1. Introduction
The NEWFAST NF-RE513 WiFi Repeater is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a stronger, more reliable signal throughout your home or office. This device supports 2.4GHz Wi-Fi with speeds up to 300Mbps, adhering to 802.11b/g/n standards. Its compact design and external antennas ensure enhanced signal penetration and stable performance.
2. Package Contents
- 1 x NEWFAST WiFi Repeater (Model: NF-RE513)
- 1 x User Manual
3. Specifications
| Feature | Detail |
|---|---|
| Model | NF-RE513 |
| Chipset | MT7628KN |
| Frequency | 2.412GHz - 2.472GHz |
| Wireless Standard | IEEE802.11b/g/n |
| Wireless Rate | 300Mbps |
| Antennas | 2 x 3dBi External Antennas |
| Memory (DDR) | 8MB |
| Flash | 2MB |
| Buttons | 1 x RESET/WPS Button (Press 5 seconds for RST) |
| Indicators | Power Indicator (Blue), WiFi Indicator (Blue: Good Signal; Red: Weak Signal) |
| Encryption | WPA-PSK / WPA2-PSK / WPA / WPA2 |
| Working Mode | Repeater Mode |
| LAN Ports | 0 |
| Supports WDS | No |
| Dimensions | 156 x 78 x 43mm (6.1 x 3 x 1.7 inches) |
| Case Material | ABS Plastic |
| Output Power (Max) | 82mW (19dBm) |
| Receiver Sensitivity (Max) | -96dBm |
| Bandwidth | 20/40 MHz Auto |
| Working Temperature | -10℃ to 40℃ (14℉ to 104℉) |
| Storage Temperature | -40℃ to 70℃ (-40℉ to 158℉) |
| Working Humidity | 10% to 90% RH Non-condensing |
| Storage Humidity | 5% to 90% RH Non-condensing |
| Plug Type | US Plug (Adapters for UK, EU, AU may be included depending on region) |
| Certification | CE, FCC |
| Application | Home |
4. Setup Instructions
The NEWFAST NF-RE513 WiFi Repeater can be set up quickly using a smartphone, computer, or tablet. Follow these steps for a successful setup in Repeater Mode:
4.1. Standard Setup (via Web Browser)
- Power On: Plug the WiFi Repeater into a power outlet. Wait for the Power Indicator light to turn blue.
- Connect to Repeater: On your phone, computer, or tablet, connect to the Wi-Fi network named "NF-RE513" (or similar, like "NEWFAST --xxx"). This is the repeater's default SSID.
- Access Setup Page: Open a web browser (e.g., Chrome, Firefox, Safari) and enter
192.168.10.1in the address bar. This will open the repeater's Graphical User Interface (GUI). - Select Repeater Mode: On the GUI page, select "Repeater Mode".
- Choose Network to Extend: The repeater will scan for available Wi-Fi networks. Select the Wi-Fi signal you wish to extend from the list.
- Enter Password: Input the password for your existing Wi-Fi network.
- Complete Setup: Click "Setup" or "Apply". Wait for approximately 5 seconds for the settings to be applied.
- Verify Connection: If the Wi-Fi Indicator light turns blue, the setting is successful, and the repeater is now extending your network. A red light indicates a weak signal or an issue with the setup.
4.2. WPS Setup (One Key Connection)
If your existing router supports WPS (Wi-Fi Protected Setup), you can use the one-key connection method:
- Activate WPS on Router: Press the WPS button on your existing main router.
- Activate WPS on Repeater: Within two minutes, press the WPS button on the NEWFAST WiFi Repeater.
- Wait for Connection: The repeater will automatically connect to your router. The Wi-Fi Indicator light will turn blue once connected successfully.
5. Operating Modes
The NEWFAST NF-RE513 primarily operates in Repeater Mode. In this mode, it wirelessly connects to your existing router's Wi-Fi network and re-broadcasts it, extending the signal to areas with poor coverage.
- Indicator Lights:
- Power Indicator (Blue): Indicates the device is powered on.
- WiFi Indicator (Blue): Indicates a good signal strength from the main router.
- WiFi Indicator (Red): Indicates a weak signal strength from the main router, suggesting the repeater might be placed too far away.
6. Maintenance
To ensure optimal performance and longevity of your NEWFAST WiFi Repeater, consider the following maintenance tips:
- Placement: Place the repeater in an open area, away from obstructions like thick walls, metal objects, and other electronic devices that may cause interference. Refer to the Wi-Fi indicator light for optimal placement (blue for good signal).
- Heat Dissipation: The device features side heat dissipation holes. Ensure these are not blocked to allow for proper airflow and stable operation, especially during continuous 24-hour use.
- Cleaning: Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates. Updating firmware can improve performance, add new features, or fix bugs.
- Resetting the Device: If you encounter persistent issues or wish to reconfigure the device from scratch, you can perform a factory reset by pressing and holding the RESET/WPS button for 5 seconds.
7. Troubleshooting
If you experience issues with your WiFi Repeater, try the following troubleshooting steps:
- No Power/No Lights:
- Ensure the repeater is securely plugged into a working power outlet.
- Try a different power outlet.
- Weak Signal (Red WiFi Indicator Light):
- The repeater is likely too far from your main router. Move the repeater closer to the router, ideally in a location where the WiFi indicator light turns blue.
- Ensure there are no major obstructions (thick walls, large metal objects) between the router and the repeater.
- Cannot Access Setup Page (192.168.10.1):
- Ensure your device (phone/computer) is connected to the repeater's default Wi-Fi network (e.g., "NF-RE513").
- Verify that you have typed the IP address
192.168.10.1correctly in the browser's address bar. - Try clearing your browser's cache or using a different browser.
- Temporarily disable any VPN or proxy settings on your device.
- Repeater Not Connecting to Main Router:
- Double-check the Wi-Fi password you entered for your main router during setup. Passwords are case-sensitive.
- Ensure your main router's Wi-Fi is active and broadcasting.
- If using WPS, ensure both buttons are pressed within the required timeframe.
- Try performing a factory reset on the repeater (press and hold RESET/WPS button for 5 seconds) and repeat the setup process.
- Connected but No Internet Access:
- Verify that your main router has an active internet connection.
- Restart both your main router and the repeater.
- Perform a factory reset on the repeater and reconfigure.
8. User Tips
- Optimal Placement: For the best performance, place the repeater roughly halfway between your router and the area where you need improved Wi-Fi coverage. The blue Wi-Fi indicator light confirms a strong connection to your main router.
- Security: After initial setup, consider changing the default administrative password for the repeater's web interface (192.168.10.1) to enhance security.
- Network Name: The repeater will typically broadcast a new Wi-Fi network name (SSID) by adding "_EXT" or similar to your original network name. Connect your devices to this extended network for improved signal.
- Compatibility: This repeater is designed to be compatible with 99% of standard routers, making it versatile for most home network setups.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.
