AIFEN A10

Contents

AIFEN A10 Soldering Station User Manual

Model: A10 | Brand: AIFEN

Introduction

The AIFEN A10 is a smart soldering station designed for precision welding and rework tasks. It offers compatibility with T115, T210, and T245 handles, and is also compatible with JBC soldering iron tips. Featuring advanced chip program temperature control, the A10 ensures fast heating, rapid temperature recovery, and high accuracy, distinguishing it from traditional soldering stations. The handle includes a dormant metal ring for automatic sleep mode when placed in the stand, enhancing safety and tip longevity.

AIFEN A10 Soldering Station with various handles and tips
AIFEN A10 Soldering Station with compatible handles and tips.

Specifications

FeatureDetail
Power75W (MAX)
Input VoltageAC110V / AC220V
Frequency50-60Hz
Temperature Range100°C - 450°C (194°F - 896°F)
Weight (Station)Approximately 525g
Handle CompatibilityT115, T210, T245
Soldering Tip CompatibilityC115, C210, C245 (I, IS, K types)
CertificationsCE, FCC, WEEE
OriginMainland China

Setup Guide

  1. Unpack Components: Carefully remove the soldering station, handle(s), soldering tips, and power cord from the packaging.
  2. Connect Power: Plug the power cord into the soldering station and then into a suitable AC power outlet (ensure voltage matches your unit: 110V or 220V).
  3. Attach Handle: Connect the desired handle (T115, T210, or T245) to the appropriate port on the soldering station.
  4. Insert Soldering Tip: The AIFEN A10 features a quick-change soldering iron head holder. Simply insert the chosen C115, C210, or C245 tip into the handle. No additional tools like pliers or tweezers are needed for tip changes.
  5. Place Handle in Stand: Position the handle in the designated stand. The dormant metal ring will automatically activate sleep mode when the handle is at rest.
AIFEN A10 Soldering Station with three universal handles
The AIFEN A10 supports T115, T210, and T245 handles, offering versatility for various tasks.
Quick change soldering iron head holder
Quick change of soldering iron tip without waiting for temperature to cool down.

Operating Instructions

Power On/Off

  • Press and hold the 'SET' button (or the combined A/B keys) to power the unit ON or OFF. The digital display will show 'ON' or 'OFF' accordingly.

Temperature Adjustment

  • Use the '+' button (B Key) to increase the temperature.
  • Use the '-' button (A Key) to decrease the temperature.
  • The high-definition digital display screen shows the current set temperature.

Temperature Compensation and Stability

  • The AIFEN A10 utilizes high-end precision PID programs for intelligent temperature control. This allows the actual temperature to be monitored and corrected at high speed, providing quick temperature compensation to maintain accuracy during soldering.
  • The station features PID Temperature Stability for consistent performance.

Celsius/Fahrenheit Conversion

  • The unit supports conversion between Celsius (°C) and Fahrenheit (°F) for temperature display. Refer to the device's specific button combination for this function, usually involving a short press or combination press of the 'SET' button.

Automatic Sleep Mode

  • When the handle is placed in its stand, the dormant metal ring will automatically detect this and put the soldering station into sleep mode, preserving tip life and saving energy.
AIFEN A10 Soldering Station temperature display and compensation function
High-Definition Digital Display Screen showing temperature range and compensation function.
Handle control for temperature and power on/off
Illustrates temperature adjustment and power control via handle buttons.

Maintenance

  • Cleaning Soldering Tips: Regularly clean soldering tips using the integrated copper wire brush in the station. This helps remove oxidation and solder residue, ensuring efficient heat transfer and longer tip life.
  • General Cleaning: Keep the soldering station and handles clean from dust and debris. Use a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Tip Storage: When not in use, ensure soldering tips are properly tinned before storage to prevent oxidation. Store them in a dry environment.
  • Power Cord Inspection: Periodically check the power cord for any signs of damage. Do not use the station if the cord is frayed or damaged.

Troubleshooting

  • Inaccurate Temperature Readings: The AIFEN A10 is designed for small temperature errors, which can be further minimized through calibration. If you suspect temperature inaccuracies, it is recommended to use a dedicated temperature tester (e.g., S-191 soldering iron temperature calibrator) to verify and calibrate the station.
  • Slow Heating or Poor Performance: Ensure the soldering tip is clean and properly seated in the handle. A dirty or poorly connected tip can hinder heat transfer. Verify the power connection is secure.
  • Station Not Powering On: Check the power cord connection and the power outlet. Ensure the power button is pressed and held correctly to turn the unit on.

User Tips

Selecting the correct handle and tip combination is crucial for optimal performance across different soldering tasks:

  • For Ultra-Fine Circuits: When working on multi-layer circuit boards, complex flying wires, or other ultra-fine applications under a microscope, the T115 handle with corresponding C115 heating cores is recommended. Use cutter heads for small solder joints and pointed heads for tiny solder joints.
  • For Mobile Phones, Small Appliances, Cables: For general maintenance of mobile phones, vehicle remote controls, precision small electrical appliances, or cables, the T210 handle with C210 heating cores is suitable. This combination is ideal for small to medium-sized solder joints, small flying wires, and IC sockets.
  • For Home Appliances, Computer Motherboards: For tasks involving home appliance maintenance, computer motherboards, or larger components, the high-power T245 handle with C245 heating cores is recommended. This handle offers significant power (up to 120W) for large solder joints with cutter heads, as well as small pointed solder joints. Note that due to the larger size of the T245 soldering iron tips, they may not be ideal for extremely tiny solder joints.
AIFEN A10 with T210 handle and C210 tips
AIFEN A10 with T210 handle and C210-I, C210-IS, C210-K tips.
AIFEN A10 with T245 handle and C245 tips
AIFEN A10 with T245 handle and C245-I, C245-IS, C245-K tips.
AIFEN A10 with T115 handle and C115 tips
AIFEN A10 with T115 handle and C115-K, C115-IS, C115-I tips.

Warranty and Support

For any technical assistance, warranty claims, or product support, please contact the seller or manufacturer directly. Keep your purchase records for reference. The manufacturer provides certifications including CE, FCC, and WEEE, ensuring product quality and compliance.

© 2023 AIFEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.