volume: Always avoid excessively high volume, as it may block out surrounding sounds or cause ear illnesses such as tinnitus. Adjust to an appropriate volume if you experience ringing in your ears or if the volume is too high.
- Discomfort: If you feel obvious discomfort, irritation, or other adverse reactions when using the product, stop immediately and consult medical service.
- Temperature: Extreme temperatures (below -15°C or above 55°C) can shorten the product's (battery) life. Avoid using or storing in such conditions.
- Battery Safety: The product contains a built-in rechargeable lithium battery. Do not disassemble, impact, stick, squeeze, soak in water, or throw into fire. Do not use under high temperatures. In case of very high temperature or bulging, stop using it immediately.
- Product Appearance: There may be differences between pictures and real objects. Any product design and specification are subject to change without prior notice.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this product without authorization from TANCHJIM will violate electromagnetic compatibility (EMC) and wireless compatibility, and the user will lose the right to operate the product.
User Tips
- App Customization: Utilize the official TANCHJIM app to access a plethora of sound profiles (EQ settings) and customize control functions for a personalized listening experience.
- Sound Quality Optimization: For optimal bass and depth, allow the earbuds a minimum of 6 hours of operation (burn-in period). The sound quality benefits significantly from high-quality audio recordings.
- ANC/Transparency Modes: While functional, be aware that the Active Noise Cancellation and Transparency modes may not be top-tier compared to some premium alternatives.
Disposal Information (WEEE)
1. Correct Disposing of Waste Electrical and Electronic Equipment (WEEE) and Symbol of the “Crossed-Out Wheeled Bin”
The crossed-out wheeled bin symbol on WEEE indicates that you are legally obligated to dispose of this equipment separately from unsorted municipal waste. Disposing of it in residual waste bins, yellow bins, or yellow bags for recyclable materials is prohibited by law. If the equipment contains portable batteries, accumulators, or lamps that are not permanently installed, these must be removed before disposing of the product and disposed of separately as waste portable batteries.
2. Ways of Returning Waste Electrical and Electronic Equipment
Owners of waste electrical and electronic equipment can return them to facilities for returning or collecting WEEE set up by public-sector waste disposal authorities, or to collection points installed by producers, retailers, or distant sellers. This ensures correct disposal of WEEE. An online registry of available collection and take-back sites can be found at: https://e-schrott-entsorgen.org/
3. Data Privacy
All end-users of waste electrical and electronic equipment are responsible for deleting all personal data from the WEEE to be disposed of.