Introduction
This manual provides instructions for the safe and efficient use of your Cofun 3-in-1 Pasta Attachment, designed for KitchenAid Stand Mixers. This versatile attachment allows you to easily prepare fresh pasta sheets, fettuccine, and spaghetti at home. Crafted from premium aluminum with a food-grade POM protective case, it offers durability and ease of use for all your pasta-making needs.

Setup
- Ensure your KitchenAid Stand Mixer is turned off and unplugged.
- Locate the power hub on the front of your KitchenAid Stand Mixer.
- Loosen the attachment knob on the mixer.
- Insert the shaft of the Cofun 3-in-1 Pasta Attachment into the power hub, ensuring the attachment is securely seated.
- Tighten the attachment knob until the pasta attachment is firmly in place.
- Plug in your KitchenAid Stand Mixer.
Operating Instructions
The Cofun 3-in-1 Pasta Attachment features a pasta roller, a fettuccine cutter, and a spaghetti cutter, all integrated into one unit. You do not need to change attachments for different pasta types.
1. Preparing Pasta Sheets (Pasta Roller)
- Prepare your pasta dough according to your recipe. Ensure the dough is firm and not too sticky.
- Set the thickness adjustment knob to the highest setting (e.g., '8' for the thickest sheet).
- Turn on your KitchenAid mixer to a low speed (typically speed 2).
- Feed a flattened piece of dough through the pasta roller.
- Fold the dough in half or thirds and feed it through again. Repeat this process several times until the dough is smooth and pliable.
- Gradually decrease the thickness setting, feeding the dough through the roller at each setting until you reach your desired pasta sheet thickness (e.g., '1' or '2' for thin pasta). The attachment offers 8 thickness settings, from 0.4mm to 2mm.


2. Cutting Fettuccine
Once you have prepared your pasta sheets to the desired thickness:
- Feed the pasta sheet through the left-side cutter of the attachment.
- The attachment will cut the sheet into hearty fettuccine noodles.


3. Cutting Spaghetti
Once you have prepared your pasta sheets to the desired thickness:
- Feed the pasta sheet through the right-side cutter of the attachment.
- The attachment will cut the sheet into classic spaghetti noodles.


Maintenance
Proper cleaning and maintenance will ensure the longevity and optimal performance of your pasta attachment.
- DO NOT immerse the attachment in water.
- The attachment is NOT dishwasher safe.
- After each use, allow the attachment to air dry for a short period to let any residual dough harden.
- Use the provided cleaning brush to remove any flour or hardened dough bits from the rollers and cutters.
- The protective case can be opened to access and remove dough from any gaps, facilitating thorough cleaning.
- Wipe the exterior of the attachment with a dry, soft cloth.

Troubleshooting
- Dough not feeding smoothly: Ensure your dough has the correct consistency (not too wet or dry). Lightly flour the dough if it's sticking. Make sure the mixer speed is set appropriately (usually low, speed 2).
- Pasta tearing or uneven: This often indicates the dough is too sticky, too dry, or has not been kneaded enough. Ensure you pass the dough through the widest setting multiple times, folding it, before gradually reducing the thickness.
- Attachment not fitting: Verify that the attachment shaft is fully inserted into the mixer's power hub and the attachment knob is securely tightened.
- Difficulty cleaning: Allow any wet dough to dry and harden before attempting to brush it off. The protective cover can be opened for better access to internal parts for cleaning.
Specifications
| Product Type | 3-in-1 Pasta Maker Attachment |
| Compatibility | All KitchenAid Stand Mixers |
| Functions | Pasta Sheet Roller, Fettuccine Cutter, Spaghetti Cutter |
| Material | Premium Aluminum, Food-grade POM (protective case) |
| Thickness Settings | 8 adjustable settings (0.4mm to 2mm) |
| Approximate Weight | 1.34 kg |
| Approximate Package Dimensions (L x W x H) | 2 x 7 x 3 (units not specified, typically cm or inches) |
| Origin | Mainland China |
User Tips
- For best results, ensure your pasta dough is well-kneaded and has a firm, elastic consistency before feeding it into the roller.
- Always start with the thickest setting on the pasta roller and gradually decrease the thickness. This helps to condition the dough and achieve a smooth, even sheet.
- Lightly flour your dough sheets if they become sticky during the rolling or cutting process to prevent sticking to the rollers.
- When cutting noodles, ensure the pasta sheet is evenly fed into the cutter to prevent uneven lengths or tearing.
- After cutting, hang your fresh pasta to dry slightly before cooking or storing to prevent clumping.
Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty purposes.