PowMr POW-SunSmart 10K

Contents

PowMr 10KW Hybrid Solar Inverter (POW-SunSmart 10K)

User Instruction Manual

1. Introduction

The POW-SunSmart series is a new type of solar energy storage inverter control inverter integrating solar energy storage & utility charging and energy storage, AC sine wave output. It adopts DSP control and features high response speed, reliability, and industrial standard through an advanced control algorithm. This all-in-one solar inverter is suitable for both single-phase and split-phase applications, offering a rated power of up to 10KW.

PowMr 10KW Hybrid Solar Inverter

Figure 1: PowMr 10KW Hybrid Solar Inverter with key features highlighted.

2. What's in the Box

Upon unpacking your PowMr 10KW Hybrid Solar Inverter, please verify that all items listed below are present and in good condition:

  • PowMr Hybrid Solar Inverter (POW-SunSmart 10K)
  • Instruction Manual
  • Cable Lugs and Screws (2 sets)
Contents of the PowMr Inverter box

Figure 2: Visual representation of the package contents.

Video 1: Unboxing and overview of the PowMr 10KW Hybrid Solar Inverter.

3. Key Features

The PowMr 10KW Hybrid Solar Inverter offers advanced functionalities for efficient solar energy management:

  • Supports lead acid battery and Li-ion battery connections.
  • Dual activation function for dormant Li-ion batteries (mains/photovoltaic power supply access).
  • Supports split-phase and single-phase pure sine wave output (100Vac, 105Vac, 110Vac, 120Vac per phase).
  • Dual MPPT with 99.9% efficiency and maximum 22A current per circuit, compatible with high power modules.
  • Two solar inputs for simultaneous tracking of maximum power charging/carrying capacity.
  • Four charging modes: solar only, mains priority, solar priority, and mixed mains/PV charging.
  • Two output modes: utility bypass and inverter output, with uninterrupted power supply function.
  • Time-slot charging and discharging setting function for optimized energy use.
  • 360° comprehensive protection: short circuit, over current, over/under voltage, overload, backfill, over-temperature, over charge.
  • LCD large screen dynamic flow diagram for easy system monitoring.
  • Support for CAN, USB, and RS485 communication.
Key features of the PowMr 10KW Hybrid Solar Inverter

Figure 3: Overview of the inverter's main features and capabilities.

Battery compatibility and batteryless operation

Figure 4: Inverter compatibility with 48V Lead-Acid and Lithium batteries, including batteryless operation.

360 degree protection features

Figure 5: Illustration of the inverter's comprehensive 360-degree protection mechanisms.

4. Setup

4.1 Safety Information

Before installation, please read all instructions carefully. Installation should be performed by qualified personnel. Ensure all power sources are disconnected before making any electrical connections. The product is designed for indoor use. Do not expose it to rain or direct sunlight. Keep the equipment well-ventilated and do not touch while working.

4.2 Physical Installation

Install the inverter in a well-ventilated area to ensure proper heat dissipation. The inverter is equipped with 4 cooling fans for intelligent cooling. Ensure the detachable insect screen is properly installed to prevent insects from entering the machine.

4.3 Port Identification

Familiarize yourself with the inverter's connection ports:

Labeled diagram of inverter ports

Figure 6: Detailed view of the inverter's input/output ports and controls.

  1. LCD screen
  2. LED Indicators
  3. Touchable key
  4. ON/OFF Rocker Switch
  5. PV INPUT (1/1)
  6. BAT INPUT (+)
  7. BAT INPUT (-)
  8. Dry contact
  9. CAN/RS485-2 port
  10. RS485-1 port
  11. USB-B port
  12. Grounding Screw
  13. AC OUT (L+L+N)
  14. AC IN (L+L+N)
  15. AC INPUT breaker

4.4 Wiring Diagrams

The inverter supports both Split-Phase and Single-Phase configurations. Refer to the diagrams below for correct wiring. Notice: The open circuit voltage of the PV panel in series connection must be below 500V. Over-voltage caused by improper configuration is not covered by warranty.

Split-Phase and Single-Phase wiring diagrams

Figure 7: Wiring diagrams for Split-Phase and Single-Phase modes.

Detailed Split-Phase wiring diagram

Figure 8: Detailed wiring diagram for Split-Phase mode, including Mains/Generator, Battery, PV Input, and Inverter Output specifications.

5. Operating Instructions

5.1 Power On/Off

To power on the inverter, ensure all connections are secure, then switch the ON/OFF Rocker Switch (4) to 'ON' and engage the AC INPUT breaker (15).

5.2 LCD Display and Navigation

The LCD HD display screen provides real-time monitoring of photovoltaic system operating data. Use the touchable keys to navigate menus and adjust settings.

LCD HD display screen

Figure 9: Real-time monitoring data displayed on the LCD screen.

LCD display and button functions

Figure 10: Explanation of LCD indicators, fault indicators, charge/AC/INV LED indicators, and touchable key functions for menu navigation and parameter setting.

5.3 Setting Parameters

The inverter allows for various customizable settings:

  • Time-Slot Charging/Discharging Function: This function allows users to set different charging and discharging periods according to local peak and valley tariffs. This optimizes the use of utility power and PV energy. Before using this function for the first time, please set the local time in parameters 54, 55. Then, you can set the corresponding time slot according to the local peak and valley tariff charges.
  • Output Mode and Voltage: Users can change the output phase mode and output voltage via the setup menu. Output phase mode corresponds to parameter 39 (180 indicates split-phase, 0 indicates single-phase). Output voltage corresponds to parameter 38, which can be set from 100V to 120V.
  • Charging Modes: Select from four available charging modes: Solar Only, Mains Priority, Solar Priority, and Mixed Mains/PV Charging.
Time-slot charging and discharging function

Figure 11: Explanation of the time-slot charging/discharging function with a peak-valley electricity tariff graph.

Split-phase and single-phase output voltage configuration

Figure 12: Table detailing output voltage ranges for Split-Phase and Single-Phase modes, and instructions for changing settings.

5.4 Power Saving Mode

Enable power saving mode to reduce no-load loss. When the load power is below 50W, the inverter output will switch off after a 5-minute delay. When the load is more than 50W, the inverter will automatically restart.

Power Saving Mode description

Figure 13: Description of the Power Saving Mode functionality.

5.5 Monitoring and Control

The inverter supports CAN, USB, and RS485 communication for monitoring and control. An optional Wi-Fi/GPRS data acquisition module can be purchased separately to enable monitoring via a smartphone app.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your inverter:

  • Cleaning: The inverter features a detachable insect screen for easy cleaning. Regularly clean the screen to prevent dust and debris buildup, which can affect cooling efficiency.
  • Ventilation: Ensure the inverter's cooling fans are unobstructed and functioning correctly. Proper ventilation is crucial to prevent overheating.
  • Connection Inspection: Periodically check all electrical connections (AC In, AC Out, Battery, PV) for tightness and signs of corrosion or damage.
Internal features for maintenance

Figure 14: Internal features like the detachable insect screen and intelligent cooling fan, important for maintenance.

7. Troubleshooting

If you encounter issues with your inverter, please refer to the detailed troubleshooting section in the complete user manual. Common issues often relate to wiring, battery connections, or PV input voltage. Ensure all connections are correct and within specified limits. For persistent problems, gather video proof or detailed descriptions and contact customer support.

8. Specifications

Below are the technical specifications for the PowMr 10KW Hybrid Solar Inverter:

Technical Specifications table

Figure 15: Comprehensive technical specifications of the inverter.

FeatureSpecification
AC Input Voltage Range90-140Vac
AC Input/Output Frequency50Hz/60Hz
Load Capacity of Motors6HP
WaveformPure Sine Wave
Rated Output Power10000W
Output Output Voltage120/240Vac (split phase/single phase)
Battery Type48V Li-ion / Lead-Acid / User Defined
Max. AC Charging Current120A
Safety CertificationIEC62109-1, IEC62109-2, UL1741
Noise≤60dB
Battery Voltage Range40-60Vdc
Weight46.3 lbs (21kg)
Max. PV Input Power11000W
Maximum Output Power11000W
Max. PV Input Current22A
Max. MPPT Charging Current200A
Max. PV Open Circuit Voltage500V
MPPT Voltage Range125-425Vdc
Hybrid Charger Max Current200A (AC Charger + PV Charger)
Operating Temperature Range5-113°F (>113°F derated)
EMCEN61000-6-1, EN61000-6-3, FCC 15 class B
PV/AC Wire DiameterPV: 10 AWG, AC: 6AWG
Battery Wire Diameter1 AWG
Size (L*W*D)520*435*130mm (2"*1.4"*0.4"D)

9. User Tips

  • LiFePO4 Battery Compatibility: The inverter is fully compatible with LiFePO4 (Lithium Iron Phosphate) batteries, in addition to traditional lead-acid batteries. It also supports batteryless operation.
  • Time Synchronization: When utilizing the time-slot charging/discharging feature, remember to set the local time in parameters 54 and 55 first for accurate scheduling.

10. Warranty and Support

PowMr offers a 24-month warranty service for non-human damage on products purchased from official stores. If you encounter any problems, please contact customer support. Providing video proof or detailed descriptions of the issue will help expedite the processing of your request.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.