ONN 58D1U-FISDB Kuhk5820 K580WDE1 A1

Contents

User Manual: LED Backlight Strips

Model: 58D1U-FISDB Kuhk5820 K580WDE1 A1

1. Product Overview

These LED backlight strips are designed as replacement components for specific ONN 58-inch smart TV models, including 58D1U-FISDB, Kuhk5820, and K580WDE1 A1. They are essential for restoring or maintaining the television's display illumination.

Overview of multiple LED backlight strips

Figure 1: Overview of the LED backlight strips, showing their design and arrangement.

2. Specifications

FeatureSpecification
Model CompatibilityONN 58D1U-FISDB, Kuhk5820, K580WDE1 A1
Strip Length578 mm
LEDs per Strip5 LEDs
Voltage per LED3V
CertificationStandard
Intended UseTV LED Backlight Repair
High-Concerned ChemicalNone
Package Dimensions55 cm (Length) x 3 cm (Width) x 3 cm (Height)
Package Weight0.2 kg

3. Installation and Setup

Replacing LED backlight strips requires technical expertise and careful handling. It is strongly recommended that this procedure be performed by a qualified technician. Incorrect installation can damage the television or the new LED strips.

3.1. Before You Begin:

  1. Ensure the television is completely powered off and unplugged from the main power supply.
  2. Prepare a clean, static-free workspace to prevent damage to sensitive electronic components.
  3. Gather necessary tools, including appropriate screwdrivers, plastic prying tools, and an anti-static wrist strap.

3.2. Installation Steps (General Guide):

  1. Carefully remove the back cover of your television, following your TV's specific service manual instructions.
  2. Locate and disconnect the existing LED backlight strips. Pay close attention to the orientation and connection points.
  3. Gently remove the old LED strips. They may be adhered with adhesive tape.
  4. Install the new LED backlight strips, ensuring they align correctly with the mounting points and connectors. Apply new thermal adhesive tape if necessary.
  5. Connect the power cables to the new LED strips. Observe the polarity markings (+ and -) and the D20 connector as shown in Figure 2.
  6. Before reassembling the TV, perform a preliminary test: temporarily connect the power and check if the new backlights illuminate correctly and evenly.
  7. If the test is successful, carefully reassemble the television, ensuring all screws and covers are securely fastened.
Close-up of LED strip connectors and markings

Figure 2: Close-up view of LED strip connectors and markings (+, -, D20) for proper connection.

Video 1: Product showcase demonstrating the LED backlight strips and their physical characteristics.

4. Maintenance

These LED backlight strips are designed for long-term performance and generally require no routine maintenance after proper installation. To ensure their longevity and optimal performance:

  • Avoid exposing the television to extreme temperatures or high humidity, which can degrade electronic components.
  • Ensure proper ventilation for the television to prevent overheating. Excessive heat can shorten the lifespan of LED components.
  • If the television requires internal cleaning, always unplug it from the power source and use appropriate tools and methods to avoid damaging internal components or the LED strips.

5. Troubleshooting

  • No Backlight After Installation:
    • Check all connections to ensure they are secure and correctly oriented (positive to positive, negative to negative).
    • Verify that the LED strips are indeed compatible with your specific TV model. Refer to the "Specifications" section and your TV's service manual.
    • Ensure the TV's power supply unit and backlight driver board are functioning correctly, as these can also cause backlight issues.
  • Uneven Brightness or Flickering:
    • This could indicate a faulty strip or an issue with the TV's backlight driver board. Inspect each strip for visible damage or loose connections.
    • Ensure all strips are seated properly and making good electrical contact.
  • Difficulty Identifying Correct Model:
    • Always cross-reference the model number on your TV's original backlight strips with the product description. Multiple model numbers might be listed for compatibility, so ensure a precise match.
    • If you are unsure about compatibility, consult a professional TV repair technician or the TV manufacturer's documentation before purchasing or installing.

6. User Tips

  • Verify Compatibility Carefully: As noted in troubleshooting, always double-check that the listed model numbers (e.g., 58D1U-FISDB, Kuhk5820, K580WDE1 A1) precisely match your television's existing backlight strips or the TV model itself. Discrepancies can lead to incompatibility and wasted effort.
  • Handle with Care: LED strips are delicate electronic components. Avoid bending, twisting, or applying excessive force during handling and installation to prevent damage to the LEDs or the circuit board.
  • Secure Packaging: The product is shipped in robust PVC packaging to ensure secure delivery and prevent damage during transit. Keep the packaging for safe storage if you need to store spare strips or return the product.
PVC packaging for LED strips

Figure 3: Example of secure PVC packaging used for the LED strips, designed to protect them during shipping.

7. Warranty and Support

For detailed warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. It is advisable to retain your purchase records for any potential warranty claims.

  • Free Returns: This product may be eligible for free returns within 90 days of purchase. Please consult the seller's specific return policy for detailed terms and conditions.
  • Delivery Guarantees: In the event of delayed delivery, a coupon code may be provided. Refunds are typically available for packages that are lost or arrive damaged.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.