K&F CONCEPT MS03

Contents

K&F CONCEPT MS03 Selfie Stick & Extension Tripod User Manual

Model: MS03 (KF09.133V1)

Brand: K&F CONCEPT

1. Introduction

The K&F CONCEPT MS03 is a versatile 2-in-1 selfie stick and extension tripod designed for action cameras and smartphones. Its compact and lightweight design makes it ideal for travel and outdoor activities, allowing users to capture stable and high-quality photos and videos. This manual provides detailed instructions for the proper setup, operation, and maintenance of your MS03 device.

2. Package Contents

  • K&F CONCEPT MS03 Selfie Stick & Extension Tripod
  • User Manual (this document)

3. Setup

3.1 Unfolding the Tripod

  1. Hold the main body of the MS03.
  2. Gently pull the three legs outwards until they lock into place, forming a stable base.

3.2 Extending the Selfie Stick

  1. Hold the base of the MS03.
  2. Pull the top section upwards to extend the stick. The MS03 features 5 sections for height adjustment.
  3. Extend each section to your desired height. The aviation-grade aluminum alloy shaft ensures stability.

3.3 Mounting Your Camera

  1. The MS03 features a universal interface compatible with GoPro, DJI Osmo Action, Insta 360, and other action cameras.
  2. Align your camera's mounting bracket with the universal interface on the MS03.
  3. Secure the camera using the provided screw or locking mechanism on your camera's mount. Ensure it is tightened firmly to prevent accidental detachment.
K&F CONCEPT MS03 in tripod and selfie stick modes with a GoPro camera

Figure 3.1: MS03 in both tripod and selfie stick configurations with a mounted camera.

Hand holding the compact, folded K&F CONCEPT MS03 selfie stick

Figure 3.2: The compact, folded design for easy portability.

Person extending the K&F CONCEPT MS03 selfie stick

Figure 3.3: Extending the stick for desired height adjustment.

4. Operating Instructions

4.1 Adjusting Height and Mode

  • The MS03 offers 5 levels of height adjustment, allowing you to set the stick from its folded length of 12.5cm/4.9" up to a maximum extended length of 32cm/12.6".
  • Easily switch between selfie stick mode (extended and handheld) and tripod mode (legs deployed for stable placement).
Diagram showing 5 levels of height adjustment for the K&F CONCEPT MS03

Figure 4.1: Visual representation of the 5-section height adjustment.

4.2 Ensuring Stability

  • When using in tripod mode, ensure the three legs are fully spread and locked.
  • The widened three-legged fixed structure and non-slip silicone pads at the bottom provide enhanced stability, especially on flat surfaces.
  • The MS03 supports a load capacity of up to 2kg/4.4lbs. Do not exceed this weight to maintain stability and prevent damage.
Image demonstrating the 2kg/4.4lbs load capacity of the K&F CONCEPT MS03

Figure 4.2: The MS03's stable design supports cameras up to 2kg/4.4lbs.

Close-up of the K&F CONCEPT MS03's widened three-legged fixed structure with non-slip silicone pads

Figure 4.3: Detail of the stable three-legged structure and non-slip pads.

4.3 Recording and Photography

  • Use the MS03 to easily capture moments and record every adventure.
  • The aviation-grade aluminum alloy shaft minimizes shaking, ensuring stable and durable performance for high-quality video recording.
Two-in-one design of K&F CONCEPT MS03 showing selfie stick and tripod use

Figure 4.4: The versatile two-in-one design for various shooting scenarios.

Person using K&F CONCEPT MS03 for easy shooting

Figure 4.5: Enjoy easy shooting with the MS03.

Person recording high-quality, shake-free video with K&F CONCEPT MS03

Figure 4.6: Record stable and high-quality video.

K&F CONCEPT MS03 universal interface compatible with various action cameras

Figure 4.7: Universal interface for broad compatibility.

Video 4.1: Product demonstration of the K&F CONCEPT MS03 Selfie Stick & Extension Tripod, showcasing its features and use with action cameras.

5. Maintenance

  • Cleaning: Wipe the tripod and selfie stick with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, a slightly damp cloth can be used, followed by immediate drying.
  • Storage: Store the MS03 in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully retracted and the legs are folded for compact storage.
  • Avoid Force: Do not apply excessive force when extending or retracting the sections, or when folding/unfolding the legs. This can damage the internal mechanisms.
  • Check Connections: Periodically check that all screws and connections are secure, especially the camera mounting point.

6. Troubleshooting

  • Instability in Tripod Mode:
    • Ensure all three legs are fully extended and locked into position.
    • Verify that the camera's weight does not exceed the 2kg/4.4lbs load capacity.
    • Place the tripod on a flat, stable surface.
  • Difficulty Extending/Retracting Sections:
    • Check for any visible obstructions or debris in the shaft sections.
    • Clean the sections as described in the Maintenance section.
    • Avoid twisting the sections; pull them straight out or push them straight in.
  • Camera Not Securely Mounted:
    • Ensure the camera's mounting bracket is correctly aligned with the universal interface.
    • Tighten the mounting screw firmly. Do not overtighten.

7. Specifications

FeatureSpecification
Model NumberKF09.133V1
Brand NameK&F CONCEPT
MaterialAluminum alloy
TypeTable Tripod, Phone Tripod, Selfie Stick Desktop Stand
Max Extended Length320mm / 12.6"
Folded Length125mm / 4.92"
Weight87g / 0.2lbs
Load Capacity2kg / 4.4lbs
Minimum Working Height102mm / 4"
Leg Diameter7-16mm / 0.28-0.63"
Center Column Sections5
Compatible UseVideo Camera, Action Cameras, 360° Video Camera, Point & Shoot Cameras, Special Camera, DSLRs, Smartphones, Mirrorless System Camera, Digital Cine Cameras

8. User Tips

  • Always ensure your camera is securely mounted before use, especially when extending the stick or moving the tripod.
  • When using the tripod on uneven terrain, carefully adjust the leg positions to maximize stability.
  • For optimal stability in selfie stick mode, extend the sections fully and hold the grip firmly.
  • Consider the lighting conditions and background when composing your shots, whether using it as a selfie stick or a tripod.

9. Warranty and Support

K&F CONCEPT products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official K&F CONCEPT website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.