1. Introduction
The UGREEN HDMI Splitter 1 in 2 Out (Model CM569-90513) allows you to duplicate a single HDMI source to two HDMI displays simultaneously. It supports 4K@60Hz resolution, HDMI 2.0, HDCP 2.2, 3D, and HDR, providing a high-quality video and audio experience. This device is ideal for applications requiring the same content to be shown on multiple screens, such as presentations, home entertainment, or digital signage.
Important Note: This HDMI splitter operates in mirror/duplicate screen mode only. It does not support extended desktop mode for PCs or laptops. Both connected displays will show identical content.

Image: UGREEN HDMI Splitter 1 in 2 Out, highlighting 4K@60Hz and HDMI 2.0 features.
2. Package Contents
- UGREEN HDMI Splitter (Model CM569-90513)
- Power Adapter (typically 5V-12V, specific type may vary)
- User Manual (this document)
3. Product Overview
Familiarize yourself with the ports and indicators on your UGREEN HDMI Splitter.

Image: Front view of the HDMI Splitter showing HDMI IN, HDMI OUT 1, and HDMI OUT 2 ports, along with examples of compatible display and source devices.
Ports and Indicators:
- HDMI IN: Connects to your single HDMI source device (e.g., laptop, PS5, set-top box).
- HDMI OUT 1: Connects to your primary HDMI display.
- HDMI OUT 2: Connects to your secondary HDMI display.
- Power Port: For connecting the power adapter.

Image: Top view of the HDMI Splitter showing the EDID switch and LED indicators for Power, Input, and Outputs 1 & 2.
- POWER LED: Illuminates when the splitter is powered on.
- INPUT LED: Illuminates when an HDMI source is connected to the HDMI IN port.
- OUTPUT 1 LED: Illuminates when a display is connected to HDMI OUT 1.
- OUTPUT 2 LED: Illuminates when a display is connected to HDMI OUT 2.
- EDID Switch: Used to select the EDID mode (Extended Display Identification Data) for optimal compatibility with connected displays. Typically, '1' or 'ON' refers to a specific EDID setting, often copying the EDID from Output 1.
4. Setup Instructions
Follow these steps to set up your UGREEN HDMI Splitter:
- Power Off Devices: Ensure all HDMI source devices and displays are powered off before making connections.
- Connect HDMI Source: Connect your HDMI source device (e.g., laptop, game console, set-top box) to the HDMI IN port on the splitter using a high-quality HDMI cable.
- Connect Displays: Connect your primary display to the HDMI OUT 1 port and your secondary display to the HDMI OUT 2 port on the splitter.
- If your displays have different resolutions, it is recommended to connect the highest resolution display to HDMI OUT 1.
- Connect Power: Connect the provided power adapter to the splitter's power port, then plug the adapter into a power outlet. The POWER LED on the splitter should illuminate.
- Power On Devices: Power on your HDMI source device, followed by your displays.
- Verify Connection: Check that the INPUT LED and the respective OUTPUT LEDs (1 and 2) are illuminated, indicating active connections.

Image: A laptop connected to the HDMI splitter, which then outputs to two monitors, demonstrating dual screen simultaneous display.
5. Operating Instructions
Once set up, the UGREEN HDMI Splitter operates automatically.
- Automatic Operation: The splitter will automatically detect the input signal and distribute it to both connected displays. Audio and video signals are synchronized without manual adjustments.
- EDID Management: The EDID switch on the splitter allows you to manage how the source device recognizes the capabilities of the connected displays.
- The 'ON 1' position typically instructs the splitter to copy the EDID information from the display connected to HDMI OUT 1. This is useful when you want the source to output a resolution and format compatible with your primary display.
- Other positions (e.g., '1' or '2' if available) might correspond to pre-set EDID modes or copying from the other output. Adjust this switch if you encounter display compatibility issues.
- Resolution Handling: If connected displays support different resolutions, the splitter will automatically negotiate and output the highest common resolution supported by both displays. For optimal 4K@60Hz resolution, ensure both your source and displays support it, and use HDMI cables within 5 meters (16.4 feet) that are rated for 4K@60Hz.

Image: Demonstrating real 4K HDR output at 60Hz through the splitter to a television.
6. Specifications

Image: Detailed product specifications and physical dimensions of the HDMI Splitter.
| Attribute | Detail |
|---|---|
| Brand Name | UGREEN |
| Product Name | 1-in-2-out HDMI Splitter |
| Model No. | CM569-90513 |
| Chip | IT66630_QFN64 + MS8006_TSS0P20 |
| Input Port | 1*HDMI |
| Output Port | 2*HDMI |
| Input Voltage | 5V-12V |
| Resolution | 4K@60Hz |
| Shell Material | PC+ABS |
| Dimensions (L x W x H) | 77mm x 51mm x 24mm (approx.) |
| Features | HDMI 2.0, HDCP 2.2, 3D, HDR, EDID Management |

Image: Illustration of the smart chip (IT66630_QFN64 + MS8006_TSS0P20) for high-speed decoding and low latency.
7. Troubleshooting
- No Picture/Signal:
- Ensure all HDMI cables are securely connected to both the splitter and your devices.
- Verify the power adapter is correctly connected and the POWER LED is on.
- Check that your source device is powered on and outputting an HDMI signal.
- Try connecting the HDMI source directly to one display to confirm the source and display are working.
- Adjust the EDID switch on the splitter to a different position to see if it resolves compatibility issues.
- Flickering Screen or Poor Picture Quality:
- Ensure you are using high-quality HDMI 2.0 cables, especially for 4K@60Hz content.
- Keep HDMI cable lengths within the recommended 5 meters (16.4 feet) for 4K@60Hz. Longer cables may degrade signal quality.
- Check if the resolution settings on your source device are compatible with both connected displays. The splitter will output the lowest common resolution.
- If displays have different resolutions, connect the highest resolution display to HDMI OUT 1.
- No Audio:
- Verify that audio is enabled on your source device and displays.
- Check the audio settings on your source device to ensure it's outputting audio via HDMI.
- Ensure the resolution compatibility note (as above) is considered, as audio can also be affected by resolution negotiation.
- "Only Mirror/Duplicate Screen, Not Extend Mode" Issue:
- This is expected behavior. The UGREEN HDMI Splitter is designed to duplicate the signal, not extend it. If you require an extended desktop, you need an HDMI switch or a graphics card with multiple outputs, not a splitter.
8. User Tips
- Power Supply: Always ensure the splitter is connected to a stable power source using the provided power adapter. Insufficient power can lead to signal drops or instability.
- Cable Quality: Invest in certified high-speed HDMI cables, especially for 4K@60Hz and HDR content, to ensure optimal performance and avoid signal degradation.
- EDID Adjustment: If you experience display issues, experiment with the EDID switch. Often, setting it to copy the EDID from your highest resolution display (usually Output 1) can resolve compatibility problems.
- Hot-Plugging: While HDMI devices generally support hot-plugging, it's good practice to connect all cables before powering on devices to ensure proper signal detection.
9. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the splitter. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handling: Avoid dropping or subjecting the splitter to strong impacts, as this can damage internal components.
10. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official UGREEN website.

Image: Certified HDMI Adapter certificate, indicating compliance with HDMI standards.