Dooya DM25CE/L

Contents

Dooya DM25CE/L Tubular Curtain Motor Instruction Manual

Model: DM25CE/L

1. Product Introduction

The Dooya DM25CE/L is a small 12V DC tubular motor designed for remote-controlled rolling blinds and curtains. It features an electric limit system and can be powered by various sources, offering flexibility in installation and use.

Functional Features:

  • Electronic Limit: Precise control over blind positions.
  • Stall Protection: Prevents damage to the motor if an obstruction is encountered.
  • Jog & Tilt: Allows for fine adjustments of blind position or slat angle.
  • Program Button: For setting and adjusting motor parameters.
  • Speed Regulation: Control over the rolling speed of the blinds.
  • Memorized Setting: Retains programmed positions even after power loss.
  • Built-in Receiver: For wireless remote control operation.
  • Preferred Stop Position: Allows setting a favorite intermediate position.
  • Reset to Factory Mode: Option to revert all settings to default.
  • DC Power: Operates on 12V DC.
Diagram showing functional features and parameters of Dooya DM25CE/L motor
Figure 1: Functional features and parameters of the DM25CE/L motor.

2. Setup and Installation

Before installation, ensure the motor is suitable for your blind system. The DM25CE/L motor is designed for 38mm alloy tubes. Verify your tube dimensions prior to proceeding.

Motor Components:

Dooya DM25CE/L motor showing various power connection options
Figure 2: The DM25CE/L motor, illustrating its compact design and connection points.
Dooya DM25CE/L motor with length measurement of 30cm (11.8 inches)
Figure 3: Dimensions of the DM25CE/L motor, showing a length of 30cm (11.8 inches).
Close-up of the motor drive end
Figure 4: Detail of the motor's drive end, which connects to the blind tube.
Close-up of the motor's specification label
Figure 5: Specification label on the motor, indicating model, voltage, current, wattage, RPM, weight, and IP rating.

Motor Matching Limit Head:

The motor can be matched with different limit heads. Refer to the specific limit head model for detailed installation instructions. For example, Figure 6 illustrates two types of limit heads:

Diagram showing motor matching limit heads and installation
Figure 6: Motor matching limit head diagram. Figure 1 shows a 306# limit head, and Figure 2 shows a 303# limit head. The motor installation and operation details are typically found on the 306# diagram.

Powering Options and Charging:

The DM25CE/L motor offers flexible power solutions:

  • Direct Power: Can be powered by a DC240(I/J/K) adaptor.
  • Battery Power: Can be powered by a 12V rechargeable battery bar (DC224A).
  • Solar Charging: DC683B solar panels or DC520 chargers can be used to charge DC224A battery bars.
Diagram illustrating charging instructions for the motor with various accessories
Figure 7: Charging instructions, showing connections for adaptor, DC520 charger with DC224A battery, and DC683B solar panel with DC224A battery.

3. Operating Instructions

The DM25CE/L motor is designed for remote control operation. Ensure your remote control (e.g., DC2700, DC2702, DC2760) is paired with the motor according to its specific instructions.

Basic Operation:

  • Use the UP/DOWN buttons on your remote to raise or lower the blinds.
  • The motor supports an electronic limit system, allowing you to set precise upper and lower stopping points.
  • The Jog & Tilt feature enables small adjustments to the blind's position or the angle of slats.

Programming and Settings:

  • Channel Storage: One motor can store a maximum of 20 channels. If you attempt to add more than 20 channels, the system will overwrite the oldest stored channel.
  • Setting Limits: Use the Program Button on the motor or remote (if available) to set the upper and lower travel limits. Consult your remote control's manual for specific programming steps.
  • Preferred Stop Position: You can program a favorite intermediate position for quick access.
  • Speed Regulation: Adjust the motor's rolling speed if supported by your remote control.
  • Reset to Factory Mode: If you need to clear all settings and start fresh, use the Reset to Factory Mode function. Refer to the detailed instructions provided with your remote control for this procedure.
Video 1: Demonstration of the Dooya tubular motor operating blinds with a remote control.

4. Maintenance

To ensure the longevity and optimal performance of your Dooya DM25CE/L motor, follow these simple maintenance guidelines:

  • Cleaning: Periodically wipe the motor and surrounding areas with a dry, soft cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
  • Connections: Ensure all power and signal connections are secure and free from damage.
  • Obstructions: Regularly check the blind's path for any obstructions that could hinder movement and cause motor strain.
  • Battery (if applicable): If using a battery bar, ensure it is charged regularly according to the charging instructions.

No user-serviceable parts are inside the motor housing. Do not attempt to open or repair the motor yourself.

5. Troubleshooting

If you encounter issues with your Dooya DM25CE/L motor, try the following troubleshooting steps:

  • Motor Not Responding:
    • Check the power supply. Ensure the adaptor is plugged in, or the battery bar is charged and properly connected.
    • Verify the remote control battery.
    • Ensure the remote control is within range and paired correctly with the motor.
  • Blinds Not Moving to Correct Position:
    • The electronic limits may need to be reset or reprogrammed. Refer to the "Operating Instructions" section or your remote control manual.
    • Check for any physical obstructions preventing the blinds from reaching their set limits.
  • Unusual Noises:
    • Stop operation immediately.
    • Check for any foreign objects or damage to the blind mechanism or motor.
    • If the noise persists after checking for obstructions, contact customer support.

If these steps do not resolve the issue, please contact customer support for further assistance.

6. Specifications

ParameterValue
Model NumberDM25CE/L
Rated Voltage12V DC
Emission Frequency433.92MHz
Working Temperature-10°C ~ +55°C
Rolling Speed32 RPM
Wattage10W
Current1.0A
Length30 cm (11.8 inches)
Weight0.255 kg
IP RatingIP20
OriginMainland China

7. User Tips

  • Tube Compatibility: Always double-check that your blind's alloy tube has a 38mm diameter to ensure proper fit and function with the DM25CE/L motor.
  • Power Source Flexibility: Take advantage of the multiple power options (adaptor, battery, solar) to best suit your installation environment and preferences.
  • Remote Channel Management: Be mindful of the 20-channel limit for each motor. Plan your remote control setup accordingly to avoid overwriting existing channels.

8. Warranty and Support

For warranty information, detailed technical support, or any further questions regarding your Dooya DM25CE/L Tubular Curtain Motor, please contact the seller or manufacturer directly. Ensure you have your purchase details and model number ready for faster service.

You may also reach out via WhatsApp for inquiries: +8613757580836.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.