Introduction
Thank you for purchasing the Optoma ZC501 Active Shutter 3D Glasses. These glasses are designed to provide an immersive 3D viewing experience when paired with compatible DLP-LINK™ 3D Ready projectors. This manual provides essential information on setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your 3D glasses.
Compatibility
The Optoma ZC501 3D Glasses are universally compatible with all DLP 3D projectors that support DLP-LINK™ synchronization. This includes, but is not limited to, the following projector models:
- Optoma HD25, HD25E, HD30+, HD26, HD50, ZH33, HD290, 28ES, UHD566, UHD520, LC2
- Universal DLP 3D projectors from brands such as BenQ, Acer, JmGo, XGIMI, Xiaomi, and others.
Setup
1. Initial Charging
Before first use, ensure the 3D glasses are fully charged. The glasses feature a rechargeable battery.
- Locate the Micro-USB charging port on the top of the glasses.
- Connect the provided USB cable to the charging port and a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Charge the glasses for at least 4 hours for the initial charge.
- The LED indicator will show charging status (specific behavior not detailed, typically solid for charging, off or different color for full).
2. Powering On/Off
- To power on, press the power button (switch) located near the charging port.
- To power off, press and hold the power button. The glasses also feature a fast shutdown mode.
3. Synchronization with Projector
The Optoma ZC501 glasses use DLP-LINK™ technology for synchronization. No manual pairing is typically required.
- Ensure your DLP 3D projector is powered on and displaying 3D content.
- Power on the ZC501 3D glasses.
- The glasses should automatically synchronize with the projector's DLP-LINK™ signal. The LED indicator may change to confirm synchronization.
- If synchronization does not occur, ensure there are no obstructions between the glasses and the projector's 3D emitter (usually integrated into the projector).
Operating Instructions
Wearing the Glasses
Place the glasses comfortably on your face. The lightweight design and replaceable nose support are designed for extended viewing comfort.
Viewing 3D Content
Once synchronized with a DLP-LINK™ 3D projector displaying 3D content, the active shutter lenses will rapidly alternate between opaque and transparent states, creating the 3D effect. Ensure you are within the recommended viewing distance and angle for your projector for the best experience.
Maintenance
Cleaning the Lenses
- Use the provided lens cloth to gently wipe the lenses.
- Do not use abrasive cleaners, alcohol, or solvents, as these can damage the lens coating.
- Avoid touching the lenses with your fingers to prevent smudges.
Battery Care
- Recharge the battery when the LED indicator suggests low power or when 3D performance degrades.
- Avoid fully discharging the battery frequently to prolong its lifespan.
- If storing for an extended period, charge the glasses to about 50% and store in a cool, dry place.
Storage
- Store the glasses in the provided carrying bag to protect them from dust and scratches.
- Avoid exposing the glasses to extreme temperatures or direct sunlight for prolonged periods.
Troubleshooting
No 3D Effect / Glasses Not Synchronizing
- Check Projector: Ensure your projector is a DLP-LINK™ 3D Ready model and is currently outputting a 3D signal.
- Charge Glasses: Make sure the glasses are fully charged. A low battery can affect synchronization.
- Power On: Confirm the glasses are powered on.
- Obstructions: Remove any objects that might be blocking the line of sight between the glasses and the projector's 3D emitter.
- Distance: Ensure you are within the effective range of the projector's 3D signal.
- Restart: Try turning off both the projector and the glasses, then restart them.
Image Appears Dim or Flickering
- Battery Level: Recharge the glasses. Dimming or flickering can indicate a low battery.
- Ambient Light: Excessive ambient light can interfere with the 3D effect. Try dimming room lights.
- Projector Settings: Check your projector's 3D settings and brightness levels.
Glasses Not Charging
- Cable/Adapter: Try a different Micro-USB cable or power adapter to rule out faulty accessories.
- Port: Ensure the charging cable is securely inserted into the charging port.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ZC501 (501) |
| Brand Name | Optoma (also PYL) |
| Synchronizing Method | DLP Link |
| Battery Type | Rechargeable Battery (Included) |
| Charging Method | Micro-USB Charging |
| Working Time (Battery) | More than 40 hours |
| Weight | 34.5g |
| Interface | Battery Button x1, LED Indicator x1, Charging Hold x1 |
| Frame Replace Available | No |
| High-concerned chemical | None |
| Language | English |
| Connection | External Connection |
| Function | VIDEO |
| Certification | None |
| Origin | Mainland China |
| Included Accessories | 3D Glasses, USB Cable, Lens Cloth, Carrying Bag, Manual |
User Tips
- For the best 3D experience, ensure your viewing environment is as dark as possible to minimize reflections and maximize contrast.
- Always use the provided lens cloth for cleaning to avoid scratching the lenses.
- Keep the glasses charged, especially before long viewing sessions, to avoid interruptions.
- If you experience eye strain, take regular breaks during 3D viewing.
Warranty and Support
This product typically comes with a 12-month free maintenance warranty. For warranty claims or technical support, please contact your original point of purchase or the manufacturer's authorized service center. Keep your proof of purchase for warranty validation.
For further assistance, refer to the official Optoma support resources or the included manual in your product package.